54, Ezra Street , Kolkata - 700001 , West Bengal, IndiaMonday to Saturday, 10:30 am to 6:30 pm

Industrial Supply Syndicate Kolkata, since 1977 Send an enquiry
Fluke 435-II Three-Phase Power Quality and Energy Analyser

Fluke 435-II Three-Phase Power Quality and Energy Analyser

Brand
Fluke
Model number
435-II

Class A three-phase power quality and energy analyser with energy loss calculator, transients and flicker; 4 x 6000 A flex probes.

Price and availability on request

Request a quote

Sent with the product details: Fluke 435-II Three-Phase Power Quality and Energy Analyser.

A phone number or an email address is needed, so we can reply.

We use these details only to reply to your enquiry. See our privacy notice.

Downloads

Key features

  • IEC 61000-4-30 Class A compliant
  • Energy loss calculator quantifies the cost of energy wasted by harmonics and unbalance
  • Captures transients, flicker, dips and swells, inrush and mains signalling
  • PowerWave fast RMS data capture
  • Four flexible current probes (6000 A) included
  • 600 V CAT IV / 1000 V CAT III
  • Up to 8 hours on the Li-ion battery

Specifications

Inputs
Voltage inputs4 (3 phase + neutral) dc-coupled; maximum input voltage 1000 Vrms; nominal voltage range selectable 1 V to 1000 V
Max. peak measurement voltage6 kV (transient mode only)
Current inputs4 (3 phase + neutral)
Current range with included i430flex-TF0.5 Arms to 600 Arms (sensitivity 10x); 5 Arms to 6000 Arms (sensitivity 1x)
Sampling16 bit; 200 kS/s on each channel simultaneously
Nominal frequency50 Hz and 60 Hz
Accuracy
Vrms (ac+dc)1 V to 1000 V phase to neutral; resolution 0.01 V; ± 0.1 % of nominal voltage
Amps (ac+dc)5 A to 6000 A (i430-Flex 1x); 0.5 A to 600 A (i430-Flex 10x); ± 0.5 % ± 5 counts
Hz (50 Hz nominal)42.500 Hz to 57.500 Hz; resolution 0.001 Hz; ± 0.01 Hz
Watts (VA, var)max 6000 MW with i430-Flex; ± 1 % ± 10 counts
Power factor0 to 1; resolution 0.001; ± 0.1 % at nominal load conditions
HarmonicsDC, 1 to 50; voltage THD 0.0 % to 100 %, ± 2.5 %
Flicker (Plt, Pst, Pst(1min), Pinst)0.00 to 20.00; ± 5%
UnbalanceVolts 0.0 % to 20.0 %, ± 0.1 %; amps 0.0 % to 20.0 %, ± 1%
Recording
Trend recording time1 hr up to 1 year, user selectable (default 7 days)
Memory8 GB SD card (up to 32 GB)
LoggerUp to 150 PQ parameters measured simultaneously on 4 phases
General
Display153 mm (6.0 in) colour LCD, 320 x 240 pixels
CaseIP51 (in tilt stand position); shock 30 g
Operating temperature0 °C to +40 °C; +40 °C to +50 °C excl. battery
BatteryBP290 Li-ion, up to 8 hours
InterfacesMini-USB-B, isolated USB port for PC connectivity; SD card slot
WarrantyThree years on main instrument, one year on accessories
Supplied with
ContentsTL430 test lead and alligator clip set; Four i430flex-TF 61 cm (24 in) flexible current probes; BP290 Li-ion battery; BC430 power adapter with international plug adapter set; WC100 colour coding clips; 8 GB SD card; PowerLog software CD; USB cable; C1740 soft case

Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.

About the 435-II

The Fluke 435-II locates, predicts and troubleshoots power quality problems in three-phase and single-phase distribution systems and measures to IEC 61000-4-30 Class A. Its energy loss calculator puts a cost on energy wasted through harmonics and unbalance, and it captures dips, swells, transients, flicker, inrush and mains signalling. It is supplied with four flexible current probes and analysis software.

Related products