Hioki BT4560-60 Battery Impedance Meter
- Brand
- Hioki
- Model number
- BT4560-60
- Category
- Battery Testers
Battery impedance meter for EIS from 0.01 Hz to 10 kHz, measuring impedance, voltage and temperature together, scalable with the switch mainframe; probes sold separately.
Price and availability on request
Key features
- EIS measurement frequency: 0.01 Hz to 10 kHz
- Simultaneous measurement of impedance, voltage, & temperature
- Convenient evaluation application software for R&D use
- Data compatibility with third-party equivalent circuit analysis software
- For production lines
- Scalability with the Switch Mainframe
Specifications
| Allowable input voltage | Up to 5 V |
|---|---|
| Measured items | Impedance, voltage, temperature |
| Impedance measurement | Parameters: R (resistance), X (reactance), Z (impedance), θ (phase angle) Frequency: 0.01 Hz to 10.00 kHz (For the 1.06 kHz to 10.00 kHz range, measurements below 1 mΩ in the 3 mΩ and 10 mΩ ranges, and below 10 mΩ in the 100 mΩ range, are not covered by the accuracy guarantee.) Measurement ranges: 3.0000 mΩ, 10.0000 mΩ, 100.000 mΩ Measurement current: 3 mΩ range: 1.5 A rms, 10 mΩ range: 500 mA rms, 100 mΩ range: 50 mA rms |
| Voltage measurement | Measurement range: 5.00000 V (single range), measurement time: 0.1 s (FAST) to 1.0 s (SLOW) |
| Temperature measurement | Range: -10.0°C to 60.0°C, measurement time: 2.3 s |
| Basic accuracy | Z : ±0.4% rdg. θ: ±0.1°, V: ±0.0035% rdg. ±5 dgt., Temperature: ±0.5°C (at 10.0°C to 40.0°C) |
| Functions | Comparator, self-calibration, sample delay, average, voltage limit, potential gradient compensation for impedance measurement, charge/discharge prevention during AC signal application, key lock, system test, panel saving and loading (up to 126 condition sets) |
| Interfaces | LAN, RS-232C, USB, EXT. I/O (NPN/PNP can be switched) |
| Power supply | Rated supply voltage: 100 V to 240 V AC Rated supply frequency: 50 Hz/60 Hz Rated power 80 VA max |
| Dimensions and weight | Approx. 330W × 80H × 293D mm (12.99W × 3.15H × 11.54D in.), approx. 3.8 kg (134.0 oz.) |
| Contents | Power cord × 1, instruction manual × 1, zero-adjustment board × 1, USB cable (A-B type) × 1 |
|---|
| Order code | BT4560-60 |
|---|---|
| Note | Measurement probes are not included with this product. Please separately select and purchase the measurement probe options appropriate for your application. |
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about Hioki 3561
Hioki 3561 Battery HiTester
Battery HiTester for production lines of small battery packs: internal resistance from 0.01 mΩ to 3.1 Ω and voltage to 20 V DC, sampling from 4 ms; measurement leads sold separately.
-
Enquire about Hioki 3561-01
Hioki 3561-01 Battery HiTester with GP-IB
Battery HiTester for production lines of small battery packs: internal resistance from 0.01 mΩ to 3.1 Ω and voltage to 20 V DC, sampling from 4 ms; measurement leads sold separately. Built-in GP-IB interface.
-
Enquire about Hioki BT3554-50
Hioki BT3554-50 Battery Tester
Handheld battery tester that judges degradation (PASS, WARNING, FAIL) from internal resistance and voltage, even while the battery stays connected: 3 mΩ to 3 Ω, ±6 V to ±60 V. Pin type lead not included.
-
Enquire about Hioki BT3554-51
Hioki BT3554-51 Battery Tester with Pin Type Lead 9465-10
Handheld battery tester that judges degradation (PASS, WARNING, FAIL) from internal resistance and voltage, even while the battery stays connected: 3 mΩ to 3 Ω, ±6 V to ±60 V. Supplied with pin type lead 9465-10.
