54, Ezra Street , Kolkata - 700001 , West Bengal, IndiaMonday to Saturday, 10:30 am to 6:30 pm

Industrial Supply Syndicate Kolkata, since 1977 Send an enquiry
Hioki BT5525 Battery Insulation Tester

Hioki BT5525 Battery Insulation Tester

Brand
Hioki
Model number
BT5525

Insulation tester for battery production lines, with a BDD function that detects tiny short circuits caused by contamination and stable insulation testing in noisy environments.

Price and availability on request

Request a quote

Sent with the product details: Hioki BT5525 Battery Insulation Tester.

A phone number or an email address is needed, so we can reply.

We use these details only to reply to your enquiry. See our privacy notice.

Key features

  • Ideal for battery production lines
  • BDD function for detecting minuscule short-circuits caused by contamination before batteries are shipped
  • Stable insulation resistance testing even in noisy environments
  • High cost performance thanks to accessible pricing, high-speed testing, and compact footprint
  • Contact check function reduces the number of false negatives caused by equipment issues

Specifications

Specifications
Main functionsInsulation resistance test Break Down Detect function (BDD) Contact check function
Output specificationsOutput voltage : 25 V to 500 V, Setting resolution 1 V Charging current (Current limit function) : 50 µA to 50 mA, Minimum setting resolution 10 μA Short-circuit current : 60 mA or less Discharge current : 40 mA or greater: Constraints involving the output generator will result in an error, making measurement impossible, if a capacitive load of approximately 50 μF or greater is connected while using a current limit setting of 5.1 mA or greater.: When using a current limit setting of 5.1 mA or gr
Measurement specificationsResistance value display range : 0.050 MΩ to 9999 MΩ Resistance range : 2 MΩ, 20 MΩ, 200 MΩ, 2000 MΩ, AUTO
Basic specifications±1.5％ rdg.±2 dgt. 25 V ≤ V < 100 V [0.05 MΩ to 2 MΩ], 100 V ≤ V ≤ 500 V [0.2 MΩ to 20 MΩ]
Time specificationsTest time : 0.050 s to 999.999 s, OFF Comparator delay time : 0.001 s to 999.999 s, AUTO Display update speed : 1 PLC Sampling time : 1 PLC to 100 PLC
Memory functionsPanel save function : Saves up to 15 sets of measurement conditions Measured value memory function : Saves up to 999 measured values in the instrument's internal memory
Judgment functionsTest modes : Continuous test, PASS STOP, FAIL STOP Comparator function : UPPER_FAIL : Measured value > upper limit value PASS : Upper limit value ≥ measured value ≥ lower limit value LOWER_FAIL : Measured value < lower limit value
Various functionsBreak Down Detect function (BDD) : Detecting minuscule insulation defects caused by contamination Contact check function : 2-terminal capacitance measurement method Automatic data output function : Automatic output of measurement results via communication interface after completion of test Command monitor function : Screen display of commands being sent and received External I/O monitor function : Screen display of output signal ON/OFF and input signal status Analog output function : Converts me
InterfacesUSB, LAN, RS-232C, EXT. I/O
Power supply100 V to 240 V AC
Power consumptionApprox. 20 VA: Power supply conditions are 220 V supply voltage, 50, 60 Hz supply frequency, 200 V test voltage, 2 mA current limit, and load (1 GΩ resistor and 0.1 μF capacitor connected in parallel).
Maximum rated power100 VA
Dimensions and massApprox. 215 mm (8.46 in) W × 80 mm (3.15 in) H × 306.5 mm (12.07 in) D (excluding protruding parts), Approx. 2.8 kg (98.8 oz)
Supplied with
ContentsPower cord ×1, EXT. I/O male connector ×1, EXT. I/O connector cover ×1, EXT. I/O interlock cancellation jig ×1, Startup Guide ×1
Ordering
Order codeBT5525

Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.

Related products