Kusam Meco

26 Kusam Meco products listed in this category. For prices and availability, send an enquiry.

Enquire about Kusam Meco

DM3A 3-Phase AC Current Meter with 3 Displays

4-digit 3-phase AC current panel meter showing all three phases at once, X/5 A, X/1 A or X/10 A, 2CT / 3CT, 3 or 4 alarms, analog output and RS-485 Modbus (38400 baud).

Enquire about DM3A
DM3D 3-Channel DC Voltage / Current Meter with 3 Displays

4-digit 3-channel DC voltage or current panel meter, three values shown at once, programmable range per channel, 3 or 4 alarms, analog output and RS-485 Modbus.

Enquire about DM3D
DM3S 3-Channel Current Loop (4 – 20 mA) Meter with 3 Displays

4-digit 3-channel 4 – 20 mA loop panel meter (2-wire, external 24 V), programmable display per channel, 3 or 4 alarm relays, analog output and RS-485 Modbus.

Enquire about DM3S
DM3V 3-Phase AC Voltage Meter with 3 Displays

4-digit 3-phase AC voltage panel meter showing all three phases at once, 0 – 440 V, 3P3W / 3P4W, programmable PT ratio, 3 or 4 alarms, analog output and RS-485 Modbus.

Enquire about DM3V
DMB Load Cell / Strain Gauge Setting Digital Meter

4½-digit (±19999) load cell and strain gauge meter, 2 / 3 / 5 mV/V input with 8, 10 or 12 V excitation, 0.1% FS + 1 count, tare memory, 2 alarm relays, analog or RS-485 output.

Enquire about DMB
DMCA DC Signal Operation Digital Meter

Two-input DC signal calculator meter: add, subtract, multiply, divide, average or high / low select, 3-line display (input 1, input 2, result), 3 or 4 alarms, analog and RS-485 outputs.

Enquire about DMCA
DMDPW DC Multifunction Power Meter with kWh

Microprocessor DC power meter for telecom tower sites: DC V, A, W and Wh on a 3-line LED display, 10-digit kWh, pulse output, 3 or 4 relays, RS-485 Modbus; DIN-IEC 688.

Enquire about DMDPW
DML Dual Display Flow Digital Meter

Flow meter with dual display: 5-digit flow rate and 7-digit totaliser from a 4 – 20 mA or 0 – 20 mA input, linear or square-root, pulse, analog or RS-485 output, 10-year totaliser memory.

Enquire about DML
DMP Potentiometer / Level / Position Setting Digital Meter

4½ / 5-digit meter for potentiometer, level and position sensors (2-wire 0 – X Ω or 3-wire 200 Ω – 10 kΩ), 0.1% FS + 1 count, 2 alarm relays, analog or RS-485 output.

Enquire about DMP
DMU RPM / Speed / Pulse / Length / Flow Setting Digital Meter

4½-digit pulse meter for RPM, speed, length and flow, open collector, voltage pulse, relay contact or PNP input to 20 kHz, 0.01% FS pulse accuracy, 2 alarm relays, analog or RS-485 output.

Enquire about DMU
MMA AC Current Digital Panel Meter, 5 Digit, R.M.S.

5-digit (99999 count) R.M.S. AC current panel meter, X/5 A, X/1 A or 0 – 10 A, programmable CT ratio, up to 4 alarms, analog output and RS-485 Modbus; 1/8 DIN, < 90 mm deep.

Enquire about MMA
MMAR AC Current Digital Panel Meter, 5 Digit, True RMS

5-digit (99999 count) True RMS AC current panel meter, X/5 A, X/1 A or 0 – 10 A, programmable CT ratio, up to 4 alarms, analog output and RS-485 Modbus; 1/8 DIN, < 90 mm deep.

Enquire about MMAR
MMD DC Voltage / Current Setting Digital Panel Meter

5-digit microprocessor DC voltmeter / ammeter (to 600 V, 10 A or shunt), 0.1% FS + 2 counts, programmable display, up to 4 alarms, analog output and RS-485 Modbus; 1/8 DIN.

Enquire about MMD
MMF Frequency Digital Panel Meter

Frequency panel meter to 400 Hz, input 30 – 600 V, 50 / 60 Hz centre with ±1 to ±10 Hz span, ±0.5% RD, optional 2 alarms, 4 – 20 mA and RS-485 Modbus; 96 × 48 mm.

Enquire about MMF
MMG Modbus-RTU Digital Panel Meter

Modbus display: reads (master) or shows (slave) a register from Modbus RTU instruments over RS-485, RS-232, RS-422 or Ethernet, 5-digit LED, up to 4 alarms and an analog output.

Enquire about MMG
MMPF Power Factor Digital Panel Meter

Power factor panel meter, −0.1 – 1 – +0.1 cos θ, for 1φ / 3φ systems, ±0.5% RD, 0.56" red LED, optional 2 alarms, 4 – 20 mA and RS-485 Modbus; 96 × 48 mm.

Enquire about MMPF
MMQ VAr (Reactive Power) Digital Panel Meter

Bi-directional VAr panel meter for 1φ / 3φ systems, 5-digit red LED (−32768 – 32767), ±0.5% RD, optional pulse, 4 – 20 mA and RS-485 Modbus; 96 × 48 mm.

Enquire about MMQ
MMQH VArhour Digital Panel Meter

Bi-directional varhour panel meter for 1φ / 3φ systems, 8-digit red LED (±99999999), ±0.5% RD, dual pulse outputs (+QH / −QH) and RS-485 Modbus; 96 × 48 mm.

Enquire about MMQH
MMR RTD Temperature Digital Panel Meter

5-digit RTD temperature panel meter, PT100 / CU10 / PT500 / NI1000 input (−100 – 400 °C), 3-wire, °C / °F, up to 4 alarms, analog output and RS-485 Modbus; 1/8 DIN.

Enquire about MMR
MMS DC Process Signal Digital Panel Meter

5-digit process indicator for 0 – 5 V, 1 – 5 V, 0 – 10 V, 0 – 20 mA or 4 – 20 mA (2-wire loop with 24 V), 0.05% FS + 2 counts, up to 4 alarms, analog output and RS-485 Modbus.

Enquire about MMS
MMT Thermocouple Temperature Digital Panel Meter

5-digit thermocouple temperature panel meter, K / E / J / T / R / S input, °C / °F, max. reading, break detection, up to 4 alarms, analog output and RS-485 Modbus; 1/8 DIN.

Enquire about MMT
MMV AC Voltage Digital Panel Meter, 5 Digit, R.M.S.

5-digit R.M.S. AC voltage panel meter, 0 – 440 V AC, programmable PT ratio, up to 4 alarms, analog output and RS-485 Modbus; 1/8 DIN.

Enquire about MMV
MMVR AC Voltage Digital Panel Meter, 5 Digit, True RMS

5-digit True RMS AC voltage panel meter, 0 – 440 V AC, programmable PT ratio, up to 4 alarms, analog output and RS-485 Modbus; 1/8 DIN.

Enquire about MMVR
MMW Watt Digital Panel Meter

Bi-directional watt panel meter for 1φ / 3φ systems, 5-digit red LED (−32768 – 32767), ±0.5% rdg, optional 2 alarms, 4 – 20 mA and RS-485 Modbus; 96 × 48 mm.

Enquire about MMW

Show more products

Products