Kusam Meco
7 Kusam Meco products listed in this category. For prices and availability, send an enquiry.
Products
-
Enquire about CA 500
CA 500 500 A AC/DC Current Clamp Adaptor
AC / DC clamp adaptor that turns any multimeter into a 500 A clamp meter (1 mV per A into the 2 V or 20 V range), 30 mm jaw, 50 – 400 Hz; also for oscilloscopes; CAT II 600 V.
-
Enquire about CA 1000
CA 1000 AC/DC Current Clamp Adaptor
AC / DC clamp adaptor for multimeters and oscilloscopes: DC 1000 A, AC 1000 A, 57 mm jaw for cables or 70 × 18 mm bus bars, auto zero; CAT II 1000 V.
-
Enquire about CA 2000
CA 2000 AC/DC Current Clamp Adaptor
AC / DC clamp adaptor for multimeters and oscilloscopes: DC 2000 A, AC 1500 A, 57 mm jaw for cables or 70 × 18 mm bus bars, auto zero; CAT II 1000 V.
-
Enquire about CA 3000
CA 3000 Flexible Current Probe (Rogowski Coil)
Rogowski flexible current probe for any multimeter: 18-inch coil around conductors up to 5.8 inches, 30 A / 300 A / 3000 A AC ranges with 100 / 10 / 1 mV per A output and banana plugs; CAT III 1000 V / CAT IV 600 V.
-
Enquire about CA 3000D
CA 3000D Flexible Current Probe (Rogowski Coil) with Display
Rogowski flexible current probe with its own display: 18-inch coil around conductors up to 5.8 inches, 30 A / 300 A / 3000 A AC ranges, true RMS, readings to 3150; CAT III 1000 V / CAT IV 600 V.
-
Enquire about KM-CCT3K
KM-CCT3K 3000 A AC Rogowski Flex Clamp Current Sensor
Rogowski coil flexible current sensor, 18-inch (45.7 cm) loop, ranges 30 A / 300 A / 3000 A AC, 45 – 500 Hz, with BNC adaptor; reads directly on the KM 4000 / KM 4002 clamp meters. CAT IV 600 V.
-
Enquire about PD-28
PD-28 High Voltage Probe
High voltage probe that extends a multimeter to 40 kV DC or 28 kV AC: 1000 MΩ input impedance, 1000:1 attenuation, with needle and CRT-anode tips and ground clip.
