Skip to content

Test & Measuring Instruments

Portable and bench instruments for electricians, maintenance teams, test labs and quality departments: from multimeters and clamp meters to insulation, earth, power quality and environmental testers.

All products in Test & Measuring Instruments

Kusam Meco KM 088 1000 A AC/DC True RMS Clamp Meter with VFD and EF Detection

1000 A AC / DC true RMS clamp meter with 51 mm jaw and AmpTip™ for 0.01 A – 60 A, VFD, low-pass filter, EF detection, flashlight and 5 ms crest mode; CAT III 1000 V / CAT IV 600 V.

Enquire about Kusam Meco KM 088
Lutron EMF-8218SD 3-axis EMF Tester, SD Card Logger

Triaxial EMF meter for 30 to 300 Hz fields showing X, Y, Z and total readings in µT or mG up to 2000 µT, with SD card data logging.

Enquire about Lutron EMF-8218SD
Rishabh Master 3440 Class 0.2S Multifunction Meter, Class 0.2S

Rish Master 3440 class 0.2S multifunction meter (IEC 62053-22) with harmonics to 31st and RS485 + 2 relays, RS485 + relay + 2 analog outputs or Ethernet options.

Enquire about Rishabh Master 3440 Class 0.2S
Fluke CNX 3000 Wireless Multimeter

True-rms wireless multimeter, 1000 V AC/DC, that also displays readings from CNX wireless modules; CAT III 1000 V, IP54.

Enquire about Fluke CNX 3000
CIE DET-2000 0-20-200 Digital Earth Resistance Tester 0-20-200 Ω, Dual Range, 4 Terminal

CIE DET-2000 handheld 4-terminal digital earth tester for earth resistance and soil resistivity, dual range 0-20-200 Ω, 3½ digit LCD and rechargeable Ni-Cd cells.

Enquire about CIE DET-2000 0-20-200
Hioki SM7810 Super MΩ HiTester

Eight-channel tester for MLCC leakage current: 6.8 ms per test on 8 channels at once, 1 pA to 1 mA ranges, 0.1 to 1000 V test voltage; made to order. 100/110 V AC power supply.

Enquire about Hioki SM7810
Kusam Meco KM 099 AC and AC+DC TRMS Power Clamp Multimeter, 1000 A

AC / AC+DC true RMS power clamp multimeter, 999.9 A AC / DC plus a 40 A AmpTip, 999.9 V, power W / VA / VAR / PF, THD%-F and DF%, temperature, capacitance; 51 mm jaw; CAT IV 600 V.

Enquire about Kusam Meco KM 099
Lutron EP-03H High Frequency Probe, 50 MHz to 3 GHz, for EMF-839

High frequency probe for the EMF-839 RF field meter covering 50 MHz to 3 GHz; each probe comes with its own calibration card, so no recalibration is needed.

Enquire about Lutron EP-03H
Rishabh Master 3440i Touch Screen Multifunction Meter

Rish Master 3440i multifunction TRMS meter with touch screen graphics lcd display, more than 46 parameters, class 1.0 (0.5 / 0.2 on request), RS485, pulse, analog or Ethernet options.

Enquire about Rishabh Master 3440i
Fluke CNX C3000 Premium Modular Tool Bag

Webbed modular tool bag for the CNX wireless system, with room for the meter, leads and iFlex clamps.

Enquire about Fluke CNX C3000
CIE DET-2000 0-20-200-2000 Digital Earth Resistance Tester 0-20-200-2,000 Ω, Triple Range, 4 Terminal

CIE DET-2000 handheld 4-terminal digital earth tester for earth resistance and soil resistivity, triple range 0-20-200-2,000 Ω, 3½ digit LCD and rechargeable Ni-Cd cells.

Enquire about CIE DET-2000 0-20-200-2000
Hioki SM7810-20 Super MΩ HiTester 220 V

Eight-channel tester for MLCC leakage current: 6.8 ms per test on 8 channels at once, 1 pA to 1 mA ranges, 0.1 to 1000 V test voltage; made to order. 220 V AC power supply.

Enquire about Hioki SM7810-20
Kusam Meco KM 20-10 20 MHz Analog Oscilloscope

Dual-trace 20 MHz analog oscilloscope with 6-inch CRT, 1 mV/div sensitivity, X-Y mode, TV sync separation and ≤ 17.5 ns rise time; mains powered.

Enquire about Kusam Meco KM 20-10
Lutron EP-04L Low Frequency Probe, 100 kHz to 100 MHz, for EMF-839

Low frequency probe for the EMF-839 RF field meter covering 100 kHz to 100 MHz, supplied with its own calibration card.

Enquire about Lutron EP-04L
Rishabh Master 3440i Class 0.2S Touch Screen Multifunction Meter, Class 0.2S

Rish Master 3440i class 0.2S multifunction meter with 320 x 240 colour touch screen, harmonics to 31st, RS485, relay, analog or Ethernet options.

Enquire about Rishabh Master 3440i Class 0.2S
Fluke CNX i3000 iFlex AC Wireless Current Module

Wireless AC current module with iFlex flexible probe: true-rms to 2500 A, readings sent up to 20 m to the CNX multimeter.

Enquire about Fluke CNX i3000
CIE DET-2000 0-20-2000 Digital Earth Resistance Tester 0-20-2,000 Ω, Dual Range, 4 Terminal

CIE DET-2000 handheld 4-terminal digital earth tester for earth resistance and soil resistivity, dual range 0-20-2,000 Ω, 3½ digit LCD and rechargeable Ni-Cd cells.

Enquire about CIE DET-2000 0-20-2000
Hioki SS7081-50 Battery Cell Voltage Generator

12-channel battery cell voltage generator for BMS validation, used in place of real cells: 0 to 5.025 V per channel at up to ±1 A, ±0.015% output accuracy; control PC and software not included.

Enquire about Hioki SS7081-50
Kusam Meco KM 26 Multifunction Process Calibrator

Field multifunction process calibrator, 0.01% basic accuracy, isolated measure and source channels, TC / RTD / V / mA / Ω / Hz / pulse, pressure modules, 1200-group memory, 3.2" TFT.

Enquire about Kusam Meco KM 26
Lutron EP-05H High Frequency 3-axis Probe, 50 MHz to 3 GHz, for EMF-819

Three-axis high frequency probe for the EMF-819 RF field meter, 50 MHz to 3 GHz, supplied with its own calibration card.

Enquire about Lutron EP-05H
Rishabh Master 3440i DL Touch Screen Multifunction Meter, Class 0.2S, Data Logging

Rish Master 3440i DL class 0.2S multifunction meter with 320 x 240 colour touch screen, harmonics to 31st, data logging, sag / swell / overcurrent events, RS485, relay, analog or Ethernet options.

Enquire about Rishabh Master 3440i DL
Fluke CNX t3000 Wireless Temperature Module

Wireless K-type temperature module, -200 to 1372 °C, sending readings up to 20 m to the CNX multimeter; logs 65,000 readings.

Enquire about Fluke CNX t3000
CIE DET-2000 0-200-2000 Digital Earth Resistance Tester 0-200-2,000 Ω, Dual Range, 4 Terminal

CIE DET-2000 handheld 4-terminal digital earth tester for earth resistance and soil resistivity, dual range 0-200-2,000 Ω, 3½ digit LCD and rechargeable Ni-Cd cells.

Enquire about CIE DET-2000 0-200-2000
Hioki ST4030A Impulse Winding Tester

Impulse winding tester that finds layer shorts in motor and coil windings by comparing response waveforms: 200 MHz sampling, 12-bit resolution, LC/RC quantification, 10 μH to 100 mH.

Enquire about Hioki ST4030A

Show more products