Test & Measuring Instruments
Portable and bench instruments for electricians, maintenance teams, test labs and quality departments: from multimeters and clamp meters to insulation, earth, power quality and environmental testers.
All products in Test & Measuring Instruments
-
Enquire about SEW 2820 EL
SEW 2820 EL Digital ELCB (RCD) Tester
Heavy-duty microprocessor ELCB tester for 100 V to 450 V L-E systems: measures trip current (ramp up to 999 mA) and trip time to 99.999 s, with 0° / 180° phase selection and over-temperature shutdown.
-
Enquire about Masibus VSW-160
Masibus VSW-160 Flame Proof Vibration Switch
Masibus VSW-160 flame proof vibration switch. For protection of fans, pumps, motors, blowers etc, ideal for CTID fan monitoring.
-
Enquire about Megger TC3231
Megger TC3231 Thermal Camera
Pocket thermal camera with a 32 x 31 pixel infrared sensor, -20 °C to 300 °C range, visible-image blending, hot and cold spot tracking and micro SD storage for 6000 images; rechargeable Li-ion.
-
Enquire about Motwane MIRT-61
Motwane MIRT-61 1 kV Digital Multimeter Insulation Tester
Two instruments in one: a 1 kV insulation tester (50 V to 1000 V, up to 6 GΩ, 1 mA test current) and a true RMS industrial multimeter (AC/DC 1000 V, current, resistance, capacitance, frequency). Amber-backlit dual LCD.
-
Enquire about Kusam Meco 278HP-800KV
Kusam Meco 278HP-800KV High Voltage Proximity Detector with 360° LEDs, up to 800 kV
Non-contact high voltage proximity detector with 10 voltage settings from 240 V to 800 kV, three LEDs in a ring for 360° viewing under a sun shade, sound indication; supplied with disconnect hook and fuse extractor head; IP66.
-
Enquire about HTC Instruments 7250-IN
HTC Instruments 7250-IN 5 kV Digital Insulation Tester with PI and DAR
Digital insulation tester, 500 V to 5000 V, up to 1000 GΩ, with polarization index (PI), dielectric absorption ratio (DAR), data logging and USB. 9,999 counts with bar graph.
-
Enquire about Lutron AM-4206
Lutron AM-4206 Vane Anemometer with Air Flow (CMM/CFM) and Temperature
Vane anemometer that reads air velocity, air flow in CMM and CFM with instant, 2/3 Vmax and average modes, and air temperature, with RS232 output.
-
Enquire about Rishabh 6013
Rishabh 6013 True RMS Digital Multimeter, 60000 Count
TRMS 60,000-count multimeter: 1000 V, current 6 A / 16 A, 60 mV / 600 mV mV ranges, 10 kHz bandwidth, MIN/MAX/AVG and GO/NO-GO.
-
Enquire about Fluke 17B MAX KIT
Fluke 17B MAX KIT Digital Multimeter Kit with TL75 and TL31 Test Leads
17B MAX multimeter kit with TL75 and TL31 test leads and a type K thermocouple; frequency and temperature, CAT III 600 V.
-
Enquire about CIE CIE/222M 3T 0-1/10/100/1000/10000
CIE CIE/222M 3T 0-1/10/100/1000/10000 Earth Tester 0-1-10-100-1,000-10,000 Ω, Five Range, 3 Terminal, Hand Driven
CIE/222M hand-cranked 3-terminal earth tester for earth resistance, five range 0-1-10-100-1,000-10,000 Ω, in a cast aluminium body. Accuracy ±5% to IS 9223:1979.
-
Enquire about Hioki 3504-60
Hioki 3504-60 C HiTester with GP-IB and 4-Terminal Contact Check
High-speed C meter (capacitance and D) for production: 2 ms measurement at 120 Hz or 1 kHz, constant-voltage mode for voltage-dependent capacitors; probes and fixtures sold separately. Built-in GP-IB and RS-232C, BIN function and contact failure detection on all 4 terminals.
-
Enquire about Meco 90DQ
Meco 90DQ Multifunctional Calibrator
Bench multifunctional calibrator for AC / DC volt, amp and frequency meters, resistance meters and insulation testers; 5½-digit LED, 50 A output leads.
-
Enquire about Kyoritsu KEW 1109S
Kyoritsu KEW 1109S Analogue Multimeter
Analogue multimeter with a mirrored scale for accurate reading, an output terminal that blocks DC when measuring AC voltage, and safety-designed terminals and leads.
-
Enquire about Waco AET 0-10
Waco AET 0-10 Analogue Earth Tester 0-10 Ω, Single Range, 4 Terminal, Hand Driven
Hand-cranked analogue 4-terminal earth tester from Waco, single range 0-10 Ω, for earth electrode resistance and soil resistivity checks on site, with no batteries to run down.
-
Enquire about Metrel MD 9210
Metrel MD 9210 Mini Clamp Meter
Compact 4000-count AC clamp meter with 26 mm jaw: AC current to 600 A, AC / DC voltage to 600 V, resistance to 40 MΩ, capacitance, frequency, diode and continuity; CAT III 600 V.
-
Enquire about Autonics KRN100-02100-00-0S
Autonics KRN100-02100-00-0S 100 mm Hybrid Recorder KRN100-02100-00-0S
Autonics KRN100-02100-00-0S 100 mm hybrid recorder (KRN100 Series): 320 × 120 pixel resolution, 100-240 VAC 50 / 60 Hz supply, IP50 (front part, IEC standard). Order code note: 2CH*DI6.
-
Enquire about Selec ASVG-100
Selec ASVG-100 Advanced Static Var Generator ASVG-100
Selec ASVG-100 advanced static var generator: 70A harmonic current, 308V to 460V supply.
-
Enquire about MCM Instruments EMC-25Plus
MCM Instruments EMC-25Plus Electric Motor Checker
Portable motor checker for on-site checks of three-phase machines and stored motors: insulation to 20 MΩ at 500 V DC, resistance to 200 Ω and inductance to 1000 mH, each in 6 ranges.
-
Enquire about Multispan MFM-13-E5
Multispan MFM-13-E5 Multifunction Meter, 3 Line Display (MFM 13-M1)
Panel multifunction meter for single and three-phase systems with a 3-line LED display, PT primary up to 520 kV, pulse output and RS-485 Modbus.
-
Enquire about Veritek VIPS 84-60
Veritek VIPS 84-60 Energy Meter, 60 A Direct, LED
Three-phase energy meter for direct connection up to 60 A, 8-digit LED kWh display, class 0.5 active energy, THD.
-
Enquire about Minilec D5 PTA1
Minilec D5 PTA1 Power Factor Transducer
Minilec D5 PTA1 power factor transducer. Typical uses: cogeneration /captive power plants, control & relay panel, metering panels.
-
Enquire about SEW 4235 ER
SEW 4235 ER 4-Wire Earth Resistance / Earth Resistivity Tester
IP65 earth resistance and soil resistivity tester: 2, 3 and 4-wire tests from 0.01 Ω to 2 kΩ, resistivity up to 628 kΩ.m, earth voltage to 300 V, automatic C and P spike checks and 200-result memory. Instrument only.
-
Enquire about Masibus VT7S12E
Masibus VT7S12E Dual Channel Vibration Transmitter
Masibus VT7S12E dual channel vibration transmitter. For cooling towers, pumps.
-
Enquire about Kusam Meco 285-A HD
Kusam Meco 285-A HD Clip-On High Voltage Indicator, 3 – 7 kV
Clip-on high voltage indicator for cables at 3 – 7 kV: senses the field around the cable without contact and flashes a LIVE warning on its LCD; continuous monitoring, no batteries.
