Automation, Drives & PLC
Drives, controllers, panel meters, relays and accessories for control panels and machines. Choose a category, or send us your panel requirement and we will suggest suitable models.
All products in Automation, Drives & PLC
-
Enquire about Unison UNI 901 MOD TC ONF 60 200 485 CU2 CT60 JK HO
Unison UNI 901 MOD TC ONF 60 200 485 CU2 CT60 JK HO Temperature Control SSR 901, Modbus RS-485, Heat Only, 200 A
Solid state relay with a built-in PID temperature controller for heating, J or K thermocouple input, a Modbus RTU RS-485 link to an HMI or PLC and a CT input for load-failure alarms; 200 A at 24-600 V AC.
-
Enquire about Veritek VIPS 99
Veritek VIPS 99 ON Delay Timer
Compact DIN-rail ON delay / interval timer with 4 ranges up to 60 minutes; 230 V AC or 24 V AC/DC.
-
Enquire about Multispan PIC-6004A
Multispan PIC-6004A Jumbo Display Process Indicator
Large-display process indicator with 4-inch red digits on one or both sides, for 4-20 mA, 0-20 mA or 0-10 V signals, with optional relays and retransmission. For shop-floor display of process values.
-
Enquire about Meco MR65
Meco MR65 Rectangular DC Panel Meter, Clear Acrylic
Clear acrylic rectangular DC panel meter, moving coil, ±2.5% of full scale; µA, mA, A (shunt) and mV / V ranges.
-
Enquire about Adi-Artech TTD
Adi-Artech TTD Rotary Torque Transducer
Adi-Artech strain gauge rotary torque transducer, 0 - 10 NM to 0 - 50 KNM for clockwise and anticlockwise torque, in SS 17-4 PH stainless steel, IP65 sealed. For electrical tool testing, axle/shaft torsion test, bearing friction measuring.
-
Enquire about Minilec S2 DVMR
Minilec S2 DVMR Phase Failure Relay
Minilec S2 DVMR phase failure relay with (1 CO + 1 CO) / 2 CO output. Typical uses: hoist motor control, 3 ph. split AC machines, agricultural pump starters.
-
Enquire about Kusam Meco TWP
Kusam Meco TWP Potentiometer / Level / Position Transmitter
Potentiometer, level and position transmitter: 2-wire 0 – X Ω (X up to 10K) or 3-wire 200 Ω – 10 kΩ input to an isolated output, ±0.2%.
-
Enquire about Autonics BEN300-DDT
Autonics BEN300-DDT Universal AC / DC Photoelectric Sensor BEN300-DDT
Autonics BEN300-DDT universal AC / DC photoelectric sensor (BEN Series): sensing distance 300 mm, Diffuse reflective, ≤ 200 mA, IP50 (IEC standard). Order code note: DC12-24V.
-
Enquire about Selec FD600M
Selec FD600M Vector Control AC Drive FD600M
Selec FD600M vector control AC drive: output 0–Input Voltage, voltage deviation ≤3%, Modbus RS485.
-
Enquire about Delta DVP-SE2
Delta DVP-SE2 Slim Ethernet PLC
Slim PLC with dual Ethernet ports (switch) for daisy chains, 64k steps, 16 DI / 12 DO, up to 512 I/O, 2 RS-485, USB, CAN for 8 Delta servos, and 100 kHz counters and position outputs.
-
Enquire about Rishabh DPM PF 96x96
Rishabh DPM PF 96x96 4 Digit Power Factor DPM, 96 x 96 mm
4 digit power factor DPM, 96 x 96 mm, for single phase, 3 phase 3 wire or 4 wire networks: 0.1 lag...1...0.1 lead, accuracy ±2°; fixed 1 A or 5 A CT input.
-
Enquire about Unison UNI 901 PHT 24 25 420 AL5
Unison UNI 901 PHT 24 25 420 AL5 Phase Angle Control SSR 901, Analog Input, 25 A
45 mm hockey-puck phase-angle thyristor controller (901 series) that varies the power to 25 A AC loads at 230 or 440 V AC in proportion to a 4-20 mA or 0-10 V DC signal.
-
Enquire about Veritek VIPS 99C
Veritek VIPS 99C Cyclic Timer
DIN-rail cyclic timer with unequal ON and OFF times (ON first or OFF first), 5 ranges up to 3 hours; 230 V AC or 24 V AC/DC.
-
Enquire about Multispan PID-2301-1C
Multispan PID-2301-1C PID Controller with Ampere Indication, 1 Output
PID temperature controller for J / K thermocouples that also shows the load current from a single or three-phase CT up to 60 A. 3-line display (SV, PV, amps) and one relay output.
-
Enquire about Meco MR65EDM
Meco MR65EDM Educational Desk Stand Meter, DC
Educational desk stand meter, clear acrylic rectangular moving coil DC, ±2.5% of full scale, for school and college laboratories.
-
Enquire about Adi-Artech TTD-F-SQD
Adi-Artech TTD-F-SQD Rotary Torque Transducer
Adi-Artech strain gauge rotary torque transducer, 0-10 NM to 0-50 KNM for clockwise and anticlockwise torque, in stainless steel, IP65 sealed. For engine test dynamometer, torque measurement in automotive & aerospace.
-
Enquire about Minilec S2 ELR1
Minilec S2 ELR1 Earth Fault / Earth Leakage Relay
Minilec S2 ELR1 earth fault / earth leakage relay with 2 CO output.
-
Enquire about Kusam Meco TWP2
Kusam Meco TWP2 Potentiometer / Level / Position Transmitter, Dual Output
Potentiometer, level and position transmitter: 2-wire 0 – X Ω (X up to 10K) or 3-wire 200 Ω – 10 kΩ input to two isolated outputs, ±0.2%.
-
Enquire about Autonics BEN300-DFR
Autonics BEN300-DFR Universal AC / DC Photoelectric Sensor BEN300-DFR
Autonics BEN300-DFR universal AC / DC photoelectric sensor (BEN Series): sensing distance 300 mm, Diffuse reflective, ≤ 200 mA, IP50 (IEC standard). Order code note: DC24-240V/AC24-240V.
-
Enquire about Selec Flexys GT35
Selec Flexys GT35 PLC with HMI Flexys GT35
Selec Flexys GT35 PLC with HMI: 100 to 270 VAC / 18 to 30 VDC supply, RS485 Based MODBUS RTU Protocol, 99 x 99mm, panel mount.
-
Enquire about Delta DVP-S Expansion Modules
Delta DVP-S Expansion Modules DVP-S Slim Expansion Modules
Modules for DVP-S slim PLCs: 8 to 64-point digital I/O, 2, 4 and 6-channel analog I/O, load cell, RTD and thermocouple modules, network modules such as PROFINET, EtherNet/IP and BACnet MS/TP, and remote I/O.
-
Enquire about Rishabh DPM Power 72x144
Rishabh DPM Power 72x144 4 Digit Power DPM (kW / kVAr / kVA), 72 x 144 mm
4 digit power DPM, 72 x 144 mm: active (import / export), reactive or apparent power of single or three phase networks, CT / PT and network type set on site; 0.5% active power.
-
Enquire about Unison UNI 901 PHT 24 40 420 AL5
Unison UNI 901 PHT 24 40 420 AL5 Phase Angle Control SSR 901, Analog Input, 40 A
45 mm hockey-puck phase-angle thyristor controller (901 series) that varies the power to 40 A AC loads at 230 or 440 V AC in proportion to a 4-20 mA or 0-10 V DC signal.
-
Enquire about Veritek VIPS 99D
Veritek VIPS 99D ON Delay / Interval Timer
DIN-rail timer with ON delay or interval mode and 10 ranges from 0.1 s to 30 hours; 230 V AC or 24 V AC/DC.