Lutron
21 Lutron products listed in this category. For prices and availability, send an enquiry.
Products
-
Enquire about AL-03S
AL-03S Heavy Duty Alligator Clip with Safety Plug
Heavy duty alligator clip with a shrouded safety plug, supplied with the DI-6200 and DI-6300 insulation testers and also usable with multimeters and clamp meters.
-
Enquire about BB-22
BB-22 Cable with Double BNC Connectors for Frequency Counter
Test cable with a BNC connector at each end, an optional accessory for connecting signal sources to a Lutron frequency counter input.
-
Enquire about KV-05
KV-05 Kelvin Clips for Milliohm Meters
Kelvin clip set with two clips and four banana plugs, about 90 cm long, supplied with the MO-2001, MO-2002, MO-2013 and MO-2014 milliohm meters.
-
Enquire about LN-A37
LN-A37 Large Alligator Clip, 1000 V, 20 A
Large alligator clip with a 34 mm jaw opening rated 20 A, CAT III 1000 V / CAT IV 600 V, for test leads such as the LN-S05.
-
Enquire about LN-A40
LN-A40 Little Alligator Clip, 1000 V, 10 A
Insulated alligator clip with an 8.5 mm jaw rated 10 A and 1000 V nominal, for use on the LN-S05 and LN-S07 test leads.
-
Enquire about LN-A41
LN-A41 Alligator Clip Test Lead Set, Right Angle, 1000 V
Test lead set with right-angle 4 mm banana plugs and alligator clips, 750 mm long, rated 10 A, CAT III 1000 V and CAT IV 600 V.
-
Enquire about LN-N01
LN-N01 K-Type Thermocouple Adapter
Adapter that connects a type K thermocouple to the input sockets of a meter, for low voltage use only.
-
Enquire about LN-N02
LN-N02 Flexible Test Probe Tip, 0.75 mm
Flexible 0.75 mm gold-plated probe tip that plugs into any 2 mm test lead, for reaching miniature parts and fine pitch contacts.
-
Enquire about LN-N07
LN-N07 Test Probe Tip, 1 mm Stainless Steel
Stainless steel 1 mm probe tip with a 58 mm shaft for 2 mm test leads, rated 2 A, CAT III 1000 V.
-
Enquire about LN-N13
LN-N13 Mini Test Hook Clip
Mini hook clip on a short lead with a 2 mm jack, rated 2 A and CAT II 300 V, for gripping component legs and thin wires.
-
Enquire about LN-N14
LN-N14 Micro Test Hook Clip
Micro hook clip for very thin wires and IC pins at 1.27 mm spacing, on a short lead with a 2 mm jack, rated CAT II 300 V.
-
Enquire about LN-N19
LN-N19 Little Alligator Clip, 2 mm Jack
Little alligator clip with a 5 mm jaw on a short braided lead with a 2 mm jack, rated 2 A and CAT II 300 V.
-
Enquire about LN-N46
LN-N46 Flat Alligator Clip, 2 mm Jack
Flat-jaw alligator clip on a short braided lead with a 2 mm jack, rated 2 A and CAT II 300 V.
-
Enquire about LN-S05
LN-S05 Safety Test Lead Set, Right Angle, 1000 V
Safety test leads with right-angle 4 mm banana plugs and 2 mm probe tips, 900 mm long, rated 10 A, CAT III 1000 V and CAT IV 600 V.
-
Enquire about LN-S09
LN-S09 Safety Test Lead Set, Straight, 1000 V
Safety test leads with 4 mm banana plugs and 2 mm probe tips, 900 mm long, rated 10 A, CAT III 1000 V and CAT IV 600 V.
-
Enquire about NB-24
NB-24 BNC to N Coaxial Connector Adapter
Adapter from a BNC connector to an N coaxial connector, an optional accessory for Lutron frequency counters with N-type inputs.
-
Enquire about NN-23
NN-23 Direct Probe with Double N Coaxial Connectors
Direct probe cable with an N coaxial connector at each end, an optional accessory for the high frequency inputs of Lutron frequency counters.
-
Enquire about PB-21
PB-21 Direct Probe with BNC Connector and Alligator Clips
Direct probe cable with a BNC connector and a pair of alligator clips, an optional accessory for Lutron frequency counters.
-
Enquire about SMDC-21
SMDC-21 SMD Test Clip
Tweezer-style SMD test clip for LCR meters and multimeters such as the LCR-9183, LCR-9184, LCR-9185SD and DM-9972SD.
-
Enquire about TL-339R
TL-339R Test Lead and Alligator Clip Set
Pair of test leads, one red and one black, with alligator clips, for Lutron meters.
-
Enquire about TLSM-15
TLSM-15 SMD Test Clips, 90 cm
Test clips for measuring SMD resistors, capacitors, inductors and diodes, on a 90 cm cable.
