Kusam Meco CA 1000 AC/DC Current Clamp Adaptor
- Brand
- Kusam Meco
- Model number
- CA 1000
- Category
- Test Leads & Probes
AC / DC clamp adaptor for multimeters and oscilloscopes: DC 1000 A, AC 1000 A, 57 mm jaw for cables or 70 × 18 mm bus bars, auto zero; CAT II 1000 V.
Price and availability on request
Downloads
- Datasheet: Kusam Meco CA 1000 PDF, 118 KB
Key features
- Measures current without breaking the circuit or affecting the insulation
- Auto zero
- Connects to an oscilloscope for waveform analysis
- Cable about 2 m when fully stretched
Specifications
| DC current | 0 A – 1000 A |
|---|---|
| AC current (average sensing) | 0 A – 1000 A |
| Basic accuracy | 1.5% of reading + 2 A |
| Jaw opening | Φ57 mm; 70 × 18 mm bus bars |
|---|---|
| Low battery indicator | Red LED |
| Power supply | 9 V battery |
| Dimensions | Approx. 100 (W) × 224 (L) × 40 (H) mm |
| Accessories | Carrying case, battery, user manual |
| Category | CAT II 1000 V |
|---|
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about Kusam Meco CA 2000
Kusam Meco CA 2000 AC/DC Current Clamp Adaptor
AC / DC clamp adaptor for multimeters and oscilloscopes: DC 2000 A, AC 1500 A, 57 mm jaw for cables or 70 × 18 mm bus bars, auto zero; CAT II 1000 V.
-
Enquire about Kusam Meco CA 3000
Kusam Meco CA 3000 Flexible Current Probe (Rogowski Coil)
Rogowski flexible current probe for any multimeter: 18-inch coil around conductors up to 5.8 inches, 30 A / 300 A / 3000 A AC ranges with 100 / 10 / 1 mV per A output and banana plugs; CAT III 1000 V / CAT IV 600 V.
-
Enquire about Kusam Meco CA 3000D
Kusam Meco CA 3000D Flexible Current Probe (Rogowski Coil) with Display
Rogowski flexible current probe with its own display: 18-inch coil around conductors up to 5.8 inches, 30 A / 300 A / 3000 A AC ranges, true RMS, readings to 3150; CAT III 1000 V / CAT IV 600 V.
-
Enquire about Kusam Meco CA 500
Kusam Meco CA 500 500 A AC/DC Current Clamp Adaptor
AC / DC clamp adaptor that turns any multimeter into a 500 A clamp meter (1 mV per A into the 2 V or 20 V range), 30 mm jaw, 50 – 400 Hz; also for oscilloscopes; CAT II 600 V.
