Test & Measuring Instruments
Portable and bench instruments for electricians, maintenance teams, test labs and quality departments: from multimeters and clamp meters to insulation, earth, power quality and environmental testers.
All products in Test & Measuring Instruments
-
Enquire about MCM Instruments 802T
MCM Instruments 802T Machine Conditioner with IR Temperature
Machine conditioner for imbalance, misalignment and gear faults: vibration velocity, acceleration and displacement plus non-contact infrared temperature from 0 to 550 °C; rechargeable, 600 g.
-
Enquire about Multispan AVH-14-M1
Multispan AVH-14-M1 Multifunction Meter with Separate kWh Display
Class 0.5 panel multifunction meter for single and three-phase systems with a separate kWh display, PT primary up to 520 kV, pulse output and RS-485 Modbus.
-
Enquire about Veritek VIPS 70C-ET
Veritek VIPS 70C-ET Multifunction Power Meter with Ethernet and RS485, LCD
Three-phase multifunction power meter with LCD, Ethernet and RS485, class 0.5S, harmonics to the 31st (on RS485) and maximum demand.
-
Enquire about Minilec D2 PTC1
Minilec D2 PTC1 Current Transducer
Minilec D2 PTC1 current transducer. Typical uses: speed control feedback application, metering & relay panels for substations.
-
Enquire about SEW 276S HD
SEW 276S HD Telescopic High Voltage Detector, Short
Shorter 7-section version of the 276 HD telescopic voltage detector (255 mm closed, 870 mm open): detects 3 kV to 24 kV AC extended and 80 V to 600 V AC retracted, with LED, buzzer and self-test.
-
Enquire about Masibus LC12
Masibus LC12 iCAL Loop Calibrator
Masibus LC12 iCAL loop calibrator. For loop check and calibration, calibration of transmitters and transducers.
-
Enquire about Megger DET3TD
Megger DET3TD Digital Earth Resistance Tester
Simple one-button 3-terminal earth tester for 2 and 3 point and bonding tests: 0.01 Ω to 2000 Ω at 2% accuracy, earth voltage to 100 V, 25 V or 50 V output and 40 V pk-pk noise rejection; IP54 kit.
-
Enquire about Motwane DET-20
Motwane DET-20 Digital Earth Tester (without kit)
3½ digit earth tester for earth resistance (3 terminal), soil resistivity (4 terminal) and earth voltage up to 200V, with 128Hz test signal and a rechargeable Ni-MH battery. Instrument only, without the field kit.
-
Enquire about Shanti ITHVP Series
Shanti ITHVP Series Hand Driven High Voltage Insulation Tester, Polycarbonate Body
Hand-cranked analog high voltage insulation tester for cables, motors and electrical components: 2500 V or 5000 V test voltage, ranges up to 0-100000 MΩ; to IS 2992.
-
Enquire about Proton Digital MFM
Proton Digital MFM Digital Multifunction Meter
Meter for measuring and showing electrical parameters (Proton Digital MFM).
-
Enquire about Trustware Technologies DPATT-3L
Trustware Technologies DPATT-3L Three Phase Power Analyser
Three-phase power analyser for transformer and motor testing: 1400 V AC phase to phase, 80 A AC, class 0.1, LED display, 24-bit ADC with DSP.
-
Enquire about Unison CT 0-50AMP
Unison CT 0-50AMP Linear Current Transformer 0-50 A, 0-10 V DC Output, with Buffer
Linear current sensor that turns 0-50 A AC into a proportional 0-10 V DC signal (0.2 V per amp), ±3% of rated value, 47-63 Hz; needs a 14 to 28 V DC buffer supply. Cables up to 25 sq. mm pass through.
-
Enquire about EAPL SNM-03
EAPL SNM-03 Single Channel DC Energy Meter
EAPL DC multifunction meter with RS485, a wide voltage range and programmable shunt ratio, for solar plants, battery monitoring, DC rectifiers and EV chargers.
-
Enquire about Innova MO-6310+
Innova MO-6310+ 10 A Digital Winding cum Contact Resistance Meter
Innova MO-6310+ battery-powered 10 A winding and contact resistance meter, 4-wire, 4½ digit LED, 7 ranges from 2000.0 µΩ to 2000 Ω, for transformers, motors, cables, busbars and relay contacts. Made in India.
-
Enquire about Kusam Meco 213HVD
Kusam Meco 213HVD Capacitive High Voltage Detector (Contact), 11 kV
Capacitive contact high voltage detector for 11 kV systems: threshold 1.65 – 4.4 kV, colour-coded LEDs, built-in proving circuit, auto-on, bridging and spark protection; fits all link sticks.
-
Enquire about HTC Instruments 15S
HTC Instruments 15S Smart Digital Multimeter
Smart digital multimeter with colour display, 5,999 counts, true RMS, temperature, capacitance and frequency/duty cycle, with NCV and live-wire detection. CAT III 600 V.
-
Enquire about Lutron AH-4223
Lutron AH-4223 Vane Anemometer with Humidity and Temperature
Handheld vane anemometer for 0.4 to 30.0 m/s with humidity, dew point and temperature, showing readings in five air velocity units.
-
Enquire about Rishabh 1P RJ12 62-40(40)
Rishabh 1P RJ12 62-40(40) Single Phase RJ12 Current Transformer, 100 mA Output
Single phase square CT 62-40(40) with 100 mA secondary on an RJ12 socket and cable for Rishabh RJ12 meters: 100 A to 800 A primary, class 1 or 0.5, open-circuit protected.
-
Enquire about Fluke 3PR
Fluke 3PR 3-Point Laser Level, Red
Self-levelling red three-point laser level for plumb and level reference points, 6 mm at 30 m.
-
Enquire about CIE CIE-PSI-1
CIE CIE-PSI-1 Phase Sequence Indicator, Rotating Disc Type
Rotating disc phase sequence indicator for three-phase supplies from 100 V to 500 V AC, 25 to 65 Hz: the disc turns to show R-Y-B order. Needs no auxiliary supply. For horizontal use; leads with crocodile clips.
-
Enquire about Hioki 3246-60
Hioki 3246-60 Pencil HiTester
Pencil-type digital multimeter with the test lead built into the body: AC/DC voltage to 600 V, resistance and continuity, with an LED light for test points.
-
Enquire about Meco 27T-AUTO BL
Meco 27T-AUTO BL 3½-Digit 600 A AC Autoranging Digital Clamp Meter with Temperature, TRMS
TRMS 2000-count autoranging clamp meter: 600 A AC, 600 V AC/DC, 20 MΩ, temperature, NCV and clamp torch; 25 mm jaw.
-
Enquire about Kyoritsu KEW 1018H
Kyoritsu KEW 1018H Digital Multimeter, Hard Case
Auto-ranging 4000-count digital multimeter with diode, capacitance and continuity tests. 1018H comes in a hard case; the 1018 has a soft case.
-
Enquire about Waco AET 0-2
Waco AET 0-2 Analogue Earth Tester 0-2 Ω, Single Range, 4 Terminal, Hand Driven
Hand-cranked analogue 4-terminal earth tester from Waco, single range 0-2 Ω, for earth electrode resistance and soil resistivity checks on site, with no batteries to run down.
