Masibus 5002U-P ON/OFF and Proportional Controller

Brand
Masibus
Model number
5002U-P

Masibus 5002U-P ON/OFF and proportional controller: input Ranges, output ON/OFF or proportional. For heat treatment furnaces, reheat furnaces.

Price and availability on request

Request a quote

Sent with the product details: Masibus 5002U-P ON/OFF and Proportional Controller.

A phone number or an email address is needed, so we can reply.

We use these details only to reply to your enquiry. See our privacy notice.

Key features

  • Universal Input selection
  • Premium ON/OFF or Proportional controller
  • Transmitter Power Supply
  • Fast Loop response time of 250mSec
  • Up to 4 Independent programmable relay output
  • 22 Alarm types
  • High Accuracy of 0.1% FS
  • Retransmission output (Optional)
  • RS485 port with Modbus RTU protocol (Optional)
  • Input Scalability for Linear input type
  • Output Scalability for all input type
  • Square Root Extraction for Linear input type
  • Settable Digital Filter 0-60 Sec
  • Password Protected menu to avoid unauthorized access
  • Unique one shot Calibration method

Specifications

Input
Input TypeThermocouple ( E, J, K, T, B, R, S, N,C,G) RTD (Pt 100), current, voltage
Input RangeRefer table-1
ADC Resolution17 bits
Display Resolution0.1°C / 1 count
Sampling Rate250 msec.
CJC Error±2.0 °C max.
Sensor Burnout Current0.25uA
RTD Excitation Current1mA max.
NMRR> 40dB
CMRR> 120dB
Temp-co< 100ppm/°C
Input Impedance> 1MΩ
Max Voltage20VDC
Display & Keys
Process Value0.56" Four-digit 7 segment red LED
Set Value0.4" Four-digit 7 segment green LED
Status IndicationFour Red LED's for relays, alarm, set point selection, green LEDs for communication Keys Menu, escape, shift, increment, ACK
Control Output (Field Programmable)
Output TypeON/OFF or proportional
Proportional Band0.1 to 999.9
CycleTtime1 to 250sec.
MR (Manual Reset)-50% to 50%
Hysteresis1 to 250 (on/off mode)
Relay/Alarm Output
Relays4 (Configurable for control/alarm)
Type & Rating1 Change over (C, NO, NC), 5A @ 230V AC / 30V DC
Mode Note *proportional control settProportional* or ON/OFF control (Field selectable) able for relay No.1 only.
Retransmission Output (Optional)
Number of Output1
Output Signal0/4-20mA @ 500 ohm max. 0/ 1-5VDC, 0-10 V DC @ 3 K ohms min.
Output Accuracy±0.25% of span
Communication Output (Optional)
InterfaceRS-485 (2 Wire)
ProtocolModbus-RTU
Baud Rate (bps)9600, 19200
Specifications
Transmitter Power Supply24V DC (±1V) @30 mA
Power Supply
Standard85-265V AC/110-300V DC
Optional18-36V DC
Physical
Dimension (in mm)96(H) x 96(W) x 110(D)
Panel Cut Out (in mm)92.5(H) x 92.5(W)
Weight (gms)500 (Approx.)
Enclosure MaterialMolded ABS
Enclosure ProtectionIP20
Terminal Cable Size2.5mm²
AccessoriesTwo mounting clamps, 100 Ohms Ext. Resistor
Environmental
Operating temperature0 to 55 °C
Storage temperature0 to 80 °C
Humidity20 to 95% RH Non-condensing Table 1: Display Range
Input TypeRanges
RTDPt-100 / -199.9 to 850.0 °C
Product
ApplicationsHeat treatment furnaces, Reheat furnaces, Ceramic Kilns, Glass Industry, Flow/ Pressure control, Distillation and Reactor control in Chemical plants, Water and waste water control
IndustriesPaper, Valve Manufacturer, Metal

Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.