Lutron PTM-9957 Temperature Controller / Monitor, Thermocouple and Pt100

Panel temperature controller for type K/J/T/E/R/S thermocouples and Pt 100, with 0.1 degree resolution, control and Hi/Lo alarm relays.

Price and availability on request

Thermocouple Temp. sensor: type K/J/T/E/R/S.
Pt Temp. sensor: Pt 100 ohm.
Type K range: -100 to 1300 °C, °C/°F. Type J range: -100 to 1150 °C, °C/°F. Type T range: -100 to 400 °C, °C/°F. Type E range: -100 to 900 °C, °C/°F. Type R range: 0 to 1700 °C, °C/°F. Type S range: 0 to 1500 °C, °C/°F.
Pt 100 ohm range: -199 to 850 °C, °C/°F.
Resolution: 0.1 degree (< 1000 degree) 1 degree (≧1000 degree)
Control setting, Hi/Lo alarm setting.
Control relay output, alarm relay output.
Control Relay will make action when the reading value reach to control value.
Alarm Relay will make action when the reading value reach to high/low alarm value.
Hysteresis value setting for control and alarm function.
PoMicroprocessor circuit ensures high accuracy and provides special functions and features.
Power: 90 ACV to 264 ACV, 50/60 Hz.
RS-232/USB computer interface.
DIN size: 96 x 48 mm. Depth: 107 mm.
Optional type K probe: TP-01, TP-02A, TP-03, TP-04, TP-05.
Optional Pt 100 ohm probe: TP-100B.
Optional USB cable, USB-01.
Optional date acquisition software,SW-U801-WIN.

Specifications
Circuit	Custom chip of microprocessor LSI circuit.
Display	4 digits red LED, digit size : 14 mm.
Measurement	Pt 100 ohm range : -199 to 850 °C, °C/°F.; Type K range : -100 to 1300 °C, °C/°F.; Type J range : -100 to 1150 °C, °C/°F.; Type T range : -100 to 400 °C, °C/ °F.; Type E range : -100 to 900 °C, °C/°F.; Type R range : 0 to 1700 °C, °C/°F.; Type S range : 0 to 1500 °C, °C/°F.
Update Time of Display	Approx. 1 second.
Data Output	RS 232 PC serial interface.
Operating temperature	0 to 50°C.
Operating humidity	Less than 80% R.H.
Power Supply	90 to 260 ACV, 50/60 Hz.
Power Consumption	Approx. 3.3 VA/AC 110V.; Approx. 5.5 VA/AC 220V.
Weight	384 g/ 0.84 LB.
Dimension	DIN size : 96 x 48 mm; Depth : 110 mm.
Setting value	1st layer setting procedures: CtLo ( Control low limit ); CtHi ( Control high limit ); ALLo ( Alarm low limit ); ALHi ( Alarm high limit ); Second layer setting procedures: tyPE ( Sensor type ); dEG ( °C/°F ); FiLt ( Digital filter ); CtHy ( Control hysteresis set ); ALHy ( Alarm hysteresis set ); oFSt ( Offset adjustment ); GAin ( Gain adjustment )
Relay outputs	Number : 2 relays; Function : Relay 1 : Unit 1 control relay.; Relay 2 : High/Low alarm relay.; Max load : 0.5 ACA/250 ACV; 0.5 DCA/24 DCV; * Do not apply the relay contact load current > 0.5 A, other wise the relay may be damaged permanently without warranty.

Accessories
Supplied with	* Instruction manual : 1 PC; * Case holder with screw : 2 PCs
Optional	Type K Temp. probe : TP-01, TP-02A, TP-03, TP-04, TP-05; Pt 100 ohm Temp. probe : TP-100B.; * Data Acquisition software; SW-U801-WIN.; * RS232 cable, UPCB-02.; * USB cable, USB-01.; * Real time SD card datalogger; DL-9602SD; * GSM controller, GSM-889.; * Interface cable ( cable between meter to GSM-889 ), GMCB-89.

Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.