Skip to content

Test & Measuring Instruments

Portable and bench instruments for electricians, maintenance teams, test labs and quality departments: from multimeters and clamp meters to insulation, earth, power quality and environmental testers.

All products in Test & Measuring Instruments

Meco 99+ 3 5/6-Digit 600 A AC/DC Digital Clamp Meter with Temperature and Frequency, TRMS

TRMS 6000-count AC/DC clamp meter: 600 A AC/DC, 600 V AC/DC, 100 mF, 60 MΩ, frequency, temperature, LoZ, VFC and NCV; 30 mm jaw.

Enquire about Meco 99+
Kyoritsu KEW 2002PA AC Clamp Meter 2000A, Peak Hold

AC clamp meter for large currents up to 2000 A, with peak hold and big 55 mm tear-drop jaws.

Enquire about Kyoritsu KEW 2002PA
Waco AET 0-10-100-1000 Analogue Earth Tester 0-10-100-1,000 Ω, Triple Range, 4 Terminal, Hand Driven

Hand-cranked analogue 4-terminal earth tester from Waco, triple range 0-10-100-1,000 Ω, for earth electrode resistance and soil resistivity checks on site, with no batteries to run down.

Enquire about Waco AET 0-10-100-1000
Metrel MD 9231 Industrial TRMS AC/DC Current Clamp Meter

Industrial TRMS AC/DC clamp meter: AC, DC and AC+DC current to 1000 A with AmpTip™ low-current range, voltage to 1000 V, resistance, capacitance, frequency, crest capture and non-contact voltage detection.

Enquire about Metrel MD 9231
Autonics KRN100-04000-00-0S 100 mm Hybrid Recorder KRN100-04000-00-0S

Autonics KRN100-04000-00-0S 100 mm hybrid recorder (KRN100 Series): 320 × 120 pixel resolution, 100-240 VAC 50 / 60 Hz supply, IP50 (front part, IEC standard). Order code note: 4CH*KRN-UI2 CARDx2.

Enquire about Autonics KRN100-04000-00-0S
Selec EM2M Direct Energy Meter EM2M

Selec EM2M direct energy meter: 7 Digits, Two Pulse Outputs, 176 to 276V AC (Self – Powered), (45 to 65Hz), RS485 and MODBUS RTU, 35 x 90mm.

Enquire about Selec EM2M
MCM Instruments EMC-28A Digital Motor Checker

Light, handy digital motor checker for motors, generators and transformers: insulation resistance to 200 MΩ at 500 V DC, winding resistance from 200 mΩ and inductance to 2000 mH, with rotor bar checks.

Enquire about MCM Instruments EMC-28A
Multispan MFM-14DC-M1 DC Multifunction Meter

DC multifunction meter for volts (-1500 to 1500 V DC), amps via a ±75 mV shunt, watts, kW and kWh, with two protection relays and RS-485 Modbus.

Enquire about Multispan MFM-14DC-M1
Veritek VIPS 84CD DIN Rail Energy Meter with RS485

DIN-rail three-phase energy meter with RS485, 8-digit energy display and 4-digit display for V, A, PF, kW, frequency and THD.

Enquire about Veritek VIPS 84CD
Minilec D5 PTW1 Active Power Transducer

Minilec D5 PTW1 active power transducer. Typical uses: cogeneration /captive power plants, control & relay panel, metering panels.

Enquire about Minilec D5 PTW1
SEW 8025 LP Digital Loop / PSC Tester

Mains-powered loop impedance and prospective short-circuit current tester for 230 V circuits: 20 Ω to 2000 Ω loop ranges including a 15 mA no-trip range, PSC to 20 kA, voltmeter and wiring check. No battery needed.

Enquire about SEW 8025 LP
Kusam Meco 285-C HD Clip-On High Voltage Indicator, 10 – 22 kV

Clip-on high voltage indicator for cables at 10 – 22 kV: senses the field around the cable without contact and flashes a LIVE warning on its LCD; continuous monitoring, no batteries.

Enquire about Kusam Meco 285-C HD
HTC Instruments 8252 15 kV Digital Insulation Resistance Meter

15 kV digital insulation resistance meter with six test voltages (500 V, 1000 V, 2500 V, 5000 V, 10 kV, 15 kV), up to 50 TΩ, PI and DAR, ramp and filter tests, DC current, capacitance, 500-group memory and USB. Rechargeable.

Enquire about HTC Instruments 8252
Lutron AM-4214SD Hot Wire Anemometer, SD Card Logger

Hot wire anemometer with slim telescopic probe, air temperature and type K/J thermocouple input, logging readings to an SD card in real time.

Enquire about Lutron AM-4214SD
Rishabh 6015 Bluetooth Bluetooth True RMS Digital Multimeter, 60000 Count

Bluetooth TRMS 60,000-count multimeter: 1000 V, current 600 µA / 6 mA, 60 mA / 600 mA, 6 A / 10 A, 60 mV / 600 mV mV ranges, 10 kHz bandwidth, MIN/MAX/AVG and GO/NO-GO; logs to the Android app.

Enquire about Rishabh 6015 Bluetooth
Fluke 28 II Ex Intrinsically Safe True-rms Multimeter

Intrinsically safe true-rms multimeter for hazardous areas (Ex ia IIC T4), IP67, CAT III 1000 V / CAT IV 600 V.

Enquire about Fluke 28 II Ex
CIE CIE/222M 3T 0-2/10/100/1000 Earth Tester 0-2-10-100-1,000 Ω, Four Range, 3 Terminal, Hand Driven

CIE/222M hand-cranked 3-terminal earth tester for earth resistance, four range 0-2-10-100-1,000 Ω, in a cast aluminium body. Accuracy ±5% to IS 9223:1979.

Enquire about CIE CIE/222M 3T 0-2/10/100/1000
Hioki 3561-01 Battery HiTester with GP-IB

Battery HiTester for production lines of small battery packs: internal resistance from 0.01 mΩ to 3.1 Ω and voltage to 20 V DC, sampling from 4 ms; measurement leads sold separately. Built-in GP-IB interface.

Enquire about Hioki 3561-01
Meco 101P+TRMS 3¾-Digit TRMS Autoranging Pocket Digital Multimeter

Pocket-size 4000-count TRMS autoranging DMM: 1000 V DC, 750 V AC, 10 A, 40 MΩ, capacitance and frequency, backlit LCD.

Enquire about Meco 101P+TRMS
Kyoritsu KEW 2002R AC Clamp Meter 2000A

AC clamp meter for large currents up to 2000 A, with peak hold and big 55 mm tear-drop jaws.

Enquire about Kyoritsu KEW 2002R
Waco AET 0-10-100-1000-10000 Analogue Earth Tester 0-10-100-1,000-10,000 Ω, Four Range, 4 Terminal, Hand Driven

Hand-cranked analogue 4-terminal earth tester from Waco, four range 0-10-100-1,000-10,000 Ω, for earth electrode resistance and soil resistivity checks on site, with no batteries to run down.

Enquire about Waco AET 0-10-100-1000-10000
Metrel MD 9235 TRMS Power Clamp Meter, 3-Phase

TRMS power clamp meter for single and three-phase (balanced and unbalanced) loads: AC current to 600 A, voltage to 600 V, apparent, active and reactive power to 600 kVA, power factor and harmonics.

Enquire about Metrel MD 9235
Autonics KRN100-04000-01-0S 100 mm Hybrid Recorder KRN100-04000-01-0S

Autonics KRN100-04000-01-0S 100 mm hybrid recorder (KRN100 Series): 320 × 120 pixel resolution, 100-240 VAC 50 / 60 Hz supply, IP50 (front part, IEC standard). Order code note: 4CH*RS485/Ethernet/USB.

Enquire about Autonics KRN100-04000-01-0S
Selec EM4M Direct Energy Meter EM4M

Selec EM4M direct energy meter: 1 Row of 4 Digits, 2 Rows of 7 Digits, Two Pulse Outputs, RS485 and MODBUS RTU, 70 x 90mm, DIN rail.

Enquire about Selec EM4M

Show more products