Test & Measuring Instruments
Portable and bench instruments for electricians, maintenance teams, test labs and quality departments: from multimeters and clamp meters to insulation, earth, power quality and environmental testers.
All products in Test & Measuring Instruments
-
Enquire about Meco EM-09
Meco EM-09 1-Phase Multifunction Appliance Meter, TRMS
Portable plug-and-play TRMS single-phase appliance meter for 1 A, 5 A or 20 A: V, A, PF, Hz, kW, kVA, kVAr and energy on a backlit LCD; RS485 optional.
-
Enquire about Kyoritsu KEW 8127
Kyoritsu KEW 8127 Load Current Clamp Sensor, 24mm
Load current clamp sensor with a 24 mm jaw for the KEW 6305 and 6315, also usable with the KEW 5010 and 5020 (marked * by Kyoritsu).
-
Enquire about Kusam Meco KM-CCT3K
Kusam Meco KM-CCT3K 3000 A AC Rogowski Flex Clamp Current Sensor
Rogowski coil flexible current sensor, 18-inch (45.7 cm) loop, ranges 30 A / 300 A / 3000 A AC, 45 – 500 Hz, with BNC adaptor; reads directly on the KM 4000 / KM 4002 clamp meters. CAT IV 600 V.
-
Enquire about HTC Instruments LX-10A
HTC Instruments LX-10A Mini Lux Meter
Pocket lux meter with lux / foot-candle ranges up to 200,000 lux, 320 – 730 nm, for fluorescent, metal halide, sodium and incandescent light, plus temperature and humidity.
-
Enquire about Lutron CWF-3300
Lutron CWF-3300 Flexible AC Power Clamp Meter, 3000 A
Power clamp meter with a flexible Rogowski coil for true RMS AC current to 3000 A and voltage to 600 V, measuring kW, kVA, kVAR and power factor; CAT IV 600 V.
-
Enquire about Rishabh ED4311 MB
Rishabh ED4311 MB 3 Phase Direct Connected Energy Meter, 100 A direct, M-Bus
3 phase direct connected DIN-rail energy meter, 4 module, 100 A direct: class B (EN 50470-3) bidirectional energy, with M-Bus + 2 tariff inputs + 2 SO pulse outputs.
-
Enquire about Fluke 566
Fluke 566 Infrared and Contact Thermometer
Two-in-one infrared and contact thermometer, 30:1 spot, -40 °C to 650 °C, adjustable emissivity, logging and alarms.
-
Enquire about CIE CIE/666 10000V 50-50000MΩ
CIE CIE/666 10000V 50-50000MΩ Insulation Tester 10000 V, 50-50,000 MΩ, Hand Driven, Wooden Body
CIE/666 hand-cranked insulation tester (megger) testing at 10000 V, scaled 50 to 50000 MΩ, in a wooden body. Runs without mains power or batteries, for site and field testing.
-
Enquire about Hioki LR8513
Hioki LR8513 Wireless Clamp Logger
Two-channel Bluetooth wireless logger for AC/DC load current and AC leakage current with Hioki current sensors; fits inside a closed distribution panel. Sensors sold separately.
-
Enquire about Meco FCT Series
Meco FCT Series Flexible Current Probe (Rogowski)
Flexible Rogowski current probe for single- and three-phase AC and pulsed DC current up to 1 MHz; opens around large conductors without breaking the circuit.
-
Enquire about Kyoritsu KEW 8128
Kyoritsu KEW 8128 Load Current Clamp Sensor, 24mm
Load current clamp sensor with a 24 mm jaw for the KEW 6305 and 6315, also usable with the KEW 5010 and 5020 (marked * by Kyoritsu).
-
Enquire about Kusam Meco KM-CFPL-620
Kusam Meco KM-CFPL-620 Cable Fault Pre-Locator (TDR) for Telecom and Signal Cables
TDR cable fault pre-locator for underground telecom and signal cables: open, short, earth, cross and poor-contact faults up to 8 km, ±1% × cable length, colour LCD, USB, with insulation and loop resistance tests.
-
Enquire about HTC Instruments LX-101A
HTC Instruments LX-101A Digital Lux Meter, 200,000 Lux
Digital lux meter with separate sensor, 0 – 200,000 lux, 0.1 lux resolution, 3½ digits, data hold.
-
Enquire about Lutron DI-6400
Lutron DI-6400 Digital Insulation Tester, 100 V to 1000 V
Insulation tester with auto range up to 4000 MΩ at 100, 250, 500 and 1000 V, auto discharge, AC/DC voltage and low ohm ranges with continuity beeper.
-
Enquire about Rishabh ED4311 MB MID
Rishabh ED4311 MB MID MID Certified 3 Phase Direct Connected Energy Meter, 100 A direct, M-Bus
MID certified (Module B and D) 3 phase direct connected DIN-rail energy meter, 4 module, 100 A direct: class B (EN 50470-3) bidirectional energy, with M-Bus + 2 tariff inputs + 2 SO pulse outputs.
-
Enquire about Fluke 568
Fluke 568 Infrared and Contact Thermometer
Two-in-one infrared and contact thermometer, -40 °C to 800 °C, graphical display and menus, USB and software.
-
Enquire about CIE CIE/666 10000V 100-100000MΩ
CIE CIE/666 10000V 100-100000MΩ Insulation Tester 10000 V, 100-1,00,000 MΩ, Hand Driven, Wooden Body
CIE/666 hand-cranked insulation tester (megger) testing at 10000 V, scaled 100 to 100000 MΩ, in a wooden body. Runs without mains power or batteries, for site and field testing.
-
Enquire about Hioki LR8514
Hioki LR8514 Wireless Humidity Logger
Wireless temperature and humidity logger for two locations: -40°C to 80°C and 0 to 100% RH with a ±3% RH sensor, Bluetooth data download. Sensors sold separately.
-
Enquire about Meco HIT 1K - 2
Meco HIT 1K - 2 Analog Insulation Tester, Hand Cranking Type, 1000 V / 200 MΩ
Hand-cranked analog insulation tester (megger), 1000 V test voltage, 0 – 200MΩ range, ±1% FS, guard terminal; no batteries needed.
-
Enquire about Kyoritsu KEW 8130
Kyoritsu KEW 8130 Flexible Clamp Sensor 1000A, 110mm
Flexible, lightweight air-core clamp sensor of 110 mm diameter for AC currents up to 1000 A. Rated CAT IV 300 V / CAT III 600 V.
-
Enquire about Kusam Meco KM-CO-910
Kusam Meco KM-CO-910 Mini Carbon Monoxide Detector
Pocket carbon monoxide meter, 0 – 1000 ppm, 1 ppm resolution, 5% ± 10 ppm, electrochemical sensor (about 5 years), beeper rising from 35 ppm and continuous above 200 ppm.
-
Enquire about HTC Instruments LX-102A
HTC Instruments LX-102A Digital Lux Meter, 200,000 Lux
Digital lux meter with separate sensor, 0 – 200,000 lux, 0 – 20,000 FC, 0.1 lux resolution, 3½ digits, data hold, peak hold.
-
Enquire about Lutron DL-6054
Lutron DL-6054 AC Leakage Current Clamp Tester
Miniature clamp tester for AC leakage current with 200 mA, 20 A and 200 A ranges, 0.1 mA resolution and a 19 mm jaw, with data hold.
-
Enquire about Rishabh ED4311 Mod
Rishabh ED4311 Mod 3 Phase Direct Connected Energy Meter, 100 A direct, Modbus
3 phase direct connected DIN-rail energy meter, 4 module, 100 A direct: class B (EN 50470-3) bidirectional energy, with RS485 Modbus + 2 tariff inputs + 2 SO pulse outputs.
