Lutron DM-9131 Automotive Multimeter Tester

Automotive multimeter with 6000 counts, voltage, current, resistance, capacitance and frequency, max/min, relative and data hold; CAT III 1000 V.

Price and availability on request

Meet IEC 1010 CAT III 1000 V safety requirement.
LCD with green light backlight, easy reading.
6000 counts A/D, high resolution.
Multi function measurement. DCV, ACV, DCA, ACA, Resistance, Capacitance, Inductance, Frequency, Temperature, Diode, Continuity beeper, TACH, DWELL, POINT, 2000A Clamp
Max. & Min. measurement value with recall.
Relative, Data hold.
Auto range with manual range selection.
Temperature measurement possibility.
V/A/Hz button, when execute the ACV, ACA function also can measure the frequency of signal.
Both 10 A, 6A current are build fuse for safety consideration.
10 M ohm impedance for voltage circuit.
Operates from 9 V (006P, MIN1604) batteries.
Built-in overload protection for most ranges.
Photo couple RS 232 computer serial interface.
Uses durable, long-lasting components, enclosed in strong, light weight ABS-plastic housing.
Full line optional adapters: Clamp adapter, Pressure adapter, Sound level adapter, Anemometer adapter, Light adapte, EMF adapter.

Specifications
Display	60 mm x 39 mm large LCD display
Zero adjust	Automatic.
Operating Temp.	0 °C to 50°C (32 °F to 122°F ).
Operating Humidity	Max. 80% RH.
Power Supply	9 V ( 006P, MIN1604 ); DC 9V adapter input; *AC/DC Power adapter is optional.
Dimension	190 x 88 x 40 mm ( 7.5 x 3.5 x 1.6 inch ).
Weight	378 g/0.83 LB ( w/o battery ).
Measurement	DCV, ACV, DCA, ACA, Resistance,Diode, Continuity beeper, Capacitance, Inductance, Frequency, Temperature.
A/D counts no.	6000 counts.
Range selection	Auto range with manual range selecting.
Special function	Relative measurement
Data hold	To freeze the display reading on the LCD display.
Power On/Off management	Auto power off or manual power off.
Memory recall	Records Maximum & Minimum readings with recall.
Relative measurement	To offset the measurement value.
V/A/Hz button	When execute the voltage or current function also can measure the frequency of signal.
Data output	RS 232 PC serial interface, photo couple.
Polarity	Automatic Switching, " - " indicates negative polarity.
Sampling time of display	Approx. 0.5 to 1 second.
Power consumption	Approx. DC 7.0 mA.

Accessories
Optional	Full line adapters : accessories ACA/DCA current adapter; Pressure adapter; Light adapter, EMF adapter; Sound level adapter; High voltage probe.; Holster : HS-03; Type K Temperature probe : TP-11; Soft carrying case: CA-05A; AC to DC 9V adapter: AP-9VA; USB cable: USB-11; Data Acquisition software: SW-801-WIN; SW-E802; RPM inductive pick up sensor: IP-09

Measurement Range
DC Voltage	600.0 mV, 6 V, 60 V, 600 V, 1000 V
AC Voltage	600.0 mV, 6 V, 60 V, 600 V, 1000 V (True RMS)
DC Current	6 A, 10 A
AC Current	6 A, 10 A (True RMS)
Resistance	600 Ω, 6 KΩ, 60 KΩ, 600 KΩ, 6 MΩ, 60 MΩ
Capacitance	600 pF, 6 nF, 60 nF, 600 nF, 6 µF, 60 µF, 100 µF, 600 µF
Inductance	600 µH, 6 mH, 60 mH, 600 mH, 6 H, 60 H, 100 H
Frequency	600 Hz, 6 KHz, 60 KHz, 600 KHz, 6 MHz, 20 MHz
Temperature	-100.0 to 1000 °C, -148.0 to 1832 °F
Diode Test	Forward voltage, VF range 2.9 V DC
Continuity Beeper	Beeps if measured resistance is less than 20 Ω
TACH (RPM)	500 to 30000 RPM
DWELL	0 to 120° (various cylinder configurations)
Duty Cycle	0 to 100%

Technical details
Input Impedance	10 MΩ for voltage circuit
Overload Protection	Built-in fuse for 10A and 6A current ranges

Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.