Kusam Meco
478 Kusam Meco products listed. For prices and availability, send an enquiry.
Products
-
Enquire about KM 1680C
KM 1680C Explosion-Proof Online Loop Ground Resistance Detector
Explosion-proof (Ex ia IIB T3 Ga) online ground resistance detector with closed-loop CT, 0.01 Ω to 200 Ω, for permanent monitoring of loop grounding circuits over a wired or wireless network.
-
Enquire about KM 1690
KM 1690 Explosion-Proof Clamp Ground Resistance Tester
Explosion-proof clamp-on ground resistance tester, 0.001 Ω to 1200 Ω, 55 × 32 mm jaw, 300 sets of memory. Measures without disconnecting the earth or using auxiliary electrodes.
-
Enquire about KM 1720
KM 1720 Clamp-On Earth Resistance and Leakage Current Tester
Clamp-on earth resistance tester (0.001 – 1500 Ω) and leakage current meter (to 35 A) that needs no auxiliary rods, with dual backlit display, high / low alarms and 500-group memory; 32 mm jaw, IP40, CAT IV 300 V.
-
Enquire about KM 1720+
KM 1720+ Clamp-On Earth Resistance and Leakage Current Tester with PC Interface
Clamp-on earth resistance tester (0.010 – 1200 Ω) and leakage current meter (to 20 A) that needs no auxiliary rods, with high / low alarms and PC software by USB cable; 32 mm jaw.
-
Enquire about KM 1780KC
KM 1780KC Explosion-Proof Online Split-Core Ground Resistance Detector
Explosion-proof (Ex ia IIB T3 Ga) online ground resistance detector with split-core CT, 0.01 Ω to 100 Ω, fitted without breaking the circuit, for wired or wireless monitoring networks.
-
Enquire about KM 1790
KM 1790 Multifunction Clamp Ground Resistance Tester with Leakage Current
Clamp-on ground resistance tester (0.01 – 1200 Ω) with leakage current to 20 A shown on the same screen, quick self-test with 5.1 Ω coil, fast filtering and 300-set memory; 32 mm jaw, CAT III 300 V / CAT IV 150 V.
-
Enquire about KM 1812EL-A
KM 1812EL-A Digital ELCB Tester, 240 V AC
Microprocessor ELCB tester for 240 V AC (L-E) circuits: trip current settings from 3 mA to 500 mA, digital trip time to 1 ms, 0° / 180° phase start, L-E voltmeter, polarity indication.
-
Enquire about KM 1812EL-B
KM 1812EL-B Digital ELCB Tester, 230 V AC
Microprocessor ELCB tester for 230 V AC (L-E) circuits: trip current settings from 3 mA to 500 mA, digital trip time to 1 ms, 0° / 180° phase start, L-E voltmeter, polarity indication.
-
Enquire about KM 1812EL-C
KM 1812EL-C Digital ELCB Tester, 220 V AC
Microprocessor ELCB tester for 220 V AC (L-E) circuits: trip current settings from 3 mA to 500 mA, digital trip time to 1 ms, 0° / 180° phase start, L-E voltmeter, polarity indication.
-
Enquire about KM 1812EL-D
KM 1812EL-D Digital ELCB Tester, 110 V AC
Microprocessor ELCB tester for 110 V AC (L-E) circuits: trip current settings from 3 mA to 500 mA, digital trip time to 1 ms, 0° / 180° phase start, L-E voltmeter, polarity indication.
-
Enquire about KM 1820EX
KM 1820EX Flameproof Clamp Earth Resistance Tester
Flameproof (Ex ia IIB T3 Ga) clamp earth resistance tester for flammable and explosive areas: 0.010 Ω to 1200 Ω, ±(1% + 0.01 Ω), alarm threshold, 99-reading memory.
-
Enquire about KM 1920
KM 1920 Ground Pile Clamp Ground Resistance Tester
Clamp ground (loop) resistance tester with 2.4-inch colour screen: clamp resistance to 1500 Ω, 3 / 4-wire method to 3000 Ω, leakage current to 40 A, ground voltage, 68 mm jaw, alarm, USB upload and rechargeable battery.
-
Enquire about KM 2001
KM 2001 Digital Signal Generator, 0.2 Hz to 2 MHz
Sine and square wave signal generator, 0.2 Hz – 2 MHz in 6 ranges with digital frequency display, 600 Ω output, attenuator in 20 dB steps to 60 dB; mains powered.
-
Enquire about KM 2002
KM 2002 Digital Function Generator, 2 MHz
Function generator to 2 MHz: sine, square, rectangle, sawtooth, triangle and pulse, duty cycle 20 – 80%, 5-digit frequency and 3-digit amplitude LED displays, 50 Ω output.
-
Enquire about KM 2005
KM 2005 Digital Function Generator, 5 MHz
Function generator, 0.1 Hz – 5 MHz: sine, triangle, square, ±pulse and sawtooth, 20 Vp-p into no load, TTL / CMOS output, VCF input and built-in 1 Hz – 20 MHz frequency counter.
-
Enquire about KM 2006
KM 2006 AC/DC True RMS Leakage Clamp Meter
True RMS AC / DC leakage clamp meter with 0.1 mA resolution: AC to 20 A, DC to 10 A, 23 mm jaw, plus voltage, resistance, MAX / MIN and zero; CAT IV 300 V.
-
Enquire about KM 2008
KM 2008 Leakage Current Clamp Meter with Data Logging
Leakage current clamp meter, 0.01 mA to 300 A AC in four ranges, 40 mm jaw, 99-reading memory with RS232 PC software, peak hold; CAT III 600 V.
-
Enquire about KM 2008A
KM 2008A Leakage Current Clamp Meter
Leakage current clamp meter, 30 mA to 300 A AC ranges with 40 mm jaw, 60-reading memory, peak hold and data hold; runs on button cells; CAT III 600 V.
-
Enquire about KM 2030
KM 2030 Digital Earth Resistance Tester (3 Terminal)
3-terminal digital earth tester: 20 / 200 / 2000 Ω ranges with 0.01 Ω resolution, earth voltage to 30 V, data hold and working LED; runs on AA cells plus a 12 V battery.
-
Enquire about KM 2040
KM 2040 Digital 4-Terminal Earth Resistance and Soil Resistivity Tester
4-pole earth resistance and soil resistivity tester with FFT noise filtering, ranges from 2 Ω (0.05 Ω) to 20 kΩ, interference voltage and frequency display, lead compensation and 1000-group memory; CAT IV 150 V / CAT III 300 V.
-
Enquire about KM 2100
KM 2100 Multifunction Power and Harmonics Analyser, Class S, with Flicker, Transients and Inrush
Portable Class S power quality analyser to IEC 61000-4-30 and EN 50160: 1000 V, 5000 A with clamps, harmonics and interharmonics, flicker, transients, inrush, dips and swells, unbalance, energy; 8 GB logging, LAN.
-
Enquire about KM 2102CEX+
KM 2102CEX+ 100 MHz Digital Storage Oscilloscope
2-channel 100 MHz digital storage oscilloscope, 1 GSa/s, 64 kpts, ≥ 5,000 wfms/s, 7-inch 800 × 480 TFT, 34 automatic measurements, frequency counter, USB OTG.
-
Enquire about KM 2200
KM 2200 Multifunction Power and Harmonics Analyser, Class S
Portable Class S power quality analyser to IEC 61000-4-30 and EN 50160: volts, amps, hertz, power, harmonics to the 50th, dips, swells and interruptions, scope and logger; 8 GB logging, LAN.
-
Enquire about KM 2234BL
KM 2234BL Non-Contact Laser Digital Tachometer
Non-contact laser tachometer, 2.5 – 99,999 RPM, frequency 0.05 – 1666 Hz and count to 99,999, ±(0.05% + 1 digit), 50 – 500 mm working distance, 5-digit backlit LCD, 96-set memory.
