Test & Measuring Instruments
Portable and bench instruments for electricians, maintenance teams, test labs and quality departments: from multimeters and clamp meters to insulation, earth, power quality and environmental testers.
All products in Test & Measuring Instruments
-
Enquire about MCM Instruments EMC-28N
MCM Instruments EMC-28N Digital Motor Checker with Stethoscope
Digital motor checker with a built-in electronic stethoscope: insulation resistance to 200 MΩ at 500 V DC, low winding resistance, inductance and rotor bar checks, plus listening for bearing, gear and pump noise.
-
Enquire about Multispan MS-5716RU-M1
Multispan MS-5716RU-M1 16-Channel Scanner with USB Data Logging
16-channel universal-input scanner for thermocouples, RTD, mA and V, with eight alarm / trip relays that can be grouped, USB data logging and RS-485 Modbus.
-
Enquire about Veritek VIPS 84L
Veritek VIPS 84L Energy Meter, LCD
Three-phase energy meter with two-line backlit LCD for energy and V, A, PF, power, frequency and THD; RS485 optional (VIPS 84L-C).
-
Enquire about Minilec D5 PTW2
Minilec D5 PTW2 Reactive Factor Transducer
Minilec D5 PTW2 reactive factor transducer. Typical uses: cogeneration /captive power plants, control & relay panel, metering panels.
-
Enquire about SEW PD-20S
SEW PD-20S High Voltage Probe for Oscilloscopes, 30 kV DC
1000:1 high-voltage probe for oscilloscopes: measures up to 30 kV DC or 20 kV AC with 500 MΩ input impedance and ±1% DC accuracy to 20 kV. Needle and CRT-anode spring tips; 1 m cable.
-
Enquire about Kusam Meco 286SVD
Kusam Meco 286SVD Personal Safety High Voltage Detector, 110 V – 11.4 kV
Wearable personal safety high voltage detector for 110 V – 11.4 kV AC systems: sound and flashing light that speed up as the voltage gets closer, self test, IP68.
-
Enquire about HTC Instruments AC-II
HTC Instruments AC-II AC Voltage Detector Pen
Pen-type AC voltage detector, 90 V to 1000 V AC: the tip glows red and it beeps when voltage is present. Built-in LED flashlight, auto power off, IP40.
-
Enquire about Lutron AM-4215SD
Lutron AM-4215SD Hot Wire Anemometer with Air Flow, SD Card Logger
Hot wire anemometer for air velocity, air flow (CFM/CMM) and temperature that accepts two probes, with real-time SD card data logging.
-
Enquire about Rishabh 6016
Rishabh 6016 True RMS Digital Multimeter, 60000 Count
TRMS 60,000-count multimeter: 1000 V, current 600 µA / 6 mA, 60 mA / 600 mA, 6 A / 10 A, 60 mV / 600 mV mV ranges, 100 kHz bandwidth, MIN/MAX/AVG and GO/NO-GO.
-
Enquire about Fluke 51 II
Fluke 51 II Single Input Digital Thermometer
Single-input contact thermometer for J, K, T and E thermocouples, laboratory accuracy (0.05% + 0.3 °C).
-
Enquire about CIE CIE/222M 3T 0-2/10/100/1000/10000
CIE CIE/222M 3T 0-2/10/100/1000/10000 Earth Tester 0-2-10-100-1,000-10,000 Ω, Five Range, 3 Terminal, Hand Driven
CIE/222M hand-cranked 3-terminal earth tester for earth resistance, five range 0-2-10-100-1,000-10,000 Ω, in a cast aluminium body. Accuracy ±5% to IS 9223:1979.
-
Enquire about Hioki BT3554-50
Hioki BT3554-50 Battery Tester
Handheld battery tester that judges degradation (PASS, WARNING, FAIL) from internal resistance and voltage, even while the battery stays connected: 3 mΩ to 3 Ω, ±6 V to ±60 V. Pin type lead not included.
-
Enquire about Meco 108P+TRMS
Meco 108P+TRMS 3 5/6-Digit TRMS Autoranging Pocket Digital Multimeter
Pocket-size 6000-count TRMS autoranging DMM: 1000 V AC/DC, 10 A, 60 MΩ, capacitance, frequency, temperature, NCV and live test.
-
Enquire about Kyoritsu KEW 2003A
Kyoritsu KEW 2003A AC/DC Clamp Meter 2000A
AC / DC clamp meter with large-diameter transformer jaws, measuring AC and DC currents up to 2000 A, with an output terminal for a recorder.
-
Enquire about Waco AET 0-20
Waco AET 0-20 Analogue Earth Tester 0-20 Ω, Single Range, 4 Terminal, Hand Driven
Hand-cranked analogue 4-terminal earth tester from Waco, single range 0-20 Ω, for earth electrode resistance and soil resistivity checks on site, with no batteries to run down.
-
Enquire about Metrel MD 9250
Metrel MD 9250 Industrial TRMS AC/DC Clamp Meter, CAT IV 1000 V
Industrial TRMS AC/DC clamp meter to 2000 A with autocheck, VFD mode, voltage to 1000 V, resistance to 40 MΩ, capacitance, K-type temperature and frequency; CAT IV 1000 V, optional PC interface.
-
Enquire about Autonics KRN100-04001-00-0S
Autonics KRN100-04001-00-0S 100 mm Hybrid Recorder KRN100-04001-00-0S
Autonics KRN100-04001-00-0S 100 mm hybrid recorder (KRN100 Series): 320 × 120 pixel resolution, 100-240 VAC 50 / 60 Hz supply, IP50 (front part, IEC standard). Order code note: 4CH*KRN-AR4x1.
-
Enquire about Selec EM306
Selec EM306 CT Operated Energy Meter EM306
Selec EM306 CT operated energy meter: 1 row of 9 digits, Pulse Output, RS485 and MODBUS RTU.
-
Enquire about MCM Instruments EMC-38
MCM Instruments EMC-38 Digital Motor Checker
Digital motor checker in a shock-proof rubber case: insulation at 500 V and 1000 V DC up to 2000 MΩ, winding resistance from 200 mΩ and inductance to 2000 mH, for quick on-site motor checks.
-
Enquire about Multispan PM-11
Multispan PM-11 Single Phase Multifunction Meter
Single-phase multifunction meter showing voltage, current, frequency, power factor, kW and kWh. 96 x 96 mm panel size; RS-485 Modbus on request.
-
Enquire about Veritek VIPS 84L-60
Veritek VIPS 84L-60 Energy Meter, 60 A Direct, LCD
Three-phase energy meter for direct connection up to 60 A, two-line backlit LCD for energy and V, A, PF, power and THD.
-
Enquire about Minilec D5 PTW3
Minilec D5 PTW3 Apparent Power Transducer
Minilec D5 PTW3 apparent power transducer. Typical uses: cogeneration /captive power plants, control & relay panel, metering panels.
-
Enquire about SEW PD-28
SEW PD-28 High Voltage Probe for Multimeters, 40 kV DC
1000:1 high-voltage probe for digital multimeters: measures up to 40 kV DC or 28 kV AC with 1000 MΩ input impedance and ±1% DC accuracy to 20 kV. Needle and CRT-anode spring tips; 1 m cable.
-
Enquire about Kusam Meco 287SVD
Kusam Meco 287SVD Personal Safety High Voltage Detector, 110 V – 22.8 kV
Wearable personal safety high voltage detector for 110 V – 22.8 kV AC systems: sound and flashing light that speed up as the voltage gets closer, self test, IP65.
