Skip to content

Test & Measuring Instruments

Portable and bench instruments for electricians, maintenance teams, test labs and quality departments: from multimeters and clamp meters to insulation, earth, power quality and environmental testers.

All products in Test & Measuring Instruments

Kusam Meco KM-5208LP Loop Impedance Tester

Earth fault loop impedance and prospective short-circuit current tester powered from the line under test: loop ranges 20 / 200 / 2000 Ω, 15 mA range that does not trip ELCBs, PSC to 4 kA, wiring check and voltmeter; no batteries; CAT III 300 V.

Enquire about Kusam Meco KM-5208LP
HTC Instruments HT-306 Humidity Meter with K-Type Thermometer

Humidity meter, 5 – 98% RH, with K-type thermocouple input to 1000 °C, dual display, max / min / relative and data hold.

Enquire about HTC Instruments HT-306
Lutron CP-200 AC Current Probe, 200 A, for DW-6093 and DW-6095

Small clamp-on AC current probe with 20 A and 200 A ranges and a 19 mm jaw for the DW-6093 and DW-6095 power analyzers; no recalibration on change.

Enquire about Lutron CP-200
Rishabh ED1101 2TS MID MID Certified 1 Phase Direct Connected Energy Meter, 45 A direct, Tariff + Pulse

MID certified (Module B and D) 1 phase direct connected DIN-rail energy meter, 1 module, 45 A direct: class B (EN 50470-3) bidirectional energy, with 1 tariff input + 1 SO pulse output.

Enquire about Rishabh ED1101 2TS MID
Fluke 378 FC Non-Contact Voltage True-rms AC/DC Clamp Meter with Power Quality Indicator

FieldSense true-rms AC/DC clamp meter with power quality indicator; voltage and current through the jaw, iFlex included.

Enquire about Fluke 378 FC
CIE CIE/666 500V 1000MΩ Insulation Tester 500 V, 1,000 MΩ, Hand Driven, Wooden Body

CIE/666 hand-cranked insulation tester (megger) testing at 500 V, scaled 0 to 1000 MΩ, in a wooden body. Runs without mains power or batteries, for site and field testing.

Enquire about CIE CIE/666 500V 1000MΩ
Hioki IR4056-21 Insulation Tester (Not CE Marked)

5-range insulation tester, 50 V/100 MΩ to 1000 V/4000 MΩ, 0.8 s PASS/FAIL response, plus AC/DC voltage and low-resistance continuity; 1 m drop-proof. Not CE marked.

Enquire about Hioki IR4056-21
Meco DVM72x144533-TRMS 5-Digit 3-Phase VAR Meter with RS485, TRMS

5-digit (99999 count) 3-phase TRMS digital VAR meter with 25.4 mm display, 3P3W / 3P4W, SMPS supply; RS485 Modbus optional.

Enquire about Meco DVM72x144533-TRMS
Kyoritsu KEW 6516BT-EV2 Multi-Function Tester with Bluetooth and EVSE Adapter Kit

Kit of the KEW 6516BT multi-function installation tester with Bluetooth and the KEW 8602 EVSE adapter, for testing installations and AC electric vehicle chargers.

Enquire about Kyoritsu KEW 6516BT-EV2
Waco WI 5005M Analogue Insulation Tester 1000 / 2500 / 5000 V, Multi Range, Motor Driven, Wooden Body

Three-voltage Waco insulation tester for 1000, 2500 and 5000 V testing (up to 50,000 MΩ), run from AC mains, in a wooden case for substations and HV equipment.

Enquire about Waco WI 5005M
Kusam Meco KM-8300-BX Infrared Temperature Transmitter, −50 to 300 °C

Compact threaded infrared temperature transmitter, −50 – 300 °C, 20:1, 4 – 20 mA output, 24 V DC, stainless steel body Φ18 × 128 mm; IP65.

Enquire about Kusam Meco KM-8300-BX
HTC Instruments IRX-63 Infrared Pyrometer with K-Type Input

Infrared pyrometer, with a K-type thermocouple input to 1370 °C. 30:1 distance-to-spot ratio, max / min / difference / average, 12-point data logger, high / low alarm.

Enquire about HTC Instruments IRX-63
Lutron CP-1200 AC Current Probe, 1200 A, for DW-6092

Clamp-on AC current probe with 20, 200 and 1200 A ranges and a 50 mm jaw, powered from the DW-6092 power analyzer; swapping probes needs no recalibration.

Enquire about Lutron CP-1200
Rishabh ED1111 MB 1 Phase Direct Connected Energy Meter, 45 A direct, M-Bus

1 phase direct connected DIN-rail energy meter, 1 module, 45 A direct: class B (EN 50470-3) bidirectional energy, with M-Bus + 1 SO pulse output.

Enquire about Rishabh ED1111 MB
Fluke 381 Remote Display True-rms AC/DC Clamp Meter with iFlex

True-rms AC/DC clamp meter with removable wireless display (up to 30 ft) and iFlex probe to 2500 A AC.

Enquire about Fluke 381
CIE CIE/666 2500V 50-50000MΩ Insulation Tester 2500 V, 50-50,000 MΩ, Hand Driven, Wooden Body

CIE/666 hand-cranked insulation tester (megger) testing at 2500 V, scaled 50 to 50000 MΩ, in a wooden body. Runs without mains power or batteries, for site and field testing.

Enquire about CIE CIE/666 2500V 50-50000MΩ
Hioki IR4057-50 Insulation Tester

5-range insulation tester, 50 V/100 MΩ to 1000 V/4000 MΩ, with digital bar graph and 0.3 s PASS/FAIL response, plus voltage and low-resistance checks. Z3210 wireless adapter sold separately.

Enquire about Hioki IR4057-50
Meco DVM72x144534-TRMS 5-Digit 3-Phase VAR Meter with RS485, TRMS

5-digit (99999 count) 3-phase TRMS digital VAR meter with 25.4 mm display, 3P3W / 3P4W, SMPS supply; RS485 Modbus optional.

Enquire about Meco DVM72x144534-TRMS
Kyoritsu KEW 8031 Digital Phase Indicator with Open Phase Check

Small digital phase indicator that shows phase sequence and open phases by LED and buzzer at the same time.

Enquire about Kyoritsu KEW 8031
Waco WI 5010HM Analogue Insulation Tester 5000 V, 1,00,000 MΩ, Hand and Motor Driven, 2 in 1, Wooden Body

Waco analogue insulation tester at 5000 V, range 1,00,000 MΩ, that can be cranked by hand or run from 220 V AC mains, in a wooden case for transformers, cables and switchgear.

Enquire about Waco WI 5010HM
Kusam Meco KM-8600-BX Infrared Temperature Transmitter, −50 to 600 °C

Compact threaded infrared temperature transmitter, −50 – 600 °C, 20:1, 4 – 20 mA output, 24 V DC, stainless steel body Φ18 × 128 mm; IP65.

Enquire about Kusam Meco KM-8600-BX
HTC Instruments IRX-64 1050 °C Infrared Pyrometer with K-Type Input

Infrared pyrometer, −50 °C to 1050 °C, with a K-type thermocouple input to 1370 °C. 30:1 distance-to-spot ratio, max / min / difference / average, 12-point data logger, high / low alarm.

Enquire about HTC Instruments IRX-64
Lutron CP-1201 AC Current Probe, 1200 A, for DW-6093 and DW-6095

Clamp-on AC current probe with 20, 200 and 1200 A ranges and a 50 mm jaw, powered from the DW-6093 or DW-6095 power analyzer through banana plugs.

Enquire about Lutron CP-1201
Rishabh ED1111 MB MID MID Certified 1 Phase Direct Connected Energy Meter, 45 A direct, M-Bus

MID certified (Module B and D) 1 phase direct connected DIN-rail energy meter, 1 module, 45 A direct: class B (EN 50470-3) bidirectional energy, with M-Bus + 1 SO pulse output.

Enquire about Rishabh ED1111 MB MID

Show more products