Multispan
143 Multispan products listed. For prices and availability, send an enquiry.
Products
-
Enquire about LD-1252A-M1
LD-1252A-M1 Load Cell Controller
Weighing indicator / controller for load cell mV signals, with built-in excitation supply, a 5-digit dual display and two relays for alarms or load control. Optional retransmission and RS-485 Modbus.
-
Enquire about LPS24-10A
LPS24-10A Power Supply 24V 10A, LPS Series
DIN-rail switching power supply, 24 V DC at 10 A (240 W) for 180-270 V AC or 250-370 V DC input, with overload, over-voltage, short-circuit and over-temperature protection.
-
Enquire about LR-35
LR-35 Load Sharing Relay
DIN-rail relay that alternates two loads such as pumps, motors or generators to balance their running hours, using two potential-free switch inputs and two relays.
-
Enquire about MCS-63-860
MCS-63-860 Multi-Channel Current Scanner
DIN-rail multi-channel current scanner with eight built-in 60 A AC current inputs, a 3-digit display and RS-485 Modbus output.
-
Enquire about MDT-17U
MDT-17U Multifunction Timer, Knob Setting
Slim 17.5 mm DIN-rail multifunction timer with mode, time range and trip delay set by knobs, one changeover relay and universal 12-240 V DC / 20-240 V AC supply.
-
Enquire about MDT-17X
MDT-17X Multifunction Timer with NFC Setting
DIN-rail multifunction timer from 0.1 to 999 hours with one changeover relay and multifunction modes, set up by NFC.
-
Enquire about MDT-1310F
MDT-1310F Thumbwheel On / Off Timer
Panel on / off delay timer with a 3-digit display and time set on a thumbwheel, micro switch input, hour / minute / second ranges and power-fail memory.
-
Enquire about MFC-1058
MFC-1058 Flow Totalizer
Flow rate indicator and totalizer for pulse or analog flow meters, with built-in sensor supply, separate 8-digit total and 5-digit rate displays, up to two relays, retransmission and RS-485 Modbus.
-
Enquire about MFM-13-E5
MFM-13-E5 Multifunction Meter, 3 Line Display (MFM 13-M1)
Panel multifunction meter for single and three-phase systems with a 3-line LED display, PT primary up to 520 kV, pulse output and RS-485 Modbus.
-
Enquire about MFM-13-M1
MFM-13-M1 Multifunction Meter, 3 Line Display
Panel multifunction meter for single and three-phase systems with a 3-line LED display, PT primary up to 520 kV, pulse output and RS-485 Modbus.
-
Enquire about MFM-14DC-M1
MFM-14DC-M1 DC Multifunction Meter
DC multifunction meter for volts (-1500 to 1500 V DC), amps via a ±75 mV shunt, watts, kW and kWh, with two protection relays and RS-485 Modbus.
-
Enquire about MHC-1202
MHC-1202 Humidity Controller
Humidity controller for a humidity sensor input, with two relays for humidification and dehumidification, RS-485 Modbus and analog retransmission. 96 x 96 mm panel unit; other sizes available.
-
Enquire about MHT-1202
MHT-1202 Humidity + Temperature Controller
Combined humidity and temperature controller taking an RTD and a humidity sensor, with a 4-digit dual display, two relays for humidification / dehumidification and optional RS-485 Modbus.
-
Enquire about MI-431
MI-431 Slim Signal Isolator
Slim DIN-rail signal isolator (12.5 mm single output, 17.5 mm dual output) for mA and V signals, with built-in sensor supply and 3-way isolation between input, output and supply.
-
Enquire about MI-532P
MI-532P Signal Isolator, Temperature (RTD) Input
Slim DIN-rail isolator that converts an RTD temperature input to an isolated analog output, single or dual, with 3-way isolation. 17.5 mm wide; 100-270 V AC or 24 V DC supply.
-
Enquire about MI-632
MI-632 Signal Isolator
DIN-rail analog signal isolator with fixed input and output ranges, single or dual output and 3-way isolation between input, output and supply for clean, noise-free process signals.
-
Enquire about MMC-1046RD
MMC-1046RD Counter + RPM Meter
Panel counter with separate displays for total count and RPM from a PNP / NPN proximity sensor, with a relay on the count totalizer and auto or manual reset.
-
Enquire about MPC-1062L
MPC-1062L Programmable 2-Relay Controller with Graphic LCD
Panel controller with multi-proximity inputs, up to two relays and clutch-brake output, shown on a graphic LCD. 230 V or 110 V AC supply.
-
Enquire about MPD-1R
MPD-1R Protection Relay, Voltage and Current (MPD-1R)
True RMS protection relay with direct voltage input 20-500 V AC and CT input (primary 5 to 9999 A), user-selectable trip time, auto / manual / ZVR reset and one relay. 96 x 96 mm.
-
Enquire about MPD-152
MPD-152 Multifunction 3 Phase Protection Relay, DIN Rail
DIN-rail three-phase protection relay and VAF monitor with 3-line display of phase voltages, currents and frequency, programmable trip parameters and one relay with two changeover contacts.
-
Enquire about MPD-192
MPD-192 Multifunction 3 Phase Protection Relay, Panel Mount
Panel-mount three-phase protection relay and VAF monitor with 3-line display, programmable voltage, current, frequency, unbalance and locked-rotor trips, two relays and optional RS-485 Modbus.
-
Enquire about MPD-194
MPD-194 Motor Protection Device (MPD-194)
Panel-mount motor protection relay that is also a multifunction meter, with a 4-line display, programmable trip parameters, two relays, fail-safe option and RS-485 Modbus on request.
-
Enquire about MPD-198A
MPD-198A Motor Protection Device (MPD-198A)
Panel-mount motor protection relay and multifunction meter for 3-phase 4-wire, 3-wire or single-phase systems, with a 4-line display, programmable trips, two relays and RS-485 Modbus on request.
-
Enquire about MS-5716RU-M1
MS-5716RU-M1 16-Channel Scanner with USB Data Logging
16-channel universal-input scanner for thermocouples, RTD, mA and V, with eight alarm / trip relays that can be grouped, USB data logging and RS-485 Modbus.
