Hioki

185 Hioki products listed. For prices and availability, send an enquiry.

Enquire about Hioki

BT3562-01 Battery HiTester with GP-IB

Battery HiTester for packs up to 60 V and large low-resistance cells: 0 Ω to 3.1 kΩ (0.1 μΩ resolution) and ±60 V DC (10 μV resolution); GP-IB and analog output built in.

Enquire about BT3562-01
BT3562A Battery HiTester

Battery HiTester measuring internal resistance and open circuit voltage together for large xEV cells or packs up to 100 V: 0 Ω to 3.1 kΩ with 0.1 μΩ resolution; LAN, RS-232C and EXT I/O.

Enquire about BT3562A
BT3563-01 Battery HiTester with GP-IB

Battery HiTester for high-voltage packs and modules up to 300 V: 0 Ω to 3.1 kΩ (0.1 μΩ resolution) and ±300 V DC (10 μV resolution); GP-IB and analog output built in.

Enquire about BT3563-01
BT3563A Battery HiTester

Battery HiTester measuring internal resistance and open circuit voltage together for large xEV packs up to 300 V: 3 mΩ to 3 kΩ ranges and 6/60/300 V ranges; LAN, RS-232C and EXT I/O.

Enquire about BT3563A
BT3564 Battery HiTester

Battery HiTester for EV and PHEV high-voltage packs up to 1000 V: internal resistance 0.1 μΩ to 3000 Ω, voltage to ±999.999 V DC, spark discharge reduction; leads sold separately.

Enquire about BT3564
BT4560-50 Battery Impedance Meter

Battery impedance meter for EIS from 0.01 Hz to 1.05 kHz, measuring impedance, voltage and temperature together, with R&D software and LAN for production lines; probes sold separately.

Enquire about BT4560-50
BT4560-60 Battery Impedance Meter

Battery impedance meter for EIS from 0.01 Hz to 10 kHz, measuring impedance, voltage and temperature together, scalable with the switch mainframe; probes sold separately.

Enquire about BT4560-60
BT5525 Battery Insulation Tester

Insulation tester for battery production lines, with a BDD function that detects tiny short circuits caused by contamination and stable insulation testing in noisy environments.

Enquire about BT5525
BT6065 Precision Battery Tester

Precision battery tester for high-speed OCV/IR cell grading: two testers work in tandem without interference, with channel-specific correction and an optional multiplexer. AC-IR resolution to 0.01 µΩ, DC voltage resolution to 10 µV.

Enquire about BT6065
BT6075 Precision Battery Tester

Precision battery tester for high-speed OCV/IR cell grading: two testers work in tandem without interference, with channel-specific correction and an optional multiplexer. AC-IR resolution to 0.01 µΩ, DC voltage resolution to 1 µV.

Enquire about BT6075
CM3281 AC Clamp Meter

Average-rectifying AC clamp meter with a slim jaw for narrow cable gaps, measuring up to 2000 A AC plus AC/DC voltage, resistance and continuity; -25°C to 65°C operation.

Enquire about CM3281
CM3286-50 AC Clamp Power Meter

Handheld clamp power meter for voltage, current, power, power factor, phase angle and frequency on live single-phase and balanced three-phase circuits, with four readings shown at once.

Enquire about CM3286-50
CM3286-90 AC Clamp Power Meter with Wireless Adapter

Handheld AC clamp power meter showing four parameters at once, measuring from 5 W and 60 mA, with simple energy and phase measurement. Bundled with the Z3210 wireless adapter for the GENNECT Cross app.

Enquire about CM3286-90
CM3289 AC Clamp Meter

True RMS AC clamp meter for up to 1000 A AC with a thinner redesigned sensor, plus AC/DC voltage, resistance and continuity; successor to the 3280-20F, -25°C to 65°C operation.

Enquire about CM3289
CM3291 AC Clamp Meter

True RMS AC clamp meter with a slim jaw for narrow cable gaps, measuring up to 2000 A AC plus AC/DC voltage, resistance and continuity; -25°C to 65°C operation.

Enquire about CM3291
CM4001 AC Leakage Clamp Meter

True RMS AC leakage clamp meter with slim jaws, 60 mA to 600 A ranges covering leakage through load current, for tracking down intermittent RCD and GFCI trips. Z3210 wireless adapter sold separately.

Enquire about CM4001
CM4001-90 AC Leakage Clamp Meter with Wireless Adapter

True RMS AC leakage clamp meter with slim jaws, 60 mA to 600 A ranges covering leakage through load current, for tracking down intermittent RCD and GFCI trips. Bundled with the Z3210 wireless adapter for the GENNECT Cross app.

Enquire about CM4001-90
CM4002 AC Leakage Clamp Meter

True RMS AC leakage clamp meter with a new sensor for very small leakage currents, 6 mA to 200 A ranges, jaw up to φ40 mm, compliant with IEC/EN 61557-13. Z3210 wireless adapter sold separately.

Enquire about CM4002
CM4002-90 AC Leakage Clamp Meter with Wireless Adapter

True RMS AC leakage clamp meter with a new sensor for very small leakage currents, 6 mA to 200 A ranges, jaw up to φ40 mm, compliant with IEC/EN 61557-13. Bundled with the Z3210 wireless adapter for the GENNECT Cross app.

Enquire about CM4002-90
CM4003 AC Leakage Clamp Meter with Output

True RMS AC leakage clamp meter with output and external power supply functions, a sensor for very small leakage currents, 6 mA to 200 A ranges and IEC/EN 61557-13 compliance. Z3210 wireless adapter sold separately.

Enquire about CM4003
CM4003-90 AC Leakage Clamp Meter with Output with Wireless Adapter

True RMS AC leakage clamp meter with output and external power supply functions, a sensor for very small leakage currents, 6 mA to 200 A ranges and IEC/EN 61557-13 compliance. Bundled with the Z3210 wireless adapter for the GENNECT Cross app.

Enquire about CM4003-90
CM4141-50 AC Clamp Meter

True RMS AC clamp meter for up to 2000 A AC with a thin sensor for tight spaces; AC/DC voltage to 1000 V (2000 V DC with the P2010 probe), resistance and frequency; CAT IV 600 V. Z3210 wireless adapter sold separately.

Enquire about CM4141-50
CM4141-90 AC Clamp Meter with Wireless Adapter

True RMS AC clamp meter for up to 2000 A AC with a thin sensor for tight spaces; AC/DC voltage to 1000 V (2000 V DC with the P2010 probe), resistance and frequency; CAT IV 600 V. Bundled with the Z3210 wireless adapter for the GENNECT Cross app.

Enquire about CM4141-90
CM4371-50 AC/DC Clamp Meter

True RMS AC/DC clamp meter with 20 A and 600 A ranges, inrush current in RMS and crest values, and DC voltage to 1000 V (2000 V with the P2010 probe) for solar panel checks; CAT IV 600 V. Z3210 wireless adapter sold separately.

Enquire about CM4371-50

Show more products

Products