Proton TDS 1 TDS Conductivity Meter
- Brand
- Proton
- Model number
- TDS 1
- Category
- Water Quality Meters
Meter for checking water TDS and conductivity (Proton TDS 1).
Price and availability on request
Key features
- Conductivity and TDS Measurement
- Scrolling message indications
- Inbuilt 10A/230V relay potential free contact (no/ncselectable for high conductivity trip
- Four digit 7 segment bright display
- User programmable through front keys
- Good stability, high reliability
- INTRODUCTION:
- The TDS/Conductivity meter is used for measurement of conductivity of water and can control the plant operation through the set point controlled as programmed by the user
Specifications
| TDS /Conductivity Range | 0-2000ppm |
|---|---|
| Resolution | 0.1ppm |
| Auxiliary Power | 90 to 270V AC, 50 HZ |
| Relay contact ratings | 10A/230V |
| ENCLOSURE | 1] Mounting : Panel mounting. 2] Position : Panel. 3] Enclosure : 96(W)X96(L)X53(D)mm. 4] Cut out :92(L)mm X 92(W)mm. 5] Terminal : Screw ON Terminals. |
| 1. FUN | This key is used to change the controller from RUN mode to FUNCTION mode for parameter setting |
| 2. INC | Up scroll the parameter & parameter value. |
| 3. DEC | Down scroll the parameter & parameter value and to Reset the Trip State.; 1. Relay ON :Green LED Glow- Control Relay ON Not Glowing- Control Relay OFF; 2. TDS :Red LED Glow- TDS Selected Not Glowing- TDS not Selected 3. Conductivity :CONDUCTIVITY LED Glow: Conductivity Selected TDS LED Glow: TDS Selected. |
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
