Skip to content

Automation, Drives & PLC

Drives, controllers, panel meters, relays and accessories for control panels and machines. Choose a category, or send us your panel requirement and we will suggest suitable models.

All products in Automation, Drives & PLC

Adi-Artech TTD-SS Rotary Torque Transducer

Adi-Artech strain gauge rotary torque transducer, 0 - 10 NM to 0 - 50 KNM for clockwise and anticlockwise torque, in SS 17-4 PH stainless steel, IP65 sealed. For electrical tool testing, axle/shaft torsion test, bearing friction measuring.

Enquire about Adi-Artech TTD-SS
Minilec S2 ETM2 Cyclic Timer

Minilec S2 ETM2 cyclic timer with 1 CO + 1 CO output. Typical uses: industrial washing machine control panel.

Enquire about Minilec S2 ETM2
Kusam Meco TWS Current Loop Supply Isolating Transmitter

Loop supply isolator: powers a 2-wire 4 – 20 mA transmitter (DC 24 V, 35 mA max.) and gives an isolated output (DC 0 – 10 mA, 0 – 20 mA, 4 – 20 mA, 0 – 5 V, 1 – 5 V or 0 – 10 V), ±0.1%.

Enquire about Kusam Meco TWS
Autonics BF4G-R Button Adjustment Fiber Optic Amplifier BF4G-R

Autonics BF4G-R button adjustment fiber optic amplifier (BF4 Series): ≤ 50 mA ; ≤ 100 mA. Order code note: 12-24VDC(NEW).

Enquire about Autonics BF4G-R
Selec Flexys TX4 PLC Flexys TX4

Selec Flexys TX4 PLC: 100 to 270 VAC / 18 to 30 VDC supply, 99 x 99mm, panel mount.

Enquire about Selec Flexys TX4
Delta DVP-SV3 Third Generation Slim PLC

Slim DVP PLC with the AS processor (25 ns), 64K steps, 16 DI / 12 DO built in and up to 512 I/O with 8 modules per side, Ethernet, 2 RS-485, CAN, USB and micro SD. NPN, relay or PNP output models.

Enquire about Delta DVP-SV3
Rishabh Eine+ 96x96 4 Digit DC Voltmeter / Ammeter DPM, 96 x 96 mm

Programmable 4 digit DC voltmeter or ammeter DPM, 96 x 96 mm: mV, V, mA (4-20 mA) and A inputs, display scaling -9999 to +9999 with linear or bent characteristic; class 0.5.

Enquire about Rishabh Eine+ 96x96
Unison UNI 901 PHT 24 150 420 CU2 Phase Angle Control SSR 901, Analog Input, 150 A

45 mm hockey-puck phase-angle thyristor controller (901 series) that varies the power to 150 A AC loads at 230 or 440 V AC in proportion to a 4-20 mA or 0-10 V DC signal.

Enquire about Unison UNI 901 PHT 24 150 420 CU2
Veritek VIPS 101 Three-Phase Voltage Monitoring Relay

Slim DIN-rail three-phase relay for under voltage, over voltage and phase reversal, ±25% set point, 0.2 – 10 s delay.

Enquire about Veritek VIPS 101
Multispan PM-112 Three Phase Power Analyzer

Self-powered three-phase 4-wire power analyzer with a 4+4+4-digit red LED display showing power factor and kW, for 173-467 V AC line voltage. 96 x 96 mm panel size.

Enquire about Multispan PM-112
Meco MR135 Panel Meter, DC, Bakelite Case

DC moving coil panel meter in a black bakelite case with glass front, ±1.0% of full scale; ranges as the MR120.

Enquire about Meco MR135
Adi-Artech TTD-SS (with RPM) Rotary Torque Transducer with RPM

Adi-Artech strain gauge rotary torque transducer with RPM, 0-20 NM to 0-50 KNM for clockwise and anticlockwise torque, in SS 17-4 PH stainless steel, IP65 sealed. For electrical tool testing, axle/shaft torsion test, bearing friction measuring.

Enquire about Adi-Artech TTD-SS (with RPM)
Minilec S2 FMR1 Frequency Monitoring Relay

Minilec S2 FMR1 frequency monitoring relay with 1 CO + 1 CO / 2 CO output, for 240 V AC ± 20% supply. Typical uses: AMF panels, generator panels, induction heater control panels.

Enquire about Minilec S2 FMR1
Kusam Meco TWS2 Current Loop Supply Isolating Transmitter, Dual Output

Loop supply isolator: powers a 2-wire 4 – 20 mA transmitter (DC 24 V, 35 mA max.) and gives two isolated outputs (DC 0 – 10 mA, 0 – 20 mA, 4 – 20 mA, 0 – 5 V, 1 – 5 V or 0 – 10 V), ±0.1%.

Enquire about Kusam Meco TWS2
Autonics BF4GP Button Adjustment Fiber Optic Amplifier BF4GP

Autonics BF4GP button adjustment fiber optic amplifier (BF4 Series): ≤ 50 mA ; ≤ 100 mA. Order code note: 12-24VDC(NEW).

Enquire about Autonics BF4GP
Selec HC205 Humidity Controller HC205

Selec HC205 humidity controller: 4+4 digits, output Relay, 90-270V AC/DC supply, 72 x 72mm, panel mount.

Enquire about Selec HC205
Delta DVP-SX Slim PLC with Analog I/O, 8K Steps

Slim PLC with 4 DI / 2 DO and 2 AI / 2 AO built in, up to 230 I/O, 8K steps, RS-232 and RS-485 with Modbus, and pulse outputs up to 50 kHz.

Enquire about Delta DVP-SX
Rishabh Eine 48x96 4 Digit AC Voltmeter / Ammeter DPM, 48 x 96 mm

4 digit AC voltmeter or ammeter DPM, 48 x 96 mm, for 3 phase 4 wire, 3 wire or single phase networks: replaces several analog meters, programmable CT / PT, class 1 or 0.5.

Enquire about Rishabh Eine 48x96
Unison UNI 901 PHT 24 200 420 CU2 Phase Angle Control SSR 901, Analog Input, 200 A

45 mm hockey-puck phase-angle thyristor controller (901 series) that varies the power to 200 A AC loads at 230 or 440 V AC in proportion to a 4-20 mA or 0-10 V DC signal.

Enquire about Unison UNI 901 PHT 24 200 420 CU2
Veritek VIPS 102 Under Voltage Relay with Delayed Restart

Slim DIN-rail under voltage relay with delayed restart (5 – 15 min), for 1- or 3-phase systems.

Enquire about Veritek VIPS 102
Multispan PM-133 Three Phase Power Meter

Three-phase 4-wire power meter with 3+3-digit white LED display showing power factor and kW, for 87-519 V AC line voltage. 96 x 96 mm panel size.

Enquire about Multispan PM-133
Meco PFT Power Factor Transducer

DIN-rail power factor transducer, 0.5 lag – 1 – 0.5 lead, 1 A / 5 A and 63.5 – 440 V inputs, isolated 4 – 20 mA or 0 – 10 V output, ±0.5% of span.

Enquire about Meco PFT
Adi-Artech TTD-SS (with RPM and angle) Rotary Torque Transducer with RPM - Angle

Adi-Artech strain gauge rotary torque transducer with RPM - angle, 0-20 NM to 0-10 KNM for clockwise and anticlockwise torque, in SS 17-4 PH stainless steel, IP65 sealed.

Enquire about Adi-Artech TTD-SS (with RPM and angle)
Minilec S2 TSR1 Digital Time Switch

Minilec S2 TSR1 digital time switch, for 100-120/220-240VAC±10% supply.

Enquire about Minilec S2 TSR1

Show more products