Skip to content

Lutron

556 Lutron products listed. For prices and availability, send an enquiry.

Enquire about Lutron

OXPB-11 Dissolved Oxygen Probe, 4-pin DIN

Replacement dissolved oxygen probe with a 4-pin DIN plug and 4 m cable for the DO-5510, DO-5519, DO-5512SD, PDO-520 and YK-22DOA meters.

Enquire about OXPB-11
OXPB-22 Dissolved Oxygen Probe for YK-22DO

Standard dissolved oxygen probe for the YK-22DO meter, with a 4 m cable.

Enquire about OXPB-22
PAA-6069 AC Current Panel Controller / Monitor, True RMS

DIN 96 x 48 mm true RMS AC current meter for 0.05 to 10 A direct or up to 2000 A with external CT, with control and alarm relays.

Enquire about PAA-6069
PAM-9212SD Pitot Tube Anemometer and Manometer, SD Logger

Pitot tube anemometer for high air velocities from 4.1 to 100.0 m/s, doubling as a ±200 mbar differential manometer with 10 pressure units and SD card logging.

Enquire about PAM-9212SD
PAV-6068 AC Voltage Panel Controller / Monitor, True RMS

DIN 96 x 48 mm true RMS AC voltage meter for 1.0 to 600.0 V direct or higher with external PT, with control and alarm relays.

Enquire about PAV-6068
PB-21 Direct Probe with BNC Connector and Alligator Clips

Direct probe cable with a BNC connector and a pair of alligator clips, an optional accessory for Lutron frequency counters.

Enquire about PB-21
PC-6011SD Clamp Power Analyzer, 2000 A, Micro SD Logger

Clamp power analyzer for single-phase or balanced three-phase systems: true RMS voltage and current to 2000 A, kW, kVA, kVAR, PF and energy, logged to micro SD.

Enquire about PC-6011SD
PCD-431 Pen Type Conductivity / TDS Meter

All-in-one pen conductivity meter with 2,000 µS and 20.00 mS ranges or TDS, carbon rod electrode and built-in temperature compensation.

Enquire about PCD-431
PCD-432 Pen Type Conductivity / TDS Meter, Separate Electrode

Pen conductivity meter with a separate carbon rod electrode, 2,000 µS and 20.00 mS ranges or TDS, and automatic temperature compensation.

Enquire about PCD-432
PCD-433 Pen Type Conductivity / TDS / Salt Meter, IP67

Waterproof IP67 pen meter for conductivity (2 µS to 20 mS), TDS and salt (0 to 12 %) with auto range, ATC and data hold.

Enquire about PCD-433
PCO-350 Pen Type Carbon Monoxide (CO) Meter

Pen type CO meter with an electrochemical sensor reading 0 to 1,000 ppm, plus temperature, with a CO alarm and data hold.

Enquire about PCO-350
PDA-6071 DC Current Panel Controller / Monitor

DIN 96 x 48 mm DC current meter with jumper-selected ranges from 200 µA, fused inputs and high/low control relays.

Enquire about PDA-6071
PDO-519 Pen Type Dissolved Oxygen Meter, IP67

All-in-one pen dissolved oxygen meter for 0 to 20.0 mg/L with polarographic probe, ATC, max/min recall and IP67 protection.

Enquire about PDO-519
PDO-520 Pen Type Dissolved Oxygen Meter with Separate Probe

Pen dissolved oxygen meter with a separate polarographic probe on a 4 m cable, auto calibration, ATC and IP65 protection.

Enquire about PDO-520
PDT-2250 RPM Controller / Monitor

Panel tachometer and controller for 10 to 99,999 RPM, m/min or ft/min, with control and alarm relays and adjustable pulses per round.

Enquire about PDT-2250
PDV-6070 DC Voltage Panel Controller / Monitor

DIN 96 x 48 mm DC voltage meter with jumper-selected ranges from 200 mV, 10 MΩ input and high/low control relays.

Enquire about PDV-6070
PE-03 pH Electrode, Combination Type, BNC

Combination pH electrode for pH 1 to 13, 12.3 mm diameter and 160 mm long, for Lutron pH meters with a BNC input.

Enquire about PE-03
PE-03K7 pH Electrode and ATC Temperature Probe Kit

Kit of a pH electrode (pH 1 to 13) and an ATC temperature probe for the PH-207, PH-208, PH-221, PH-230SD and multi-parameter water meters.

Enquire about PE-03K7
PE-06HDA Spear Tip pH Electrode for Meat and Cheese

Spear tip pH electrode with a durable glass spear in a rugged epoxy body, for piercing samples such as meat, sausage and cheese; pH 1 to 13.

Enquire about PE-06HDA
PE-11 pH Electrode, Slim 10 mm

Slim combination pH electrode, 10 mm diameter and 130 mm long, measuring pH 1 to 13 (typically 0 to 14).

Enquire about PE-11
PE-12 pH Electrode for Pen pH Meters PH-222 and PH-223

Replacement combination electrode with built-in temperature sensor for the PH-222 and PH-223 pen pH meters, pH 1 to 13, 5 to 60 °C.

Enquire about PE-12
PE-21 Industrial In-line pH Electrode

Heavy duty in-line pH electrode for continuous monitoring in plants and labs: pH 0 to 14, up to 95 °C, 3/4" NPT thread and 5 m cable.

Enquire about PE-21
PH-04 pH 4.00 Buffer Solution

Standard pH 4.00 buffer solution for calibrating pH meters and electrodes.

Enquire about PH-04
PH-04A pH 4.00 Buffer Solution for Pen pH Meters

Standard pH 4.00 buffer solution packed for the PH-222 and PH-223 pen pH meters.

Enquire about PH-04A

Show more products