Skip to content

Lutron

556 Lutron products listed. For prices and availability, send an enquiry.

Enquire about Lutron

PST-715 Soil Thermometer, Pen Type

Pen type soil thermometer with type K probe for 0 to 70 °C with 0.1 °C resolution and data hold.

Enquire about PST-715
PTM-806 Pen Type K Thermometer with Separate Probe

Pen-size type K thermometer with 0.1 degree resolution, °C/°F selection, a reversible display and data hold; takes any standard type K probe.

Enquire about PTM-806
PTM-9957 Temperature Controller / Monitor, Thermocouple and Pt100

Panel temperature controller for type K/J/T/E/R/S thermocouples and Pt 100, with 0.1 degree resolution, control and Hi/Lo alarm relays.

Enquire about PTM-9957
PVA-6067 Apparent Power (VA) Panel Controller / Monitor

DIN 96 x 48 mm apparent power meter reading up to 6,000 VA directly or more with external CTs and PTs, with control and alarm relays.

Enquire about PVA-6067
PVB-820 Pen Type Vibration Meter

Pen type vibration meter with built-in sensor for acceleration and velocity RMS from 10 Hz to 1 kHz, in metric or imperial units.

Enquire about PVB-820
PVB-8219 Vibration Controller / Monitor

Panel vibration monitor for acceleration, velocity and displacement from 10 Hz to 1 kHz, supplied with sensor and magnetic base, with control and alarm relays.

Enquire about PVB-8219
PWA-301 Pure Water Conductivity Tester, 0 to 1999 µS

Pocket tester for drinking and pure water conductivity from 0 to 1999 µS with 1 µS resolution, ATC and carbon rod electrode.

Enquire about PWA-301
PWCB-06 Power Interface Cable

Power interface cable for supplying Lutron instruments and modules.

Enquire about PWCB-06
PWH-303 Water Hardness / Pure Water Meter

Meter for water conductivity (0 to 1999 µS) and hardness (0 to 1000 ppm) with a separate platinum glass electrode for pure water.

Enquire about PWH-303
PX-01 Inductive Proximity Sensor, 4 mm, NPN

Inductive proximity sensor with 4 mm sensing distance and 600 Hz response, 3-wire NPN normally open, 10 to 30 V DC, IP67, for RPM pick-up.

Enquire about PX-01
PX-02 Miniature Proximity Sensor, 1.5 mm, PNP

Miniature 6.4 mm diameter proximity sensor with 1.5 mm sensing distance and PNP normally open output, 10 to 55 V DC.

Enquire about PX-02
RBOX-408 Resistance Decade Box, 1 Ω Steps

Resistance decade box from 1 Ω to 11,111,110 Ω in 1 Ω steps, with 1 % resistors rated 1 W, for calibration and circuit work.

Enquire about RBOX-408
RCB-110V RCCB Checker, 100 to 120 V

Plug-in checker for socket wiring and RCCB tripping at 10, 30, 100, 300 and 500 mA on 100 to 120 V mains, powered from the socket.

Enquire about RCB-110V
RCB-220V RCCB Checker, 200 to 240 V

Plug-in checker for socket wiring, phase detection and RCCB tripping at 10, 30, 100, 300 and 500 mA on 200 to 240 V mains.

Enquire about RCB-220V
RHW-925 Humidity / Temperature to WiFi Converter

WiFi humidity and temperature transmitter showing humidity, temperature, wet bulb and dew point, sending data to phones or networks in AP or client mode.

Enquire about RHW-925
RSC-801 8-to-1 RS232 Converter

Converter that combines the RS232 outputs of up to 8 Lutron meters into one RS232 port, for multi-meter logging with SW-U801 or SW-808 software.

Enquire about RSC-801
RSW-914 Direct WiFi Converter for Lutron RS232 Meters

Converter that shares the readings of one Lutron RS232 meter (up to 12 channels) over WiFi to phone or tablet apps, with no setup needed.

Enquire about RSW-914
RT-606 3 Phase Rotation Tester

Phase sequence tester for three-phase supplies from 100 to 660 V AC, 45 to 70 Hz, that shows the rotation direction.

Enquire about RT-606
RT-608 3 Phase and Motor Rotation Tester

Two-in-one tester that checks the phase sequence of 100 to 660 V AC supplies and the rotating field direction of motors before connection.

Enquire about RT-608
RT-616 3 Phase Rotation Tester, LCD

Electronic three-phase rotation tester with LCD for 100 to 660 V AC supplies, without moving parts for reliable phase sequence checks.

Enquire about RT-616
SB-01 Wind Shield Ball for Sound Level Meters

Foam wind shield ball that fits over a sound level meter microphone to reduce wind noise outdoors.

Enquire about SB-01
SC-934 Multi-frequency Sound Level Calibrator

Sound calibrator with 125, 250, 500 and 1000 Hz outputs at 94, 104 and 114 dB, for checking sound level meters across frequency and level.

Enquire about SC-934
SC-941 Sound Calibrator, 94 dB / 1 kHz

Sound calibrator giving 94 dB at 1000 Hz for 0.5 and 1 inch microphones, to IEC 942 class 2, for checking sound level meters in the field.

Enquire about SC-941
SC-942 Sound Calibrator, 94 dB and 114 dB

Sound calibrator with 94 dB and 114 dB outputs at 1000 Hz, for 0.5 and 1 inch sound level meter microphones.

Enquire about SC-942

Show more products