54, Ezra Street , Kolkata - 700001 , West Bengal, IndiaMonday to Saturday, 10:30 am to 6:30 pm

Industrial Supply Syndicate Kolkata, since 1977 Send an enquiry
Lutron PC-6011SD Clamp Power Analyzer, 2000 A, Micro SD Logger

Lutron PC-6011SD Clamp Power Analyzer, 2000 A, Micro SD Logger

Brand
Lutron
Model number
PC-6011SD

Clamp power analyzer for single-phase or balanced three-phase systems: true RMS voltage and current to 2000 A, kW, kVA, kVAR, PF and energy, logged to micro SD.

Price and availability on request

Request a quote

Sent with the product details: Lutron PC-6011SD Clamp Power Analyzer, 2000 A, Micro SD Logger.

A phone number or an email address is needed, so we can reply.

We use these details only to reply to your enquiry. See our privacy notice.

Key features

  • Power quality analyzer for single-phase or balanced three-phasesystem.
  • Voltage and Current are the True RMS value.
  • ACV input impedance is 10 Mega ohms.
  • True Power (KW、MW、GW) measurement.
  • Apparent Power (KVA、MVA、GVA) measurement.
  • Reactive Power (KVAR、MVAR、GVAR) measurement.
  • Power Factory (PF)、Phase Angle (Φ) measurement.
  • Energy (KWh、KVAh、KVARh、PFh) measurement.
  • Voltage measurement range: 10 to 600 ACV.
  • Current measurement range: 5 to 2000 ACA.
  • Graphic Phasor Diagram.
  • Voltage and Current harmonic analysis (1-50th order).
  • Voltage and Current Total Harmonic Distortion analysis (THD) measurement.
  • Voltage and Current waveforms show.
  • Peak-to-Peak voltage and current measurement.
  • Capture Transient events (including Dip, Swell and Outage) with programmable threshold (%).
  • Thermocouple Temp. sensor:Type K (-100.0°C to 199.9°C/200°C to 1300°C),°C/°F.
  • Programmable PT ratio (1 to 1000).
  • Safety Standard: IEC 1010, CAT IV 600V.
  • Built-in clock and Calendar, real time data record with SD memory card, sampling time set from 2 to 7200 seconds. Just slot in the SD card into the computer, it can down load the all the measured value with the time information (year, month, data, hour, minute, second) to the Excel directly, then user can make the further data analysis by themselves.
  • Allow save the LCD screen picture to the photo BMP file, it is the useful tool for the user to make the further analysis.
  • Micro SD CARD 32 GB maximum supported capacity.
  • Powered by AA (UM-3) DC 1.5 V X 2 batteries (Alkaline type) or DC 9V adapter (linear 110V/220V).
  • Computer data output, can cooperate with optional USB Cable/USB-01, RS232 cable/UPCB-02 and Data Acquisition software, SW-U811-WIN.
  • Optional type K probe: TP-11.

Specifications

Specifications
CircuitCustom single-chip microprocessor LSI circuit
DisplayLCD Size: 3.2 X 2.4" (60 X 44.4 mm); Dot Matrix backlit LCD (128 X 64 pixels)
MeasurementsACV; ACA; KW / KVA/ KVAR/ PF; KWH/KVAH/KVARH/PFH; Power factor; Phase angle; Frequency; Harmonics display; Temperature
Voltage ranges10 ACV to 600 ACV (Auto Range)
Current ranges5 ACA to 2000 ACA (Auto Range)
Safety standardIEC1010 CAT IV 600 V
ACV input impedance10 M ohms
Clamp frequency response40 Hz to 1 KHz
Over-load protectionACV : 720 ACV RMS; ACA : 2100 ACA with clamp probe
Over-range* LCD display show " OL ".; * The data save into the SD card will show " 9999 " or " 999 " (overleap the decimal point).
Data HoldFreezes displayed reading
Data RecordingMicro SD memory card
Data logger* Real time data logger, saved the data into SD memory card and down load the all the measured value with the time information; ( year/month/data/hour/minute/second ) down load to the Excel.; * Sampling time for data logger : 2 seconds to 7200 seconds, the during of setting step are 2 seconds; * Data error no. : ≤ 0.1% no. of total saved data typically.
Display sampling timeApprox. 1 second
Data Output* Computer interface; * Connect the optional USB cable USB-01 will get the USB plug.; * Connect the optional RS232 cable UPCB-02 will get the RS232 plug.
Operating Temperature0 to 50°C ( 32 to 122°F ).
Operating Humidity80% Relative Humidity max.
Power Supply* DC 1.5V, AA ( UM-3 ) Battery X 2 PCs (Alkaline or heavy-duty battery).; * AC to DC 9V power adapter ( LINEAR 110/220V )
Power Consumption60 mA DC
Max. Conductor SizeClamp can accommodate up to 2.2" (57 mm) diameter
Dimensions11.0 X 4.2 X 1.9" (280 X 106 X 47mm); Clamp Jaw: 3.5" (90 mm)
Accessories
Supplied withInstruction manual : 1 PC; 8 GB micro SD card : 1 PC; Test Leads : 1 set; Alligator clips : 1 set; AC to DC 9V adapter; ( linear 110V/220V ) : 1 PC; Carrying case : 1 PC
Voltage Measurement
Accuracy± (0.5% + 3d)
Current Measurement
Resolution0.01 A (up to 100 A), 0.1 A (100 A to <1000 A), 1 A (>1000 A)
Accuracy< 100 A: ± (1% + 0.5 A); 100 A to < 1000 A: ± (1% + 5 A); > 1000 A: ± (5% + 5 A)

Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.

Related products