Skip to content

Power Measurement

Instruments for measuring power, energy and power quality: analysers and loggers, power and energy meters, current sensors and transducers.

All products in Power Measurement

Selec APFC148 Automatic Power Factor Controller APFC148

Selec APFC148 automatic power factor controller: input 3Ø-4 Wire, 3Ø-3 Wire, 2Ø-2 Wire, 1Ø-2 Wire, 90 to 550V AC supply, Modbus RTU (RS485 Interface), panel mount.

Enquire about Selec APFC148
Meco DVM96 Digital Varmeter with Built-in Transducer

Digital panel varmeter with built-in transducer, red LED display; "-" shows export of power. Uni- or bi-directional input chosen when ordering.

Enquire about Meco DVM96
Lutron CP-3000-Y Flexible AC Current Probe, 3000 A, Yellow

Flexible 600 mm current loop with 30, 300 and 3000 A ranges and a 3 V AC output, for the DW-6093 and DW-6095 power analyzers; yellow marking for phase identification.

Enquire about Lutron CP-3000-Y
Kyoritsu KEW 8115 AC/DC Clamp Sensor for Multimeters

AC / DC clamp sensor that extends the current ranges of almost any digital multimeter without breaking the circuit; with the KEW 1051 / 1052 the meter reads directly in amps.

Enquire about Kyoritsu KEW 8115
Veritek VIPS 70L Multifunction Power Meter, LCD

Three-phase multifunction power meter with 4-row LCD, class 0.5S, 8-digit energy display, harmonics (THD) and maximum demand.

Enquire about Veritek VIPS 70L
Multispan DMR-162 Demand Controller

Class 0.5 maximum demand controller and multifunction meter for single and three-phase systems, with THD up to the 32nd order, pulse output and RS-485 Modbus, to keep load within the contract demand.

Enquire about Multispan DMR-162
Minilec D3 PTF1 Frequency Transducer

Minilec D3 PTF1 frequency transducer. Typical uses: instrumentation panel, generator panels, control panels in power plant.

Enquire about Minilec D3 PTF1
Metrel MI 2892 Power Master Class A Power Quality Analyser

Class A power quality analyser to IEC 61000-4-30 for 50/60 Hz, 400 Hz and VFD systems: 5 voltage and 4 current inputs, class 1 power and energy, harmonics, flicker, signalling, waveform and transient recorders.

Enquire about Metrel MI 2892
Proton Power Scanner Power Scanner

Power scanner that switches off the load on unhealthy supply. Runs on 415 V AC 3-phase, relay output rated 30 A at 250 V, door mounting.

Enquire about Proton Power Scanner
Kusam Meco KM-PM-337C Digital Multifunction TRMS Power Meter with Harmonics to 50th, 96 × 96

96 × 96 mm smart power meter for 1- and 3-phase systems: V, A, P, Q, S, PF, 4-quadrant energy, 6 tariffs, harmonics to the 50th with K-factor, demand, unbalance; class 0.5S, RS-485 Modbus to 115200 bps.

Enquire about Kusam Meco KM-PM-337C
Rishabh CBCT 120 Core Balance Current Transformer

Core balance CT with 120 mm window (OD 153 mm) for earth leakage relays: 600:1 ratio, 30 mA - 30 A operating range, class 3 or 15, UL approved, sealable terminal cap.

Enquire about Rishabh CBCT 120
Hioki PW3335-03 Power Meter with External Sensor Terminal

Single-phase power meter with ±0.1% basic accuracy, 1 mA to 20 A ranges (30 A continuous), DC and 0.1 Hz to 100 kHz, SPECpower compatible. Built-in LAN, RS-232C and external sensor terminal.

Enquire about Hioki PW3335-03
Selec APFC346 Automatic Power Factor Controller APFC346

Selec APFC346 automatic power factor controller: input 2Ø - 2W (L-L), 4 digits to show Power factor, 85 to 270V AC supply, panel mount.

Enquire about Selec APFC346
Meco DVM144 Digital Varmeter with Built-in Transducer

Digital panel varmeter with built-in transducer, red LED display; "-" shows export of power. Uni- or bi-directional input chosen when ordering.

Enquire about Meco DVM144
Lutron CP-3001-B Flexible AC Current Probe, 3000 A, Battery Powered, Blue

Battery-powered flexible 600 mm current probe with 30, 300 and 3000 A autorange and banana plug outputs; works with any meter, blue marking for phase identification.

Enquire about Lutron CP-3001-B
Kyoritsu KEW 8121 Load Current Clamp Sensor, 24mm

Load current clamp sensor with a 24 mm jaw for the KEW 5010 and 5020 loggers.

Enquire about Kyoritsu KEW 8121
Veritek VIPS 70L-60 Multifunction Meter, 60 A Direct, LCD

Three-phase multifunction meter for direct connection up to 60 A, LCD, class 0.5S, harmonics (THD) and maximum demand.

Enquire about Veritek VIPS 70L-60
Multispan EDC-351 DC Energy Meter, DIN Rail

DIN-rail DC energy meter with selectable shunt (1 to 9999 A DC), voltage from -1000 to 1000 V DC and power up to 9999 kW, with optional RS-485 Modbus. 35 mm wide.

Enquire about Multispan EDC-351
Minilec D3 RET1 RTD Temperature Transducer

Minilec D3 RET1 RTD temperature transducer, for 24/48 VDC ± 20%, 80-300 VAC/DC, 50Hz supply. Typical uses: test equipments, measurement panel.

Enquire about Minilec D3 RET1
Metrel MI 2893 Power Master XT Class A Power Quality Analyser

Class A three-phase power quality analyser with 1 MSamples/s transient capture on all 8 channels: harmonics, flicker, events, inrush, RVC, waveform recorder, Ethernet and GPS sync; 4.3" colour display.

Enquire about Metrel MI 2893
Kusam Meco KM 2100 Multifunction Power and Harmonics Analyser, Class S, with Flicker, Transients and Inrush

Portable Class S power quality analyser to IEC 61000-4-30 and EN 50160: 1000 V, 5000 A with clamps, harmonics and interharmonics, flicker, transients, inrush, dips and swells, unbalance, energy; 8 GB logging, LAN.

Enquire about Kusam Meco KM 2100
Rishabh CBCT 210 Core Balance Current Transformer

Core balance CT with 210 mm window (OD 250 mm) for earth leakage relays: 600:1 ratio, 30 mA - 30 A operating range, class 3 or 15, UL approved, sealable terminal cap.

Enquire about Rishabh CBCT 210
Hioki PW3335-04 Power Meter with GP-IB, D/A Output and External Sensor Terminal

Single-phase power meter with ±0.1% basic accuracy, 1 mA to 20 A ranges (30 A continuous), DC and 0.1 Hz to 100 kHz, SPECpower compatible. Built-in LAN, RS-232C, GP-IB, D/A output and external sensor terminal.

Enquire about Hioki PW3335-04
Selec APFC347 Automatic Power Factor Controller APFC347

Selec APFC347 automatic power factor controller: input 2Ø - 2W, 1Ø - 2W, 1 Line 4 Digits to show Power Factor, 85 to 270V AC supply, panel mount.

Enquire about Selec APFC347

Show more products