Test & Measuring Instruments
Portable and bench instruments for electricians, maintenance teams, test labs and quality departments: from multimeters and clamp meters to insulation, earth, power quality and environmental testers.
All products in Test & Measuring Instruments
-
Enquire about HTC Instruments AC-IV
HTC Instruments AC-IV Non-Contact AC Voltage Detector
Non-contact AC voltage detector, 12 – 1000 V, with bar-graph LCD showing signal strength, live / neutral and break-point detection, sound and light alarm, IP40.
-
Enquire about Lutron AM-4220
Lutron AM-4220 Cup Anemometer, Handheld, Water Resistant
All-in-one handheld cup anemometer for outdoor wind speed from 0.9 to 35.0 m/s, water resistant, with max/min and a 100-point memory.
-
Enquire about Rishabh 6016 Bluetooth
Rishabh 6016 Bluetooth Bluetooth True RMS Digital Multimeter, 60000 Count
Bluetooth TRMS 60,000-count multimeter: 1000 V, current 600 µA / 6 mA, 60 mA / 600 mA, 6 A / 10 A, 60 mV / 600 mV mV ranges, 100 kHz bandwidth, MIN/MAX/AVG and GO/NO-GO; logs to the Android app.
-
Enquire about Fluke 52 II
Fluke 52 II Dual Input Digital Thermometer
Dual-input contact thermometer showing T1, T2 and T1-T2 with Min/Max/Avg; laboratory accuracy (0.05% + 0.3 °C).
-
Enquire about CIE CIE/222M 3T 0-2/20/200
CIE CIE/222M 3T 0-2/20/200 Earth Tester 0-2-20-200 Ω, Triple Range, 3 Terminal, Hand Driven
CIE/222M hand-cranked 3-terminal earth tester for earth resistance, triple range 0-2-20-200 Ω, in a cast aluminium body. Accuracy ±5% to IS 9223:1979.
-
Enquire about Hioki BT3554-51
Hioki BT3554-51 Battery Tester with Pin Type Lead 9465-10
Handheld battery tester that judges degradation (PASS, WARNING, FAIL) from internal resistance and voltage, even while the battery stays connected: 3 mΩ to 3 Ω, ±6 V to ±60 V. Supplied with pin type lead 9465-10.
-
Enquire about Meco 126B+TRMS
Meco 126B+TRMS 4-Digit TRMS Autoranging Pocket Digital Multimeter
Pocket-size 9999-count TRMS DMM: 999.9 V DC, 750 V AC, 9.999 A, 9.999 MΩ, capacitance, frequency and square wave output.
-
Enquire about Kyoritsu KEW 2007R
Kyoritsu KEW 2007R AC Clamp Meter 1000A, True RMS
True RMS AC clamp meter with 600 / 1000 A auto-ranging and 0.1 A resolution, a fully safe jaw and an over-moulded body for one-hand use. Rated CAT IV 300 V / CAT III 600 V.
-
Enquire about Waco AET 0-50
Waco AET 0-50 Analogue Earth Tester 0-50 Ω, Single Range, 4 Terminal, Hand Driven
Hand-cranked analogue 4-terminal earth tester from Waco, single range 0-50 Ω, for earth electrode resistance and soil resistivity checks on site, with no batteries to run down.
-
Enquire about Metrel MD 9260
Metrel MD 9260 TRMS Photovoltaic Clamp Meter, CAT III 1500 V DC
TRMS clamp meter for photovoltaic systems: DC voltage to 1500 V, AC / DC current to 2000 A, VFD mode, resistance, capacitance, K-type temperature and frequency; 55 mm jaw, CAT III 1500 V DC / CAT IV 1000 V.
-
Enquire about Autonics KRN100-04001-01-0S
Autonics KRN100-04001-01-0S 100 mm Hybrid Recorder KRN100-04001-01-0S
Autonics KRN100-04001-01-0S 100 mm hybrid recorder (KRN100 Series): 320 × 120 pixel resolution, 100-240 VAC 50 / 60 Hz supply, IP50 (front part, IEC standard). Order code note: 4CH*AR4-1*RS485/Ethernet/USB.
-
Enquire about Selec EM369
Selec EM369 CT Operated Energy Meter EM369
Selec EM369 CT operated energy meter: 1 Row of 9 Digits, 40 to 300V AC/DC, 50/60 Hz supply, RS485 and MODBUS RTU, 96 x 96mm, panel mount.
-
Enquire about MCM Instruments EMC-38A
MCM Instruments EMC-38A Digital Motor Checker
Light, handy digital motor checker with two insulation test voltages: 200 MΩ at 500 V DC and 2000 MΩ at 1000 V DC, winding resistance from 200 mΩ, inductance to 2000 mH and rotor bar checks.
-
Enquire about Multispan PQM-16+-M1
Multispan PQM-16+-M1 Power Quality Meter with Data Logging
Power quality meter with THD up to the 32nd order, import / export energy, real-time clock, memory and built-in data logging, plus pulse output and RS-485 Modbus.
-
Enquire about Veritek VIPS 84L-100
Veritek VIPS 84L-100 Energy Meter, 100 A Direct, LCD
Three-phase energy meter for direct connection up to 100 A, two-line backlit LCD for energy and V, A, PF, power and THD.
-
Enquire about Minilec F3 MFM1 to F3 MFM4
Minilec F3 MFM1 to F3 MFM4 Multifunction Meter
Minilec F3 MFM1 to F3 MFM4 multifunction meter.
-
Enquire about SEW ST-1520
SEW ST-1520 Digital Earth Resistance Tester
Compact 3-wire earth resistance tester: 0.01 Ω to 2000 Ω in three ranges plus 0-200 V earth voltage, 2 mA test current that will not trip ELCBs, test timer, data hold and auto power off.
-
Enquire about Kusam Meco 290HD
Kusam Meco 290HD Contact High Voltage Detector, 6 kV to 81.5 kV
Telescopic contact high voltage detector for 6 kV – 81.5 kV AC lines: red flashing light and 50 dB sound, waterproof head, operating start voltage 2.7 kV; 1370 mm retracted, 2450 mm extended.
-
Enquire about HTC Instruments AC-VI
HTC Instruments AC-VI Non-Contact AC Voltage Detector
Non-contact AC voltage detector, 12 – 1000 V, 50 / 60 Hz, with bar-graph LCD showing signal strength, live / neutral and break-point detection, sound and light alarm, IP66.
-
Enquire about Lutron AM-4221
Lutron AM-4221 Cup Anemometer with Temperature, IP65
Handheld cup anemometer for wind speed from 0.9 to 35.0 m/s with temperature measurement, IP65 water resistance and max/min recall.
-
Enquire about Rishabh AECT 12
Rishabh AECT 12 Smart Earth Clamp Tester
Clamp-on earth resistance tester for looped grounding systems: measures 0.01 Ω to 1500 Ω without auxiliary electrodes or disconnecting the earth lead; 65 x 32 mm jaw, 99-reading memory.
-
Enquire about Fluke 54 II B
Fluke 54 II B Dual Input Data Logging Thermometer
Dual-input logging thermometer storing 500 points, with recall on the display and infrared USB export.
-
Enquire about CIE CIE/222M 3T 0-3/30
CIE CIE/222M 3T 0-3/30 Earth Tester 0-3-30 Ω, Dual Range, 3 Terminal, Hand Driven
CIE/222M hand-cranked 3-terminal earth tester for earth resistance, dual range 0-3-30 Ω, in a cast aluminium body. Accuracy ±5% to IS 9223:1979.
-
Enquire about Hioki BT3554-52
Hioki BT3554-52 Battery Tester with Pin Type Lead L2020
Handheld battery tester that judges degradation (PASS, WARNING, FAIL) from internal resistance and voltage, even while the battery stays connected: 3 mΩ to 3 Ω, ±6 V to ±60 V. Supplied with pin type lead L2020.
