Kusam Meco
478 Kusam Meco products listed. For prices and availability, send an enquiry.
Products
-
Enquire about KM-MPS-50K
KM-MPS-50K Multi-Purpose High Voltage AC/DC Phasing Meter
Digital high voltage phasing meter for AC and DC up to 50 kV with direct reading: in-phase / out-of-phase check, polarity indication, 4000-count backlit LCD; master and slave sticks, IP66, IEC 61243-2.
-
Enquire about KM-NG-30
KM-NG-30 Digital Torque Wrench, 30 N·m
Digital torque wrench with adjustable head, 1.5 – 30 N·m, ±2% clockwise / ±2.5% counter-clockwise, peak hold and real-time modes, buzzer and LED at preset torque, 100-record memory.
-
Enquire about KM-NG-60
KM-NG-60 Digital Torque Wrench, 60 N·m
Digital torque wrench with adjustable head, 3 – 60 N·m, ±2% clockwise / ±2.5% counter-clockwise, peak hold and real-time modes, buzzer and LED at preset torque, 100-record memory.
-
Enquire about KM-NG-200
KM-NG-200 Digital Torque Wrench, 200 N·m
Digital torque wrench with adjustable head, 10 – 200 N·m, ±2% clockwise / ±2.5% counter-clockwise, peak hold and real-time modes, buzzer and LED at preset torque, 100-record memory.
-
Enquire about KM-NGM-10
KM-NGM-10 Mini Digital Torque Wrench, 10 N·m
Compact digital torque wrench with replaceable head, up to 10 N·m, ±2% clockwise and counter-clockwise, peak / real-time / preset modes, buzzer and LED at target, 999-reading memory.
-
Enquire about KM-NGM-30
KM-NGM-30 Mini Digital Torque Wrench, 30 N·m
Compact digital torque wrench with replaceable head, up to 30 N·m, ±2% clockwise and counter-clockwise, peak / real-time / preset modes, buzzer and LED at target, 999-reading memory.
-
Enquire about KM-NGM-60
KM-NGM-60 Mini Digital Torque Wrench, 60 N·m
Compact digital torque wrench with replaceable head, up to 60 N·m, ±2% clockwise and counter-clockwise, peak / real-time / preset modes, buzzer and LED at target, 999-reading memory.
-
Enquire about KM-NGM-100
KM-NGM-100 Mini Digital Torque Wrench, 100 N·m
Compact digital torque wrench with replaceable head, up to 100 N·m, ±2% clockwise and counter-clockwise, peak / real-time / preset modes, buzzer and LED at target, 999-reading memory.
-
Enquire about KM-OHM-8500-1
KM-OHM-8500-1 1 A Digital Micro-Ohm Meter
Bench 4-terminal micro-ohm meter, 2 mΩ to 2000 Ω in 7 ranges, 0.1 µΩ resolution, ±0.5% rdg ± 5 digits, 4½-digit LED display, back-EMF protection; optional RS232 / USB software.
-
Enquire about KM-OHM-8500-10
KM-OHM-8500-10 10 A Digital Micro-Ohm Meter
Bench 4-terminal micro-ohm meter with a regulated 10 A source: 0.1 µΩ – 1999.9 Ω in 7 ranges, test currents 10 A to 0.1 mA, 4½-digit LED display, back-EMF protection.
-
Enquire about KM-OHM-8500-100
KM-OHM-8500-100 Digital Contact Resistance Meter, 100 A
100 A contact resistance (micro-ohm) meter for breakers and bus joints: true 4-terminal method, regulated 100 A DC source, ±(0.5% of rdg + 3 dgts), 3½-digit LED display, test ON / OFF switch.
-
Enquire about KM-OHM-8501
KM-OHM-8501 Digital DC Low Resistance Meter with PC Interface
4-wire DC low resistance meter, 0.001 mΩ – 300.0 kΩ with 1 µΩ resolution, ±0.1% FS ± 20 dgts, ≥ 1 A test current, 500-set memory, USB PC interface, rechargeable; CAT III 600 V.
-
Enquire about KM-OHM-8501E
KM-OHM-8501E Digital DC Low Resistance Meter
4-wire DC low resistance meter, 0.01 mΩ – 30.00 kΩ with 10 µΩ resolution, ±0.1% FS ± 20 dgts, ≥ 1 A test current, 500-set memory, rechargeable; CAT III 600 V.
-
Enquire about KM-OHM-8502
KM-OHM-8502 Handheld DC Resistance Tester, 10 A
Handheld 4-wire DC resistance tester for transformer windings and contacts: 10.0 µΩ – 50.00 kΩ, test current up to 10 A, ±0.2% FS ± 10 dgts, colour touch screen, 500-set memory, USB; CAT III 600 V.
-
Enquire about KM-PDAI
KM-PDAI Partial Discharge Acoustic Imager
Acoustic imager with 128 digital microphones (2 – 55 kHz) that shows partial discharge, arcing and gas leaks on a 7-inch screen, 0.3 – 100 m, PRPD; optional 640 × 512 thermal camera module.
-
Enquire about KM-PFR-9-06
KM-PFR-9-06 Digital Power Factor Regulator, 6 Steps
6-step microprocessor power factor controller, 144 × 144 mm, 220 V or 415 V ±15%, 0.05 – 5 A CT input, red LED PF display, automatic C/K, 10 – 240 s step delay, several switching sequences.
-
Enquire about KM-PFR-S-04
KM-PFR-S-04 Intelligent Power Factor Regulator, 4 Steps
4-step intelligent kVAR-based power factor regulator, 440 V, 50 mA – 5 A CT input, displays PF, voltage and load current, automatic C/K, over / under voltage protection; IP40.
-
Enquire about KM-PFR-S-08
KM-PFR-S-08 Intelligent Power Factor Regulator, 8 Steps
8-step intelligent kVAR-based power factor regulator, 440 V, 50 mA – 5 A CT input, displays PF, voltage and load current, automatic C/K, over / under voltage protection; IP40.
-
Enquire about KM-PM-100
KM-PM-100 Digital Multifunction TRMS Power Meter
96-size TRMS multifunction power meter with four-row backlit LCD for 1φ / 3φ systems, RS-485 Modbus RTU, optional Ethernet, 4 × 4 – 20 mA, 4 alarms and 2 pulse outputs.
-
Enquire about KM-PM-100H
KM-PM-100H Digital Multifunction TRMS Power Meter with Harmonics
96-size TRMS multifunction power meter with four-row backlit LCD for 1φ / 3φ systems, RS-485 Modbus RTU, optional Ethernet, 4 × 4 – 20 mA, 4 alarms and 2 pulse outputs; voltage and current harmonics to the 15th.
-
Enquire about KM-PM-237C
KM-PM-237C Digital Multifunction TRMS Power Meter, 96 × 96
96 × 96 mm TRMS multifunction meter for 3-phase 3- and 4-wire systems: V, A, P, Q, S, PF, energy import / export, THD, demand and unbalance; class 0.5S, RS-485 Modbus, relay and pulse outputs.
-
Enquire about KM-PM-337C
KM-PM-337C Digital Multifunction TRMS Power Meter with Harmonics to 50th, 96 × 96
96 × 96 mm smart power meter for 1- and 3-phase systems: V, A, P, Q, S, PF, 4-quadrant energy, 6 tariffs, harmonics to the 50th with K-factor, demand, unbalance; class 0.5S, RS-485 Modbus to 115200 bps.
-
Enquire about KM-PS-302
KM-PS-302 DC Power Supply, 0 – 30 V / 0 – 2 A
Single-output linear bench power supply, 0 – 30 V / 0 – 2 A, constant voltage and constant current, coarse and fine knobs, LED voltage and current displays, ripple < 1.0 mV rms.
-
Enquire about KM-PS-302D-II
KM-PS-302D-II Dual Output DC Power Supply, 2 × 0 – 30 V / 0 – 2 A
Dual-output linear bench power supply, 2 × 0 – 30 V / 0 – 2 A plus a fixed 5 V / 3 A output; series, parallel or independent by switch; automatic CV / CC; four LED displays.
