Skip to content

Test & Measuring Instruments

Portable and bench instruments for electricians, maintenance teams, test labs and quality departments: from multimeters and clamp meters to insulation, earth, power quality and environmental testers.

All products in Test & Measuring Instruments

Lutron EMF-824 EMF Adapter with Separate Probe for Multimeters

Adapter that turns a digital multimeter on its DC 200 mV range into an EMF meter: 1 mV per milligauss, 30 to 300 Hz, single-axis separate probe.

Enquire about Lutron EMF-824
Rishabh LTRC-6 195/130(40) Resin Cast Metering Current Transformer

Epoxy resin cast metering CT LTRC-6 (195/130(40)), 2500 A to 3200 A primary, 5 A or 1 A secondary, class 0.5 or 1, transparent terminal cover, wall mounting.

Enquire about Rishabh LTRC-6 195/130(40)
Fluke BC190/808 Line Voltage Adapter / Battery Charger for ScopeMeter

Mains adapter and battery charger for ScopeMeter 190 Series test tools.

Enquire about Fluke BC190/808
CIE CIE/7120 MOT Transformer Oil Test Set 0-120kV, Motor Operated

Oil breakdown voltage (BDV) test set to IS 6792:1992 for transformer and switchgear oil: 0-120 kV, 1200 VA, cast resin HV transformer, motor operated version, brass electrodes with 2.5 / 4 mm gap and interlocked chamber.

Enquire about CIE CIE/7120 MOT
Hioki RM3545-01 Resistance Meter with GP-IB

Resistance meter with 0.006% basic accuracy, 0.01 μΩ resolution, 1 A testing current, 10 mΩ to 1000 MΩ ranges and a low-power mode; GP-IB built in.

Enquire about Hioki RM3545-01
Meco VIF96U 3-Phase VAF / VIF Meter, TRMS

Three-phase TRMS VAF meter showing volts, amps, frequency, run hours, on hours and RPM on 3 rows of bright red LEDs; programmable CTR, PTR and poles.

Enquire about Meco VIF96U
Kusam Meco KM 035 600 A AC/DC True RMS Clamp Meter with AmpTip and EF Detection

600 A AC / DC true RMS clamp meter with slim 26 mm jaw and AmpTip™ for 0.01 A – 60 A, 5 ms crest mode, BeepLit™ continuity and non-contact / probe EF detection; CAT III 600 V / CAT IV 300 V.

Enquire about Kusam Meco KM 035
Lutron EMF-827 EMF Tester with Separate Probe

EMF tester with a separate probe for remote measurement of 30 to 300 Hz magnetic fields, with 20, 200 and 2,000 µT ranges.

Enquire about Lutron EMF-827
Rishabh LTRC-6 195/130(40) P Resin Cast Protection Current Transformer

Epoxy resin cast protection CT LTRC-6 (195/130(40)), class 5P with accuracy limit factor 5 or 10, 5 A or 1 A secondary, transparent terminal cover, wall mounting.

Enquire about Rishabh LTRC-6 195/130(40) P
Fluke BC190/820 Universal Line Voltage Adapter / Battery Charger for ScopeMeter

Universal mains adapter and battery charger (100 V to 240 V) for ScopeMeter 190 Series test tools.

Enquire about Fluke BC190/820
CIE DCM 2250 TR Digital Clamp Multimeter 1000A AC, True RMS

True RMS clamp multimeter for AC current up to 1000 A with a 40 mm jaw and 6000-count auto-ranging display, plus AC/DC volts, Low-Z, resistance to 60 MΩ, NCV, data hold, MIN/MAX and a torch.

Enquire about CIE DCM 2250 TR
Hioki RM3545A-1 Resistance Meter Single Channel

Resistance meter with 1 nΩ resolution and 1 A testing current, measuring 1 nΩ to 1200 MΩ with OVC and temperature correction; probe sold separately. Single-channel model.

Enquire about Hioki RM3545A-1
Kusam Meco KM 039F True RMS Fork Clamp Meter

True RMS fork clamp meter: an open 12.5 mm fork slides onto wires in tight wiring and measures up to 200 A AC; plus 600 V, motor capacitor range, DC µA, temperature and Hi / Lo NCV; CAT III 600 V / CAT IV 300 V.

Enquire about Kusam Meco KM 039F
Lutron EMF-828 3-axis EMF Tester with Separate Probe

Three-axis EMF tester for 30 to 300 Hz fields with 20, 200 and 2000 µT ranges and a separate probe on a 930 mm cable.

Enquire about Lutron EMF-828
Rishabh LTRC-7 230/165(40) Resin Cast Metering Current Transformer

Epoxy resin cast metering CT LTRC-7 (230/165(40)), 3000 A to 3200 A primary, 5 A or 1 A secondary, class 0.5 or 1, transparent terminal cover, wall mounting.

Enquire about Rishabh LTRC-7 230/165(40)
Fluke BP120MH NiMH Battery Pack for Fluke 120 Series, 43 and 43B

Replacement NiMH battery pack for Fluke 120 Series ScopeMeters and 43 / 43B power quality analysers.

Enquire about Fluke BP120MH
CIE DCM 5410 TR Digital Clamp Multimeter 1000A AC/DC, True RMS

True RMS clamp multimeter for AC and DC current up to 1000 A with a 40 mm jaw, 6000-count display, capacitance, frequency, duty cycle, temperature, Low-Z, NCV and live wire test. CAT III 1000V.

Enquire about CIE DCM 5410 TR
Hioki RM3545A-2 Resistance Meter Multiplexer Model

Resistance meter with 1 nΩ resolution and 1 A testing current, measuring 1 nΩ to 1200 MΩ with OVC and temperature correction; probe sold separately. Takes up to two Z3003 multiplexer units for 20 channels.

Enquire about Hioki RM3545A-2
Kusam Meco KM 071 4-20 mA DC Process Clamp Meter

Process clamp meter that measures 4-20 mA loop current without breaking the circuit: 0.01 mA – ±40 mA DC, % of span readout, 5 mm jaw, backlight and spotlight.

Enquire about Kusam Meco KM 071
Lutron EMF-830 RF Field Strength Power Meter, 50 MHz to 3.5 GHz

Three-axis RF field strength meter for 50 MHz to 3.5 GHz, for GSM, WiFi, Bluetooth and microwave leakage checks, in V/m, mA/m and power density units.

Enquire about Lutron EMF-830
Rishabh LTRC-7 230/165(40) P Resin Cast Protection Current Transformer

Epoxy resin cast protection CT LTRC-7 (230/165(40)), class 5P with accuracy limit factor 5 or 10, 5 A or 1 A secondary, transparent terminal cover, wall mounting.

Enquire about Rishabh LTRC-7 230/165(40) P
Fluke BP290 Li-ion Battery, 2400 mAh

2400 mAh Li-ion battery for ScopeMeter 190 Series II/III, 120B, MDA-500 and 430-II analysers.

Enquire about Fluke BP290
CIE DET-2000 0-5-50-500 Digital Earth Resistance Tester 0-5-50-500 Ω, Triple Range, 4 Terminal

CIE DET-2000 handheld 4-terminal digital earth tester for earth resistance and soil resistivity, triple range 0-5-50-500 Ω, 3½ digit LCD and rechargeable Ni-Cd cells.

Enquire about CIE DET-2000 0-5-50-500
Hioki RM3546 Resistance Meter

Low-resistance meter for weld inspection on battery pack and module lines: 1 nΩ resolution, active circuit protection up to 60 V DC, and A-TC for stable readings on hot welds.

Enquire about Hioki RM3546

Show more products