Masibus LC12 iCAL Loop Calibrator

Masibus LC12 iCAL loop calibrator. For loop check and calibration, calibration of transmitters and transducers.

Price and availability on request

Easy to read Color Graphical TFT LCD display
Available with EMI/EMC compliance
Rechargeable lithium ion battery with enhanced power control for prolonged battery life
Simultaneously Measure and Source: mA, mV and V with dual readings on display
24 VDC Loop power Supply to power transmitters and loops
2W simulate and Read/ Power mode for in-situ Loop checking and calibration
Step/ Ramp functions with Auto/ Man selection
Switch test with condition (open/closed) indicator
Universal Serial Bus (USB) communication port for charging, data retrieve and firmware upgrade
Data Logging to measure long time drift
Other Features: Max/Min/Average, filter settings, tare facility, adjustable backlight, alarm annunciation (on display and buzzer), automatic Display off

General Specifications
Display mode	Measure + Source, Measure only, Source only, Switch test + Source
Max. input voltage	30 V DC
Temperature coefficient	30 ppm
Input impedance Measure	V, mV >1MΩ mA =10 Ω
Response time	Input <100ms Output <100ms
Load impedance	>10 KΩ for mV/V <750 Ω for mA
Display update rate	10 readings / sec
Isolation	500VDC between measure & source
Data logging	Logged data is stored in a user defined file in internal memory Periodic logging: 150000 readings max
Communication Interface	USB 2.0

Display and Keys
Display	2.4" TFT LCD, 262K Color, Graphical, 42.72 mm x 60.26 mm, 240x320 pixels, White LED backlight
Keys	6 Membrane keys

Special Features
Loop power output	24V DC, +10% (24mA maximum)
HART mA loop resistor	250 Ω + 20%
Special function	Step/Ramp functions: Automatic/Manual, x, x2: for measure & source
Switch test	Potential free contacts Trigger level : 24V, 24mA (2V) Voltage level detection Trigger level : 0 to 30V in 1V steps Input impedance : >1 MΩ

Power supply
Battery type	Rechargeable Li-ion battery pack, 2300mAh 3.7V
Charging time	<5 hours max
Charger supply	100-240 VAC, 50/60 Hz; Output 5V DC@1A
Battery life on full charge	>18 hours max for mA, mV, V measurement with minimum backlight brightness. > 8 hours max for 12mA generation with minimum backlight brightness
Battery status indication	Battery symbol displayed with % power remaining

Environmental
Operating temperature	0 to 55 °C
Operating temperature while charging batteries	0 to 45 °C
Storage temperature	-200 to 60 °C
Relative humidity	30% to 90% non-condensing
Warm-up time	15 minutes

En 61326-1	2013 2014/30/Eu > Low Voltage Directive 2014/68/EU: EN 61010-1:2010 *(Applicable only for CE marked)

Product
Applications	Loop Check and calibration, Calibration of Transmitters and Transducers, Switch Test and calibration, Drift test of Transmitters and Transducer, Calibration service provider, Test and maintenance
Industries	Calibration Lab, Process plant, Dairy plant, Cement Industries, Chemical Industries, Paper Industries, Engineering laboratories, Electronics Industries

Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.