Autonics BEN300-DFR Universal AC / DC Photoelectric Sensor BEN300-DFR
- Brand
- Autonics
- Model number
- BEN300-DFR
- Category
- Photoelectric Sensors
Autonics BEN300-DFR universal AC / DC photoelectric sensor (BEN Series): sensing distance 300 mm, Diffuse reflective, ≤ 200 mA, IP50 (IEC standard). Order code note: DC24-240V/AC24-240V.
Price and availability on request
Key features
- Small and power supply built-in type
- Easy installation with indicators on product
- Light ON / Dark ON mode selectable by switch
- Status and output indication
- Built-in IC photo diode for disturbing light and electrical noise
Specifications
| Series | BEN Series |
|---|---|
| Order code description | DC24-240V/AC24-240V |
| Catalogue model group | BEN300-D□ |
| Sensing type | Diffuse reflective |
|---|---|
| Sensing distance | 300 mm |
| Sensing target | Opaque, translucent materials |
| Hysteresis | ≤ 20 % of sensing distance |
| Response time | AC/DC power, relay contact output model: ≤ 20 ms DC power, solid state (transistor) output model: ≤ 1 ms |
| Light source | Infrared |
| Peak emission wavelength | 940 nm |
| Sensitivity adjustment | YES (Adjuster) |
| Operation mode | Light ON mode - Dark ON mode selectable (Adjuster) |
| Indicator | Operation indicator (red), stability indicator (green), power indicator (red) |
| Unit weight (AC/DC power) | ≈ 195 g |
| Unit weight (DC power) | ≈ 187 g |
| Output method | DC power, solid state (transistor) output |
| Power supply | 12-24 VDC ± 10 % (ripple P-P: ≤ 10 %) |
| Power / current consumption | It depends on the sensing type |
| Through-beam | Emitter: ≤ 50 mA, receiver: ≤ 50 mA |
| Reflective | ≤ 50 mA |
| Control output | NPN open collector - PNP open collector simultaneous output |
| Load voltage | ≤ 30 VDC |
| Load current | ≤ 200 mA |
| Residual voltage | NPN: ≤ 1 VDC , PNP: ≤ 2.5 VDC |
| Protection circuit | Reverse power protection circuit, output short overcurrent protection circuit |
| Protection rating | IP50 (IEC standard) |
| Connection | Cable type |
| Material | Case and case cover: heat resistant ABS, sensing part: PC (polarized retroreflective: PMMA) |
| Sold separately | Reflector: MS Series; Retroreflective tape: MST Series |
|---|
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about Autonics BA2M-DDT
Autonics BA2M-DDT Diffuse Reflective Long-Distance Photoelectric Sensor BA2M-DDT
Autonics BA2M-DDT diffuse reflective Long-Distance photoelectric sensor (BA Series): sensing distance 2 m, Diffuse reflective, ≤ 100 mA, IP64 (IEC standard). Order code note: 12-24VDC VR IMPROVEMENT.
-
Enquire about Autonics BA2M-DDT-P
Autonics BA2M-DDT-P Diffuse Reflective Long-Distance Photoelectric Sensor BA2M-DDT-P
Autonics BA2M-DDT-P diffuse reflective Long-Distance photoelectric sensor (BA Series): sensing distance 2 m, Diffuse reflective, ≤ 100 mA, IP64 (IEC standard). Order code note: 12-24VDC VR IMPROVEMENT.
-
Enquire about Autonics BA2M-DDTD-P
Autonics BA2M-DDTD-P Diffuse Reflective Long-Distance Photoelectric Sensor BA2M-DDTD-P
Autonics BA2M-DDTD-P diffuse reflective Long-Distance photoelectric sensor (BA Series): sensing distance 2 m, Diffuse reflective, ≤ 100 mA, IP64 (IEC standard). Order code note: 12-24VDC VR IMPROVEMENT.
-
Enquire about Autonics BC15-LDT-C
Autonics BC15-LDT-C Color Mark Photoelectric Sensor BC15-LDT-C
Autonics BC15-LDT-C color mark photoelectric sensor (BC Series): sensing distance 15 mm ± 2 mm, Convergent reflective, ≤100 mA, IP67 (IEC standard). Order code note: 12-24VDC.
