Hioki PW3335-04 Power Meter with GP-IB, D/A Output and External Sensor Terminal
- Brand
- Hioki
- Model number
- PW3335-04
- Category
- Power and Energy Meters
Single-phase power meter with ±0.1% basic accuracy, 1 mA to 20 A ranges (30 A continuous), DC and 0.1 Hz to 100 kHz, SPECpower compatible. Built-in LAN, RS-232C, GP-IB, D/A output and external sensor terminal.
Price and availability on request
Key features
- Compatible with the SPECpower® benchmark for server power consumption
- High-precision ±0.1% basic accuracy
- Wide 1mA to 20A measurement range, max. continuous input of 30 A
- Wide frequency bandwidth of 0.1 Hz to 100 kHz or DC
- Measure harmonic and standby power consumption according to IEC62301
- Achieve superior accuracy even with a low power factor for no-load testing of transformers and motors
- Synchronized control using up to 8 instruments
- Built-in external sensor input terminals to measure up to 5000 A AC (PW3335-03, PW3335-04 only)
- Send measured values to Hioki data loggers using a Bluetooth® wireless technology compatible adapter
Specifications
| Measurement lines | Single-phase/ two-wires |
|---|---|
| Measurement items | Voltage, current, active power, apparent power, reactive power, power factor, phase angle, frequency, maximum current ratio, current integration, active power integration, integration time, voltage waveform peak value, current waveform peak value, voltage crest factor, current crest factor, time average current, time average active power, voltage ripple rate, current ripple rate |
| Harmonic parameters | Synchronization frequency range : 10 Hz to 640 Hz Maximum analysis order : 50th Harmonic voltage RMS value, harmonic current RMS value, harmonic active power, total harmonic voltage distortion, total harmonic current distortion, fundamental wave voltage, fundamental wave current, fundamental wave active power, fundamental wave apparent power, fundamental wave reactive power, fundamental wave power factor (displacement power factor), fundamental wave voltage current phase difference, harmonic vol |
| Measurement ranges | [Voltage] AC/DC 6 V to 1000 V, 8 ranges [Current] AC/DC 1 mA to 20 A, 14 ranges [Power] 6.0000 mW to 20.000 kW (Depends on combination of voltage and current range) Effect of power factor : ±0.1% f.s. or less (45 to 66 Hz, at power factor = 0) |
| Integration measurement | (Integration time up to 10,000 hours) Switchable between fixed-range integration and auto-range integration. [Current] No. of displayed digits: 6 digits (from 0.00000 mAh, polarity-independent integration and sum value) [Active power] No. of displayed digits: 6 digits (from 0.00000 mWh, polarity-independent integration and sum value) |
| Input resistance (50/60 Hz) | [Voltage input terminal] 2 MΩ [Current input terminal] 520 mΩ or less (at 1 mA to 100 mA range), 15 mΩ or less (at 200 mA to 20 A range) |
| Basic accuracy (Active power) | ±0.1% rdg. ±0.1% f.s. (DC) ±0.1% rdg. ±0.05% f.s. (45 Hz to 66 Hz, at input < 50% f.s.) ±0.15% rdg. (45 Hz to 66 Hz, at 50% f.s. ≤ input) |
| Display refresh rate | 5 times/s to 20 seconds (depend on average times settings) |
| Frequency characteristics | DC, 0.1 Hz to 100 kHz |
| D/A output (-02/-04 models only) | 7 channels (selectable from the following items): level output DC ±2 V f.s. or 5 V f.s., waveform output 1 V f.s., level output, instantaneous waveform output (voltage, current, active power), level output (apparent power, reactive power, power factor, or other), high-speed level output (voltage, current, active power) |
| Functions | [Rectification method] AC+DC, AC+DC Umn, AC, DC, FND, Auto-range, Average, VT or CT ratio settings, Synchronized control, MAX/MIN, and more |
| Logger connectivity | Sends measured values wirelessly to logger by using a Bluetooth® wireless technology serial conversion adapter. (Supported devices: Hioki LR8410 Link-compatible loggers), Ver. 1.1 and later, the PW3335-01 is not supported |
| Interfaces | LAN (all models), RS-232C (except -01 model, for communication/LR8410 link), GP-IB (-01, -04 models only) |
| Power supply | 100 V to 240 V AC, 50/60 Hz, 30 VA max. |
| Dimensions and mass | 210 mm (8.27 in)W × 100 mm (3.94 in)H × 245 mm (9.65 in)D, 3 kg (105.8oz) |
| Contents | Instruction manual ×1, power cord ×1, voltage and current input terminal safety cover ×2, safety cover installation screws (M3 × 6 mm) ×4 |
|---|
| Order code | PW3335-04 (Built-in LAN, RS-232C, GP-IB, D/A output, external sensor terminal) |
|---|
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about Hioki CM3286-50
Hioki CM3286-50 AC Clamp Power Meter
Handheld clamp power meter for voltage, current, power, power factor, phase angle and frequency on live single-phase and balanced three-phase circuits, with four readings shown at once.
-
Enquire about Hioki PW3335
Hioki PW3335 Power Meter
Single-phase power meter with ±0.1% basic accuracy, 1 mA to 20 A ranges (30 A continuous), DC and 0.1 Hz to 100 kHz, SPECpower compatible. Built-in LAN and RS-232C.
-
Enquire about Hioki PW3335-01
Hioki PW3335-01 Power Meter with GP-IB
Single-phase power meter with ±0.1% basic accuracy, 1 mA to 20 A ranges (30 A continuous), DC and 0.1 Hz to 100 kHz, SPECpower compatible. Built-in LAN and GP-IB.
-
Enquire about Hioki PW3335-02
Hioki PW3335-02 Power Meter with D/A Output
Single-phase power meter with ±0.1% basic accuracy, 1 mA to 20 A ranges (30 A continuous), DC and 0.1 Hz to 100 kHz, SPECpower compatible. Built-in LAN, RS-232C and D/A output.
