Automation, Drives & PLC
Drives, controllers, panel meters, relays and accessories for control panels and machines. Choose a category, or send us your panel requirement and we will suggest suitable models.
All products in Automation, Drives & PLC
-
Enquire about Unison UNI 802 ZDA 33 06 00
Unison UNI 802 ZDA 33 06 00 Slim Plug-in Solid State Relay 802 with Socket, DC to AC Zero Cross, 2 A
Slim plug-in zero-cross relay supplied with a socket that has press-fit wire terminals, a polarity-free 6-32 V DC input and a jumper for +ve or -ve common; switches 2 A at 24-330 V AC.
-
Enquire about Veritek VIPS 27 Hz
Veritek VIPS 27 Hz Analog Frequency Meter
Moving-pointer analog panel meter for frequency, knife-edge pointer (34 mm), 0 – 90° deflection, swivel-screw panel fixing.
-
Enquire about Multispan DC-24
Multispan DC-24 DC Amp + Volt Combined Meter, 72 x 72
Compact 72 x 72 mm DC meter showing current (-999 to 9999 A via shunt), voltage (-1500 to 1500 V DC) and power, with RS-485 Modbus. 24-270 V AC/DC supply.
-
Enquire about Meco DPI-14445SN
Meco DPI-14445SN 4½-Digit Programmable Process Indicator with RS485
4½-digit (19999 count) programmable process indicator with 25.4 mm red LED display, zero and span set in software; RS485 Modbus optional.
-
Enquire about Adi-Artech 60610
Adi-Artech 60610 Single Point Miniature Load Cell
Adi-Artech strain gauge single point miniature load cell, 0-100 Gmf to 0-2000 Gmf for compression loads, in aluminium, IP65 sealed. For precision jewelry scales, small bagging machines, thread tension measurement.
-
Enquire about Minilec D3 RET1
Minilec D3 RET1 RTD Temperature Transducer
Minilec D3 RET1 RTD temperature transducer, for 24/48 VDC ± 20%, 80-300 VAC/DC, 50Hz supply. Typical uses: test equipments, measurement panel.
-
Enquire about EAPL ETR-Sa
EAPL ETR-Sa Star Delta Timer, 12 s to 120 s
EAPL ETR-Sa star delta timer from the ETR series, 12 s to 120 s, 1 C-NO star, 1 C-NO delta; TD 100 ms, for 240 V AC supply.
-
Enquire about Masibus LC5296-DC
Masibus LC5296-DC Dual Channel Indicator cum Controller
Masibus LC5296-DC dual channel indicator cum controller: input RTD (Pt100), Current, Voltage. For condition monitoring, heat treatment furnaces.
-
Enquire about Proton MPC-6
Proton MPC-6 GSM Mobile Pump Controller with Starter
Controller for starting and stopping a pump remotely over GSM (Proton MPC-6). Relay output rated 7 A at 250 V.
-
Enquire about Lutron PVB-8219
Lutron PVB-8219 Vibration Controller / Monitor
Panel vibration monitor for acceleration, velocity and displacement from 10 Hz to 1 kHz, supplied with sensor and magnetic base, with control and alarm relays.
-
Enquire about JiGO JG-GP12M-2C
JiGO JG-GP12M-2C Photoelectric Sensor, 12 mm
Jigo JG-GP12M-2C photoelectric sensor, 12 mm, IP67, for detecting objects and levels on machines and conveyors.
-
Enquire about Kusam Meco MMWH
Kusam Meco MMWH Watthour Digital Panel Meter
Bi-directional watthour panel meter for 1φ / 3φ systems, 8-digit red LED (±99999999), ±0.5% RD, dual pulse outputs (+WH / −WH) and RS-485 Modbus; 96 × 48 mm.
-
Enquire about Autonics ATM4-25S
Autonics ATM4-25S W 21.5 × H 28 mm Analog Timer ATM4-25S
Autonics ATM4-25S W 21.5 × H 28 mm analog timer (ATM Series): Relay output, 24 VDC supply. Order code note: 24VDC.
-
Enquire about Selec 800S-1-ON-60S
Selec 800S-1-ON-60S Analog Timer, 22.5 mm DIN Rail 800S-1-ON-60S
Selec 800S-1-ON-60S analog timer, 22.5 mm DIN rail: output 1 C/O SPDT, 230V AC, 415V AC supply, 22.5mm, DIN rail mount.
-
Enquire about Delta C200
Delta C200 Intelligent Vector Control Micro Drive
Vector control micro drive with a built-in PLC of up to 5,000 steps, brake chopper, Modbus RS-485 and CANopen, PM sensorless control and a strengthened thermal and anti-dust design for harsh sites.
-
Enquire about Rishabh 252-PVS
Rishabh 252-PVS 3 Phase 4 Wire Over Voltage Relay, Adjustable Time Delay
3 phase 4 wire AC over voltage relay with user-adjustable time delay up to 10 s and 100 - 125% setpoint, for 57 - 480 V systems; DPDT contacts, auto reset.
-
Enquire about Unison UNI 803 FDZDA 58 40 01
Unison UNI 803 FDZDA 58 40 01 Solid State Relay 803, Fault Detection, DC to AC, 40 A
Slim zero-cross SSR for 40 A heater loads at 80-580 V AC that detects an open or shorted load, a shorted SSR and loss of supply, with a red LED and an isolated fault output for a PLC or buzzer.
-
Enquire about Veritek VIPS 27 MDI
Veritek VIPS 27 MDI Analog Maximum Demand Ammeter
Moving-pointer analog panel meter for maximum demand current, knife-edge pointer (34 mm), 0 – 90° deflection, swivel-screw panel fixing.
-
Enquire about Multispan DC-142
Multispan DC-142 DC Amp + Volt Combined Meter, 96 x 96
DC panel meter showing current, voltage and power together: -999 to 9999 A through a shunt, -1500 to 1500 V DC and up to 9999 kW, with two protection relays and RS-485 Modbus.
-
Enquire about Meco DTI
Meco DTI DC Isolation Transducer / DC-DC Converter
DIN-rail DC isolation transducer: mA or V DC input to an optically isolated, ripple-free 4 – 20 mA or 0 – 10 V output, ±0.5% of span.
-
Enquire about Adi-Artech 60610-L
Adi-Artech 60610-L Single Point Off-Center Load Cell
Adi-Artech strain gauge single point off-center load cell, 0-200 Gmf to 0-2000 Gmf for compression loads, in aluminium, IP65 sealed. For table top weigh scale.
-
Enquire about Minilec D3 TET1
Minilec D3 TET1 Thermocouple Temperature Transducer
Minilec D3 TET1 thermocouple temperature transducer, for 24/48 VDC ± 20%, 80-300 VAC / DC, 50Hz supply. Typical uses: metering panel, automation panel, SPM panels.
-
Enquire about EAPL ETR1-X
EAPL ETR1-X ON Delay Timer, Multirange, 0.3 s to 30 min
EAPL ETR1-X on delay timer from the ETR series (multirange), 0.3 s to 30 min, 1 C/O, for universal 'X' voltage supply.
-
Enquire about Masibus LC5296-XP-DC
Masibus LC5296-XP-DC Flame Proof Dual Channel Indicator cum Controller
Masibus LC5296-XP-DC flame proof dual channel indicator cum controller: input RTD (Pt100), Current, Voltage, Serial. For temperature controlling in reactors, pressure controlling in reactors.
