Masibus LC5296-DC Dual Channel Indicator cum Controller
- Brand
- Masibus
- Model number
- LC5296-DC
- Category
- Temperature Controllers
Masibus LC5296-DC dual channel indicator cum controller: input RTD (Pt100), Current, Voltage. For condition monitoring, heat treatment furnaces.
Price and availability on request
Key features
- Input (RTD, Volts, mA)
- Fail-safe Design protecting the process in case of system malfunctioning
- Bright Red seven segment LED Display
- Display brightness control
- Status Indication LEDs
- Relay Output (optional)
- Retransmission output (optional)
- RS485 Modbus Communication (optional)
- Transmitter Power Supply
- Relay/ retransmission output mapping with respect to input no
Specifications
| Input Type | RTD (Pt100), Current, Voltage |
|---|---|
| Display Range | Refer Table-1 |
| ADC Resolution | 16 bits |
| Display Resolution | 0.1 / 1.0 °C |
| Sampling Rate | 2 Samples/Sec |
| Sensor open | All inputs except 0-5V |
| Sensor Burnout current | 0.25uA |
| RTD excitation current | 0.166mA (Approx) |
| NMRR | > 40dB |
| CMRR | > 120dB |
| Temp-co | < 150ppm/°C |
| Input Impedance | > 1MΩ |
| Max Voltage | 20VDC |
| Process Value 1 & 2 | 0.56", 7 segment, Red LED, 4 digits |
|---|---|
| Status LEDs | Relay & Communication |
| Keys | SET1, SET2, Increase, Decrease |
| Relays | 2 Nos. |
|---|---|
| Rating | 5A @ 230VAC / 30VDC |
| Current | 0/4-20mA @500Ω Max |
|---|---|
| Voltage | 0/1-5V, 0-10V @2KΩ Min |
| Interface | RS485 |
| Protocol | Modbus-RTU |
| Baud Rate | 9600, 19200, 38400 |
| Transmitter Supply* | 24VDC (±10%) @60mA |
| Standard | 85-265VAC/ 125-300VDC |
|---|---|
| Optional | 18-36VDC |
| Dimensions (mm) | 96(H) x 96(W) x 75(D) |
|---|---|
| Front Bezel (mm) | 96(H) x 96(W) |
| Panel Cutout (in mm) | 92 x 92 |
| Depth behind Panel (in mm) | 65 |
| Weight | 300g approx. |
| Enclosure Material | Molded ABS |
| Enclosure Protection | IP20 |
| Terminal Cable Size | 2.5mm2 |
| Operating temperature | 0-55 °C |
|---|---|
| Storage temperature | 0-80 °C |
| Humidity | 20-95 %RH non-condensing Table 1: Display Range |
| Input | Input Type / Range |
| RTD | PT-100 (3 wire) / -200 to 850 °C, -199.0 to 850.0 °C |
| Linear | 1-5V/0-5V/ 0-10V DC# 0/4-20mA (Ext 250 Ω) / -1999 to 99 |
| Applications | Condition Monitoring, Heat treatment furnaces, Water heating boilers, Chillers, Oven control |
|---|---|
| Industries | Metal, Cement, Paper, Food Pharma, Power, Oil & Gas, Water |
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about Masibus 5002U-P
Masibus 5002U-P ON/OFF and Proportional Controller
Masibus 5002U-P ON/OFF and proportional controller: input Ranges, output ON/OFF or proportional. For heat treatment furnaces, reheat furnaces.
-
Enquire about Masibus 5006RN / LC5296H
Masibus 5006RN / LC5296H ON/OFF Controller
Masibus 5006RN / LC5296H ON/OFF controller: input Input Type / Range. For heat treatment furnaces, water heating boilers.
-
Enquire about Masibus 5040
Masibus 5040 Auto-Tune PID Single Loop Controller
Masibus 5040 auto-tune PID single loop controller: input Ranges, output 4-20 mA@500 Ω max.. For heat treatment furnaces, reheat furnaces.
-
Enquire about Masibus LC5296-XP-DC
Masibus LC5296-XP-DC Flame Proof Dual Channel Indicator cum Controller
Masibus LC5296-XP-DC flame proof dual channel indicator cum controller: input RTD (Pt100), Current, Voltage, Serial. For temperature controlling in reactors, pressure controlling in reactors.
