Proton MPC-6 GSM Mobile Pump Controller with Starter

Controller for starting and stopping a pump remotely over GSM (Proton MPC-6). Relay output rated 7 A at 250 V.

Price and availability on request

1. Fully programmable
2. Suitable for three phase pumps up to 25HP
3. Relay outputs for Star-Delta starters
4. No auxiliary power supply required for controller operation
5. Can be operated in 3 modes such as GSM/AUTO/MANUAL
6. GSM based SMS controlled start/stop and remote monitoring
7. GSM based Interactive Voice Response System (IVRS) controlled start/stop and remote monitoring for 3 registered numbers
8. IVRS – Voice response available in regional language
9. Live Motor operation Status available via SMS as Motor ON/OFF status, Live Fault, phase voltages and current drawn per phase
10. Inbuilt phone book for auto reply in case of faults
11. Complete protection from electrical unhealthy condition
12. All parameters are settable through front key
13. LED indications for alarm (fault) & MOTOR ON
14. Scrolling display of parameters, one by one in scroll mode
15. Three bright 7 segment display on unit
16. Inverse Time trip curve for over load fault
17. It Will give Miss call AT Power ON
The Motor protection unit continuously scans the faults like Under Voltage, Over Voltage, SPP, Reverse Phase, Voltage Unbalance, Under Load, Over Load, Current unbalance

Specifications
Input Supply	3 Phase 415 V, 50 HZ AC (3 Phase 3 wire)
Accuracy	1] Voltage 0.25% ± 1 dgts. 2] Current 0.25% ± 1 dgts.
Output contact Rating	7 A at 250 volt Relay.
Auxiliary Power	No External power is required (Draws power from the voltage signal Inputs)
GSM MODEM	Quad-Band 850/ 900/ 1800/ 1900 MHz
Environmental	1] Working Temp : 0 to 55º C 2] Storage Temp : 10 to 70º C 3] Relative humidity: 0–95 % non-condensive 4] Warm up time : 30 Sec
Enclosure	1] Mounting : Surface mounting. 2] Position : Panel. 3] Terminal : Screw ON Terminals.
KEY’S	SET: This key is used to change the controller from RUN mode to FUNCTION mode for Parameter setting & to save the modified setting in Function mode INC: Up scroll the parameter & parameter value. DEC: Down scroll the parameter & parameter value.
LED’S	1. PUMP ON (GREEN): MOTOR ON. 2 Voltage Fault (RED : SPP, Voltage Unbalance& Reverse Phase Fault. 3. UL (RED) : Under Load 4. OL (RED) : Over Load Fault.

Options
Optional features	Multi-tone selection site selectable.; Silent push button can be provide to mute sound.; Extra Potential free relay output contact can be provide.; operating Supply voltage can be from 20V DC to 60V DC. Or 90 to 270VAC.

Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.