Hioki
185 Hioki products listed. For prices and availability, send an enquiry.
Products
-
Enquire about RM3544-01
RM3544-01 Resistance Meter with Interfaces
Resistance meter with 0.02% basic accuracy and 30 mΩ to 3 MΩ ranges (1 μΩ resolution, 300 mA max.), with temperature correction for copper wiring. EXT I/O, RS-232C and USB built in.
-
Enquire about RM3545-01
RM3545-01 Resistance Meter with GP-IB
Resistance meter with 0.006% basic accuracy, 0.01 μΩ resolution, 1 A testing current, 10 mΩ to 1000 MΩ ranges and a low-power mode; GP-IB built in.
-
Enquire about RM3545A-1
RM3545A-1 Resistance Meter Single Channel
Resistance meter with 1 nΩ resolution and 1 A testing current, measuring 1 nΩ to 1200 MΩ with OVC and temperature correction; probe sold separately. Single-channel model.
-
Enquire about RM3545A-2
RM3545A-2 Resistance Meter Multiplexer Model
Resistance meter with 1 nΩ resolution and 1 A testing current, measuring 1 nΩ to 1200 MΩ with OVC and temperature correction; probe sold separately. Takes up to two Z3003 multiplexer units for 20 channels.
-
Enquire about RM3546
RM3546 Resistance Meter
Low-resistance meter for weld inspection on battery pack and module lines: 1 nΩ resolution, active circuit protection up to 60 V DC, and A-TC for stable readings on hot welds.
-
Enquire about RM3548-50
RM3548-50 Resistance Meter
Portable resistance meter with 0.02% basic accuracy, 0.1 µΩ to 3.5 MΩ, 1 A testing current, automatic temperature correction, and data to Excel or the mobile app.
-
Enquire about SM7110
SM7110 Super Megohm Meter
Single-channel super megohm meter for very high resistance: up to 1000 V output, 2 × 10^19 Ω maximum display, 0.1 fA minimum resolution and 300 times better noise resistance.
-
Enquire about SM7120
SM7120 Super Megohm Meter
Single-channel super megohm meter for very high resistance: up to 2000 V output, 2 × 10^19 Ω maximum display, 0.1 fA minimum resolution and 300 times better noise resistance.
-
Enquire about SM7420
SM7420 Super Megohm Meter
Four-channel super megohm meter for mass production on automated machines: rated at 6000 ps/minute, channel-independent low-capacity contact check, 300 times better noise resistance.
-
Enquire about SM7810
SM7810 Super MΩ HiTester
Eight-channel tester for MLCC leakage current: 6.8 ms per test on 8 channels at once, 1 pA to 1 mA ranges, 0.1 to 1000 V test voltage; made to order. 100/110 V AC power supply.
-
Enquire about SM7810-20
SM7810-20 Super MΩ HiTester 220 V
Eight-channel tester for MLCC leakage current: 6.8 ms per test on 8 channels at once, 1 pA to 1 mA ranges, 0.1 to 1000 V test voltage; made to order. 220 V AC power supply.
-
Enquire about SS7081-50
SS7081-50 Battery Cell Voltage Generator
12-channel battery cell voltage generator for BMS validation, used in place of real cells: 0 to 5.025 V per channel at up to ±1 A, ±0.015% output accuracy; control PC and software not included.
-
Enquire about ST4030A
ST4030A Impulse Winding Tester
Impulse winding tester that finds layer shorts in motor and coil windings by comparing response waveforms: 200 MHz sampling, 12-bit resolution, LC/RC quantification, 10 μH to 100 mH.
-
Enquire about ST4200-50
ST4200-50 Partial Discharge Detector
Partial discharge detector for motor windings with AC and surge dual-mode detection, a high-frequency CT for noise resistance, 200 MS/s sampling and SW2001 multiplexer support.
-
Enquire about ST5520
ST5520 Insulation Tester
Production-line insulation tester: test voltage set from 25 V to 1000 V in 1 V steps, results in as fast as 50 ms, quick discharge and contact check; test leads sold separately. Built-in external I/O output.
-
Enquire about ST5520-01
ST5520-01 Insulation Tester with BCD Output
Production-line insulation tester: test voltage set from 25 V to 1000 V in 1 V steps, results in as fast as 50 ms, quick discharge and contact check; test leads sold separately. Built-in BCD output.
-
Enquire about ST5680A
ST5680A DC Hipot Tester
DC hipot tester for EV battery testing: DC hipot with 0.001 µA resolution, insulation resistance and breakdown voltage tests, waveform recording and contact check; CE, UKCA and CSA certified.
