Test & Measuring Instruments

All products in Test & Measuring Instruments

2676 products Sort by Recommended Brand Model number Newest

• 

  Fluke 393 FC Solar Clamp Meter, CAT III 1500 V

  True-rms solar clamp meter, CAT III 1500 V, IP54: 1500 V DC, 999.9 A DC/AC, thin jaw for combiner boxes, iFlex included.

  Enquire about Fluke 393 FC
• 

  CIE CIE/666 2500V 1000MΩ Insulation Tester 2500 V, 1,000 MΩ, Hand Driven, Wooden Body

  CIE/666 hand-cranked insulation tester (megger) testing at 2500 V, scaled 0 to 1000 MΩ, in a wooden body. Runs without mains power or batteries, for site and field testing.

  Enquire about CIE CIE/666 2500V 1000MΩ
• 

  Hioki IR4057-90 Insulation Tester with Wireless Adapter

  5-range insulation tester, 50 V/100 MΩ to 1000 V/4000 MΩ, with digital bar graph and 0.3 s PASS/FAIL response, plus voltage and low-resistance checks. Bundled with the Z3210 wireless adapter for the GENNECT Cross app.

  Enquire about Hioki IR4057-90
• 

  Meco DVM96 Digital Varmeter with Built-in Transducer

  Digital panel varmeter with built-in transducer, red LED display; "-" shows export of power. Uni- or bi-directional input chosen when ordering.

  Enquire about Meco DVM96
• 

  Kyoritsu KEW 8031F Phase Sequence Indicator with Open Phase Check

  Compact, dust-sealed phase sequence checker for 3-phase supplies from 110 V to 600 V, with lamps that also show an open phase and no exposed metal parts.

  Enquire about Kyoritsu KEW 8031F
• 

  Waco WI 5010M Analogue Insulation Tester 5000 V, 1,00,000 MΩ, Motor Driven, Wooden Body

  Waco analogue insulation tester at 5000 V, range 1,00,000 MΩ, motor driven from AC mains for a steady test voltage, in a wooden case for transformers, cables and switchgear.

  Enquire about Waco WI 5010M
• 

  Kusam Meco KM-CAL-802 Thermocouple Calibrator, Source and Measure

  Thermocouple calibrator that sources and measures mV and R, S, B, E, K, J, T, N thermocouples with ±0.05% basic accuracy and reference junction compensation, °C / °F.

  Enquire about Kusam Meco KM-CAL-802
• 

  HTC Instruments IRX-65 1250 °C Infrared Pyrometer with K-Type Input

  Infrared pyrometer, −50 °C to 1250 °C, with a K-type thermocouple input to 1370 °C. 30:1 distance-to-spot ratio, max / min / difference / average, 12-point data logger, high / low alarm.

  Enquire about HTC Instruments IRX-65
• 

  Lutron CP-3000-B Flexible AC Current Probe, 3000 A, Blue

  Flexible 600 mm current loop with 30, 300 and 3000 A ranges and a 3 V AC output, for the DW-6093 and DW-6095 power analyzers; blue marking for phase identification.

  Enquire about Lutron CP-3000-B
• 

  Rishabh ED1111 Mod 1 Phase Direct Connected Energy Meter, 45 A direct, Modbus

  1 phase direct connected DIN-rail energy meter, 1 module, 45 A direct: class B (EN 50470-3) bidirectional energy, with RS485 Modbus + 1 SO pulse output.

  Enquire about Rishabh ED1111 Mod
• 

  Fluke 404E Laser Distance Meter, 40 m

  Laser distance meter, 0.2 to 40 m, area, volume and Pythagoras; IP54, 1 m drop tested.

  Enquire about Fluke 404E
• 

  CIE CIE/666 2500V 2000MΩ Insulation Tester 2500 V, 2,000 MΩ, Hand Driven, Wooden Body

  CIE/666 hand-cranked insulation tester (megger) testing at 2500 V, scaled 0 to 2000 MΩ, in a wooden body. Runs without mains power or batteries, for site and field testing.

  Enquire about CIE CIE/666 2500V 2000MΩ
• 

  Hioki IR4059 Insulation Tester

  5-range insulation tester suited to electric vehicle work: 50 V/100 MΩ to 1000 V/4000 MΩ, 0.3 s PASS/FAIL, and a test lead with remote switch and flashlight.

  Enquire about Hioki IR4059
• 

  Meco DVM144 Digital Varmeter with Built-in Transducer

  Digital panel varmeter with built-in transducer, red LED display; "-" shows export of power. Uni- or bi-directional input chosen when ordering.

  Enquire about Meco DVM144
• 

  Kyoritsu KEW 8035 Non-Contact Phase Rotation Indicator

  Phase rotation indicator that clips on to insulated cables (2.4 to 30 mm) with no metal contact, for 3-phase systems from 70 V to 1000 V AC, with rotating LEDs, tones and a magnet. CAT IV 600 V.

  Enquire about Kyoritsu KEW 8035
• 

  Waco WI 10000HM Analogue Insulation Tester 10000 V, 10,000 to 1,00,000 MΩ (any one range), Hand and Motor Driven, 2 in 1, Wooden Body

  Waco analogue insulation tester at 10000 V, range 10,000 to 1,00,000 MΩ (any one range), that can be cranked by hand or run from 220 V AC mains, in a wooden case for transformers, cables and switchgear.

  Enquire about Waco WI 10000HM
• 

  Kusam Meco KM-CAL-803 RTD Calibrator, Source and Measure

  RTD and resistance calibrator, source 0.1 – 4000 Ω and measure 0.1 – 5000 Ω, Pt100 / Pt200 / Pt500 / Pt1000 / Cu50, ±0.05% basic accuracy, 4-digit LCD.

  Enquire about Kusam Meco KM-CAL-803
• 

  HTC Instruments IRX-66 1550 °C Infrared Pyrometer with K-Type Input

  Infrared pyrometer, −50 °C to 1550 °C, with a K-type thermocouple input to 1370 °C. 30:1 distance-to-spot ratio, max / min / difference / average, 12-point data logger, high / low alarm.

  Enquire about HTC Instruments IRX-66
• 

  Lutron CP-3000-R Flexible AC Current Probe, 3000 A, Red

  Flexible 600 mm current loop with 30, 300 and 3000 A ranges and a 3 V AC output, for the DW-6093 and DW-6095 power analyzers; red marking for phase identification.

  Enquire about Lutron CP-3000-R
• 

  Rishabh ED1111 Mod MID MID Certified 1 Phase Direct Connected Energy Meter, 45 A direct, Modbus

  MID certified (Module B and D) 1 phase direct connected DIN-rail energy meter, 1 module, 45 A direct: class B (EN 50470-3) bidirectional energy, with RS485 Modbus + 1 SO pulse output.

  Enquire about Rishabh ED1111 Mod MID
• 

  Fluke 405 Laser Distance Meter, 50 m

  Laser distance meter, 0.2 to 50 m, with area, volume, Pythagoras and auto level; IP65.

  Enquire about Fluke 405
• 

  CIE CIE/666 2500V 2500MΩ Insulation Tester 2500 V, 2,500 MΩ, Hand Driven, Wooden Body

  CIE/666 hand-cranked insulation tester (megger) testing at 2500 V, scaled 0 to 2500 MΩ, in a wooden body. Runs without mains power or batteries, for site and field testing.

  Enquire about CIE CIE/666 2500V 2500MΩ
• 

  Hioki IR5051 High Voltage Insulation Tester

  High-voltage insulation tester for solar PV systems and equipment such as transformers, cables and motors: 250 V to 5000 V test voltage, up to 10 TΩ, PV insulation resistance while generating. Z3210 wireless adapter sold separately.

  Enquire about Hioki IR5051
• 

  Meco DWM72x144533-TRMS 5-Digit 3-Phase Watt Meter with RS485, TRMS

  5-digit (99999 count) 3-phase TRMS digital watt meter with 25.4 mm display, 3P3W / 3P4W, SMPS supply; RS485 Modbus optional.

  Enquire about Meco DWM72x144533-TRMS

Show more products