Skip to content

Lutron

556 Lutron products listed. For prices and availability, send an enquiry.

Enquire about Lutron

AM-4237SD Vane Anemometer with Humidity Probe, SD Card Logger

Three-in-one kit: vane anemometer with air flow, humidity/temperature probe and type J/K thermometer input, logging to an SD card.

Enquire about AM-4237SD
AM-4247SD Metal Vane Anemometer with Humidity Probe, SD Card Logger

Three-in-one kit with a heavy duty metal vane probe for wide range air velocity and air flow, a humidity/temperature probe and type J/K input, logged to SD card.

Enquire about AM-4247SD
AM-4257SD Cup Anemometer with SD Card Logger

Cup anemometer for outdoor wind speed recording, with a tripod nut on the cup probe, air temperature and type K/J inputs and real-time SD card logging.

Enquire about AM-4257SD
AM-4307SD Vane Anemometer with Air Flow and Thermocouple Input, SD Logger

Vane anemometer for air velocity, air flow (CFM/CMM) and air temperature that also takes a type K/J thermocouple probe, with real-time SD card logging.

Enquire about AM-4307SD
AP-9V110 DC 9 V Power Adapter, 110/120 V AC Input

Linear AC to DC 9 V adapter for 110/120 V AC, 50/60 Hz mains, with a round 2.5 mm output plug, for running Lutron meters without batteries.

Enquire about AP-9V110
AP-9V220 DC 9 V Power Adapter, 220/230 V AC Input

Linear AC to DC 9 V adapter for 220/230 V AC, 50/60 Hz mains, with a round 2.5 mm output plug, for running Lutron meters without batteries.

Enquire about AP-9V220
AP-9VA DC 9 V Regulated Power Adapter, Round Plug

Regulated 9 V DC, 1 A adapter for 100 to 240 V AC mains with a round 2.5 mm output plug; plug converters AP-GTU and AP-GTE change its input plug for US or UK sockets.

Enquire about AP-9VA
AP-9VB DC 9 V Regulated Power Adapter, 006P Battery Snap

Regulated 9 V DC, 1 A adapter for 100 to 240 V AC mains whose output is a 006P battery snap, so it powers meters built for a 9 V battery.

Enquire about AP-9VB
AP-GTE Plug Converter, German to UK Type

Input plug converter that lets the AP-9VA and AP-9VB power adapters, supplied with a German-type plug, fit UK (England) type sockets.

Enquire about AP-GTE
AP-GTU Plug Converter, German to US Type

Input plug converter that lets the AP-9VA and AP-9VB power adapters, supplied with a German-type plug, fit US type sockets.

Enquire about AP-GTU
AQ-9812SD Air Quality Meter, CO2 / O2 / Humidity / Temperature, SD Logger

Multi-probe air quality meter for CO2 (NDIR, 0 to 10,000 ppm), oxygen in air (0 to 30 %), humidity, dew point and temperature, recording two probes at once to an SD card.

Enquire about AQ-9812SD
AQ-9901SD Air Quality Meter, CO2 / CO / O2 / Humidity, SD Logger

Air quality meter that takes up to three probes for CO2 (0 to 4,000 ppm), CO (0 to 1,000 ppm), oxygen and humidity/temperature, with real-time SD card logging.

Enquire about AQ-9901SD
AQ-9912SD Air Quality Meter, CO2 10,000 ppm / CO / O2 / Humidity, SD Logger

Air quality meter for CO2 up to 10,000 ppm, CO up to 1,000 ppm, oxygen and humidity/temperature, logging three probes at a time to an SD card.

Enquire about AQ-9912SD
AQ-9918SD One-probe Air Quality Meter, CO2 / O2 / Humidity / Temperature

Air quality meter whose single probe measures CO2 (0 to 10,000 ppm), oxygen, humidity, dew point and temperature, showing all readings on one screen and logging to SD card.

Enquire about AQ-9918SD
AT-20 Antenna with BNC Connector for Frequency Counter

Antenna with a BNC connector, an optional accessory for picking up radio signals with a Lutron frequency counter; listed for the FC-2500A only.

Enquire about AT-20
AV-102 AC Voltage Bench Meter

Bench AC voltage meter with 2 V, 20 V, 200 V and 600 V ranges, high input impedance and overload protection; CAT II 600 V.

Enquire about AV-102
BB-22 Cable with Double BNC Connectors for Frequency Counter

Test cable with a BNC connector at each end, an optional accessory for connecting signal sources to a Lutron frequency counter input.

Enquire about BB-22
BCT-4308 Bench Conductivity / TDS Meter

Bench conductivity and TDS meter with four ranges from 200 µS to 200 mS, ATC, adjustable temperature coefficient and a large backlit LCD.

Enquire about BCT-4308
BCT-4320SD Bench Conductivity / TDS / Hardness / Resistivity Meter, SD Logger

Bench meter for conductivity (20 µS to 200 mS), TDS, hardness, resistivity and salt, with SD card data logging.

Enquire about BCT-4320SD
BDO-5513SD Bench Dissolved Oxygen Meter, SD Logger

Bench dissolved oxygen meter for 0 to 20.0 mg/L, oxygen in air and temperature, with a BOD bottle probe, salt and altitude compensation and SD card logging.

Enquire about BDO-5513SD
BMG-3004SD Bench Magnetic Meter (Gauss / Tesla), SD Logger

Bench magnetic field meter with milligauss and millitesla ranges, temperature-compensated Hall probe and SD card data logging.

Enquire about BMG-3004SD
BPH-231 Bench pH / ORP Meter

Bench pH and ORP meter for 0 to 14.00 pH and ±1999 mV with auto calibration at pH 7, 4 and 10, ATC option and large backlit LCD.

Enquire about BPH-231
BPH-241SD Bench pH / ORP Meter, SD Logger

Bench pH and ORP meter with auto calibration, separate probe, optional ATC and SD card data logging.

Enquire about BPH-241SD
BTM-4208SD 12-channel Temperature Recorder, SD Card

12-channel thermocouple temperature recorder for type J/K/T/E/R/S probes, logging all channels with time stamps to an SD card.

Enquire about BTM-4208SD

Show more products