54, Ezra Street , Kolkata - 700001 , West Bengal, IndiaMonday to Saturday, 10:30 am to 6:30 pm

Industrial Supply Syndicate Kolkata, since 1977 Send an enquiry
Masibus 9000C Signal Isolator

Masibus 9000C Signal Isolator

Brand
Masibus
Model number
9000C

Masibus 9000C signal isolator: input Voltage / Current, output Voltage / Current, 20 to 265V DC/AC 50-60Hz, ≤3W supply. For field interface device, isolation of field signals.

Price and availability on request

Request a quote

Sent with the product details: Masibus 9000C Signal Isolator.

A phone number or an email address is needed, so we can reply.

We use these details only to reply to your enquiry. See our privacy notice.

Key features

  • Available in Aux Powered (AP) and Loop Powered (LP) options
  • Slim DIN rail mount design of 12.5mm for single output and 17.5mm for dual output
  • Rugged & accurate 4 wire and 2 wire Isolator
  • Switch option for 0/4-20mA, 0/1-5V and 0-10V I/O selection
  • Extended universal power supply range: 20V to 265V DC or AC (Aux Powered Model)
  • Up to 2 outputs with short circuit protection
  • Full three port isolation
  • High CMRR and NMRR
  • High output load driving capability
  • Wide zero & span adjustment limits
  • Front calibration facility via multiturn trimpot
  • Lowest long term drift
  • Available with EMI-EMC compliance (optional)
  • HART pass through feature (optional, available in AP compatible with 2 wire transmitter)

Specifications

Input
Input TypeVoltage / Current
Input Range‘S' Version: 4-20mA ‘M' Version: 0/4 to 20mA, 0/1 to 5V, 0 to 10VDC (DIP switch selection)
Input Impedance Current Input Voltage Input≤10 Ω ≥1 MΩ
Temperature Coefficient≤100 ppm/°C
CMRR>100 dB
NMRR>70 dB
Output
Output TypeVoltage / Current
Output Range‘S' Version: 4-20mA ‘M' Version: 0/4 to 20mA , 0/1 to 5V, 0 to 10VDC (DIP switch selection)
Response Time≤50ms
Output Loop Status LEDGreen ("S" version only)
Directive Conformity
Low Voltage Directive 2014/35/EU*IEC 61010-1 :2010
*Applicable only for CE marked9000C SOP Aux Powered ‘S' and ‘M' Model.
Power Supply
Supply Voltage20 to 265V DC/AC 50-60Hz, ≤3W
Physical
MountingTypeDIN Rail (35mm)
Terminal BlockUL, CSA standard
Terminal Cable Size2.5 mm2
Enclosure MaterialPA66
IP RatingIP20
Size
SOP Model (in mm)12.5(W) x 100.2(H) x 115.2(D)
DOP Model (in mm)17.5(W) x 100.2(H) x 115.2(D)
Weight
SOP Model100 gms approx
DOP Model130 gms approx
Environmental
Operating Temperature0 to 55 °C
Relative Humidity30 to 95% RH (Non-Condensing)
ProtectionConformal Coating on PCB
Product
ApplicationsField interface device, Isolation of field signals, Distribution of signals, Factory automation, Translation of signals, SCADA, DCS, Impedance matching of transmitters and receiver instruments, Powering of field transmitters
IndustriesPower Stations, Cement, Waste Water Treatment Plants, Sugar, Pulp & Paper, Metal, Panel Manufacturing

Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.

Related products