Kusam Meco TWP2 Potentiometer / Level / Position Transmitter, Dual Output

Potentiometer, level and position transmitter: 2-wire 0 – X Ω (X up to 10K) or 3-wire 200 Ω – 10 kΩ input to two isolated outputs, ±0.2%.

Price and availability on request

Isolates and converts DC signals for PLC, SCADA and control circuits
Input and output chosen when ordering; DIP-switch selectable for standard signals
Fire-retardant polycarbonate case, DIN rail or wall mounting

Model
Accuracy	±0.2% of rated output
Input	A: 0 – X Ω 2-wire (X = 0 – 10K), fixed range; B: 0 – (200 … 10K Ω) 3-wire, programmable range
Outputs	2 × DC 0 – 10 mA, 0 – 20 mA, 4 – 20 mA, 0 – 5 V, 1 – 5 V or 0 – 10 V
Output load	DC current mode > 750 Ω at 20 mA; DC voltage mode 10 mA maximum
Aux. power codes	C DC 22 – 72 V; F AC/DC 85 – 265 V

General
Insulation resistance	> 100 MΩ / DC 500 V
Linearity and repeatability	≤ 0.1% typical
Stability	≤ 0.2% / year
Output load	DC current mode > 750 Ω at 20 mA; DC voltage mode 10 mA maximum
Common mode rejection	> 120 dB, DC to 60 Hz
Adjust range	Span and zero ±10%
Response time	≤ 400 ms
Ripple	≤ 0.1% rms of rated output
Temperature coefficient	≤ 100 ppm / °C from 0 – 60 °C; ≤ 50 ppm at 25 °C ± 5 °C
Operating conditions	−5 °C – +55 °C, 20 – 95% RH non-condensing
Storage temperature	−10 °C – +70 °C
Aux. power	AC/DC 85 – 265 V or 22 – 72 V; effect ≤ 0.03% / V
Housing	Non-combustible PC, UL 94 V-0
Mounting	DIN rail or wall
Dimensions	27 mm (W) × 119 mm (H) × 72 mm (L)
CE conformity	EMI EN 61000-6-4; EMS EN 61000-6-2; LVD EN 61010-1

Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.