Lutron

Products

17 products Sort by Recommended Model number Newest

• 

  CA-203 DC/AC Current Clamp Adapter, 2000 A

  Hall effect clamp adapter for AC and DC current up to 2000 A with an 86 mm jaw, giving a voltage output for reading on a multimeter.

  Enquire about CA-203
• 

  CP-200 AC Current Probe, 200 A, for DW-6093 and DW-6095

  Small clamp-on AC current probe with 20 A and 200 A ranges and a 19 mm jaw for the DW-6093 and DW-6095 power analyzers; no recalibration on change.

  Enquire about CP-200
• 

  CP-1200 AC Current Probe, 1200 A, for DW-6092

  Clamp-on AC current probe with 20, 200 and 1200 A ranges and a 50 mm jaw, powered from the DW-6092 power analyzer; swapping probes needs no recalibration.

  Enquire about CP-1200
• 

  CP-1201 AC Current Probe, 1200 A, for DW-6093 and DW-6095

  Clamp-on AC current probe with 20, 200 and 1200 A ranges and a 50 mm jaw, powered from the DW-6093 or DW-6095 power analyzer through banana plugs.

  Enquire about CP-1201
• 

  CP-3000-B Flexible AC Current Probe, 3000 A, Blue

  Flexible 600 mm current loop with 30, 300 and 3000 A ranges and a 3 V AC output, for the DW-6093 and DW-6095 power analyzers; blue marking for phase identification.

  Enquire about CP-3000-B
• 

  CP-3000-R Flexible AC Current Probe, 3000 A, Red

  Flexible 600 mm current loop with 30, 300 and 3000 A ranges and a 3 V AC output, for the DW-6093 and DW-6095 power analyzers; red marking for phase identification.

  Enquire about CP-3000-R
• 

  CP-3000-Y Flexible AC Current Probe, 3000 A, Yellow

  Flexible 600 mm current loop with 30, 300 and 3000 A ranges and a 3 V AC output, for the DW-6093 and DW-6095 power analyzers; yellow marking for phase identification.

  Enquire about CP-3000-Y
• 

  CP-3001-B Flexible AC Current Probe, 3000 A, Battery Powered, Blue

  Battery-powered flexible 600 mm current probe with 30, 300 and 3000 A autorange and banana plug outputs; works with any meter, blue marking for phase identification.

  Enquire about CP-3001-B
• 

  CP-3001-R Flexible AC Current Probe, 3000 A, Battery Powered, Red

  Battery-powered flexible 600 mm current probe with 30, 300 and 3000 A autorange and banana plug outputs; works with any meter, red marking for phase identification.

  Enquire about CP-3001-R
• 

  CP-3001-Y Flexible AC Current Probe, 3000 A, Battery Powered, Yellow

  Battery-powered flexible 600 mm current probe with 30, 300 and 3000 A autorange and banana plug outputs; works with any meter, yellow marking for phase identification.

  Enquire about CP-3001-Y
• 

  CP-3002 Flexible AC Current Probe, 3000 A, 280 mm Loop

  Compact flexible current probe with a 280 mm double-insulated loop, 30, 300 and 3000 A ranges with LED range indication, rated CAT III 1000 V.

  Enquire about CP-3002
• 

  CP-6001-B Flexible AC Current Probe, 6000 A, Blue

  Flexible 900 mm current loop with 60, 600 and 6000 A ranges and a 3 V AC output, for the DW-6093 and DW-6095 power analyzers; blue marking.

  Enquire about CP-6001-B
• 

  CP-6001-R Flexible AC Current Probe, 6000 A, Red

  Flexible 900 mm current loop with 60, 600 and 6000 A ranges and a 3 V AC output, for the DW-6093 and DW-6095 power analyzers; red marking.

  Enquire about CP-6001-R
• 

  CP-6001-Y Flexible AC Current Probe, 6000 A, Yellow

  Flexible 900 mm current loop with 60, 600 and 6000 A ranges and a 3 V AC output, for the DW-6093 and DW-6095 power analyzers; yellow marking.

  Enquire about CP-6001-Y
• 

  EMF-824 EMF Adapter with Separate Probe for Multimeters

  Adapter that turns a digital multimeter on its DC 200 mV range into an EMF meter: 1 mV per milligauss, 30 to 300 Hz, single-axis separate probe.

  Enquire about EMF-824
• 

  LS-04 Current Shunt, 200 A, for DM-9131

  Current shunt for the DM-9131 car tester that gives 1 mV DC per ampere, so the meter can read DC currents up to 200 A.

  Enquire about LS-04
• 

  ST-50 Current Shunt, 50 A / 50 mV

  Current shunt that extends a multimeter to 50 A AC or DC with a 1 mV per ampere output, with overload capacity of 100 A for one minute.

  Enquire about ST-50