Test & Measuring Instruments
Portable and bench instruments for electricians, maintenance teams, test labs and quality departments: from multimeters and clamp meters to insulation, earth, power quality and environmental testers.
All products in Test & Measuring Instruments
-
Enquire about Fluke 568 Ex
Fluke 568 Ex Intrinsically Safe Infrared Thermometer
Intrinsically safe infrared and contact thermometer for Class I Div 1/2 or Zone 1/2 areas, -40 °C to 800 °C.
-
Enquire about CIE CIE/666 10000V 10000MΩ
CIE CIE/666 10000V 10000MΩ Insulation Tester 10000 V, 10,000 MΩ, Hand Driven, Wooden Body
CIE/666 hand-cranked insulation tester (megger) testing at 10000 V, scaled 0 to 10000 MΩ, in a wooden body. Runs without mains power or batteries, for site and field testing.
-
Enquire about Hioki LR8515
Hioki LR8515 Wireless Voltage/Temp Logger
Two-channel isolated Bluetooth wireless logger for voltage (±50 mV to ±50 V) and K or T thermocouple temperature, including small signals from pyranometers and heat flow sensors.
-
Enquire about Meco HIT 1K - 5
Meco HIT 1K - 5 Analog Insulation Tester, Hand Cranking Type, 1000 V / 500 MΩ
Hand-cranked analog insulation tester (megger), 1000 V test voltage, 0 – 500MΩ range, ±1% FS, guard terminal; no batteries needed.
-
Enquire about Kyoritsu KEW 8133
Kyoritsu KEW 8133 Flexible Clamp Sensor 3000A, 170mm
Flexible, lightweight air-core clamp sensor of 170 mm diameter for AC currents up to 3000 A. Rated CAT IV 300 V / CAT III 600 V.
-
Enquire about Kusam Meco KM-CVD-11KV
Kusam Meco KM-CVD-11KV Contact High Voltage Detector, 11 kV
Telescopic contact high voltage detector for 11 kV lines and equipment: sound and light alarm, full self check, insulated rubber handle, trigger voltage 1.5 – 4.0 kV.
-
Enquire about HTC Instruments LX-103
HTC Instruments LX-103 Digital Lux Meter with Light Source Setting
Digital lux meter, 1000 / 10000 / 200000 lux ranges with auto / manual range, bar graph, user-defined light source coefficient, min / max / relative.
-
Enquire about Lutron DL-9602SD
Lutron DL-9602SD SD Card Data Logger for RS232 Meters
Data logger that records readings from Lutron RS232 meters to an SD card in real time, with sampling from 2 seconds to almost 9 hours.
-
Enquire about Rishabh ED4311 Mod MID
Rishabh ED4311 Mod MID MID Certified 3 Phase Direct Connected Energy Meter, 100 A direct, Modbus
MID certified (Module B and D) 3 phase direct connected DIN-rail energy meter, 4 module, 100 A direct: class B (EN 50470-3) bidirectional energy, with RS485 Modbus + 2 tariff inputs + 2 SO pulse outputs.
-
Enquire about Fluke 572-2
Fluke 572-2 High-Temperature Infrared Thermometer
High-temperature infrared thermometer to 900 °C with 60:1 distance-to-spot and dual laser sighting.
-
Enquire about CIE CIE/666 10000V 20000MΩ
CIE CIE/666 10000V 20000MΩ Insulation Tester 10000 V, 20,000 MΩ, Hand Driven, Wooden Body
CIE/666 hand-cranked insulation tester (megger) testing at 10000 V, scaled 0 to 20000 MΩ, in a wooden body. Runs without mains power or batteries, for site and field testing.
-
Enquire about Hioki MR6000
Hioki MR6000 Memory HiCorder
High-speed Memory HiCorder with 200 MS/s isolated inputs, up to 32 analog or 128 logic channels, 1 G-word memory and built-in storage; main unit, takes up to 8 input units.
-
Enquire about Meco HIT 2K5 - 50
Meco HIT 2K5 - 50 Analog Insulation Tester, Hand Cranking Type, 2500 V / 5000 MΩ
Hand-cranked analog insulation tester (megger), 2500 V test voltage, 0 – 5000MΩ range, ±1% FS, guard terminal; no batteries needed.
-
Enquire about Kyoritsu KEW 8146
Kyoritsu KEW 8146 Leakage and Load Current Clamp Sensor, 24mm
Leakage and load current clamp sensor with a 24 mm jaw for the KEW 5010, 5020 and 6315. Not for power measurement.
-
Enquire about Kusam Meco KM-CVD-33KV
Kusam Meco KM-CVD-33KV Contact High Voltage Detector, 33 kV
Telescopic contact high voltage detector for 33 kV lines and equipment: sound and light alarm, full self check, insulated rubber handle, trigger voltage 5.25 – 14 kV.
-
Enquire about HTC Instruments LX-104
HTC Instruments LX-104 Data Logging Lux Meter
Data logging lux meter, 400 to 400,000 lux in four ranges, CIE photopic response, peak hold for 10 µs light pulses, 99-value memory, 16,000-record logger and USB.
-
Enquire about Lutron DM-9131
Lutron DM-9131 Automotive Multimeter Tester
Automotive multimeter with 6000 counts, voltage, current, resistance, capacitance and frequency, max/min, relative and data hold; CAT III 1000 V.
-
Enquire about Rishabh EM 1320
Rishabh EM 1320 Energy Meter with Backlit LCD
Rish EM 1320 panel energy meter for 3 phase or 1 phase networks; LCD shows import / export kWh and kVAh energy on display. True RMS, optional RS485 and pulse / limit relays.
-
Enquire about Fluke 705
Fluke 705 Loop Calibrator
Cost-effective mA loop calibrator: source, simulate and measure mA with simultaneous mA and % readout.
-
Enquire about CIE CIE/666/MR-1
CIE CIE/666/MR-1 Insulation Tester 1000 / 500 / 250 V, Multi Range, Hand Driven, Wooden Body
CIE/666 MR-1 hand-cranked multi-range insulation tester: 1000 V (0-2000 MΩ), 500 V (0-1000 MΩ), 250 V (0-500 MΩ) and a 0-20 KΩ continuity range, in a wooden body.
-
Enquire about Hioki MR6000-01
Hioki MR6000-01 Memory HiCorder with Real-time Calculation
High-speed Memory HiCorder with 200 MS/s isolated inputs, up to 32 analog or 128 logic channels, 1 G-word memory and built-in storage; main unit, takes up to 8 input units. This order code adds real-time waveform calculation and digital filter calculation.
-
Enquire about Meco HIT 5 - 1
Meco HIT 5 - 1 Analog Insulation Tester, Hand Cranking Type, 500 V / 100 MΩ
Hand-cranked analog insulation tester (megger), 500 V test voltage, 0 – 100MΩ range, ±1% FS, guard terminal; no batteries needed.
-
Enquire about Kyoritsu KEW 8147
Kyoritsu KEW 8147 Leakage and Load Current Clamp Sensor, 40mm
Leakage and load current clamp sensor with a 40 mm jaw for the KEW 5010, 5020 and 6315. Not for power measurement.
-
Enquire about Kusam Meco KM-CVD-66KV
Kusam Meco KM-CVD-66KV Contact High Voltage Detector, 66 kV
Telescopic contact high voltage detector for 66 kV lines and equipment: sound and light alarm, full self check, insulated rubber handle, trigger voltage 9.9 – 26 kV.
