54, Ezra Street , Kolkata - 700001 , West Bengal, IndiaMonday to Saturday, 10:30 am to 6:30 pm

Industrial Supply Syndicate Kolkata, since 1977 Send an enquiry
Metrel MI 3132 EV Tester for Electric Vehicles

Metrel MI 3132 EV Tester for Electric Vehicles

Brand
Metrel
Model number
MI 3132

Electric vehicle safety tester: insulation per UN ECE R100 and ISO 6469-3 in Ω/V using the vehicle battery, 2 A µΩ meter for equipotential bonding, continuity, insulation to 2.99 GΩ, AC / DC voltage; Li-ion, touch screen.

Price and availability on request

Request a quote

Sent with the product details: Metrel MI 3132 EV Tester for Electric Vehicles.

A phone number or an email address is needed, so we can reply.

We use these details only to reply to your enquiry. See our privacy notice.

Key features

  • Insulation measurements according to UN ECE R100 and ISO 6469-3 with own REESS as DC voltage source
  • Insulation resistance with DC voltage from 50 V to 1500 V
  • DC voltage measurement
  • TRMS voltage and frequency measurements
  • Four wire Micro Ohm measurements with 2 A DC test current
  • Low Ohm measurements with 7 mA and 200 mA DC test current
  • Visual safety and functional inspections
  • Insulation resistance measuring according to UN ECE R100 measuring using internal DC source
  • Performing accurate four wire measurements with Kelvin clamps and up to 2 A measuring current
  • Settable duration and current direction (unidirectional or bidirectional) in the Micro Ohm measurement
  • Insulation range: wide range of insulation test voltages from 50 V to 1500 V, resistance measuring range up to 3 GΩ
  • Overvoltage category 1000 V CAT III
  • 4.3’’ colour LCD display with touch screen
  • Programmable AUTO SEQUENCEs
  • High degree of protection for outdoor use and rough environment
  • DC resistance measurements
  • Support for single or automated measurements
  • Built-in charger and rechargeable Li-Ion batteries as standard accessory
  • BT communication with PC, via built-in BT module
  • PC SW Metrel ES Manager for measurement pre and post processing: preparation of the test structure, result download, tree-view, table view and graphical view, storing and printing

Specifications

µΩ meter
1 A, 2 A0.000 mΩ ... 499 mΩ; ±⁠(0.5 % of reading + 2 digit) from 2.00 mΩ
100, 200 mA / 10 mA0.0 mΩ ... 1999 Ω
Continuity
Continuity0.0 Ω ... 199.9 kΩ; ±⁠(3 % of reading + 2 digit) up to 199.9 Ω
Insulation
Riso0.000 MΩ ... 2.99 GΩ; ±⁠(3 % of reading + 5 digit) up to 1.999 MΩ at Uiso ≥ 250 V
EV R100 insulation (UN ECE R100)0 ... 49.9 kΩ/V; ±⁠(3 % of reading + 2 digits) up to 999 Ω/V
Voltage
AC / DC voltage0.000 V ... 749.9 V AC / 0.000 V ... 999.9 V DC; ±⁠(0.5 % of reading + 3 digits)
Frequency15.00 Hz ... 1.200 kHz
General
Overvoltage category1000 V CAT III
Display4.3" colour LCD display with touch screen
Power supplyBuilt-in charger and rechargeable Li-Ion battery
Dimensions (w x h x l) / mass252 x 111 x 165 mm / 1.78 kg
Supplied with
MI 3132 Standard setInstrument MI 3132 EV Tester; Carrying bag (L) (A 1551); Set of carrying straps (A 1707); A 1782 4-wire test lead, 2 x 2 m, 2 x 5 m; A 1781 3-wire test lead, 3 x 1.5 m; A 1780 2-wire test lead, 2 x 1.5 m; Test probe, black (A 1014); Test probe, red (A 1016); Test probe, brown (A 1298); Test probe, grey (A 1453); Crocodile clip, black, 2 pcs (A 1013); Crocodile clip, red , 2 pcs (A 1064); Crocodile clip, green (A 1309); USB cable (A 1727); 4400mAh battery pack (A 1567); Power supply adapter 12 V,

Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.

Related products