Phoenix Contact UNO2-PS/1AC/24DC/240W UNO2-PS/1AC/24DC/240W Power Supply

Model number
UNO2-PS/1AC/24DC/240W

Primary-switched power supply unit UNO POWER, Screw connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 10 A, adjustable from 24 V DC ... 28 V DC

Price and availability on request

We reply by email or phone, Monday to Saturday, 10:30 am to 6:30 pm.

Several models? Add each to your enquiry list and send them as one enquiry.

Request a quote

Sent with the product details: Phoenix Contact UNO2-PS/1AC/24DC/240W UNO2-PS/1AC/24DC/240W Power Supply.

A phone number or an email address is needed, so we can reply.

We use these details only to reply to your enquiry. See our privacy notice.

Key features

  • Output 24 V DC, 10 A (240 W)
  • Input 100 V AC ... 240 V AC
  • Efficiency typ. 92 % (120 V AC)
  • Width 45 mm
  • Operating temperature -25 °C ... 70 °C (> 55 °C Derating - 2.5 %/K)
  • Degree of protection IP20

Specifications

Input data - AC operation
Supply system configurationStar network (TN, TT, IT (PE))
Nominal input voltage range100 V AC ... 240 V AC
Input voltage range100 V AC ... 240 V AC -15 % ... +10 %
Derating< 90 V AC (1 %/V)
Typical national grid voltage120 V AC; 230 V AC
Voltage type of supply voltageAC
Inrush currenttyp. 10 A (at 25 °C)
Inrush current integral (I2t)< 0.2 A2s
Frequency range (fN)50 Hz ... 60 Hz ±10 %
Mains buffering timetyp. 16 ms (120 V AC); typ. 20 ms (230 V AC)
Current consumption2.6 A (100 V AC); 2.2 A (120 V AC); 1.13 A (230 V AC); 1.2 A (240 V AC)
Protective circuitTransient surge protection; Varistor, gas-filled surge arrester
Switch-on timetyp. 400 ms
Device mains fuse5 A internal (device protection), fast-blow
Recommended breaker for input protection6 A ... 20 A (Characteristic B, C, D, K or comparable)
Discharge current to PE< 3.5 mA
Output data
Efficiencytyp. 92 % (120 V AC); typ. 94 % (230 V AC)
Nominal output voltage24 V DC
Setting range of the output voltage (USet)24 V DC ... 28 V DC (> 24 V DC, constant capacity restricted)
Nominal output current (IN)10 A
Short-circuit-proofyes
No-load proofyes
Crest factortyp. 1.65 (120 V AC); typ. 1.63 (230 V AC)
Output power (PN)240 W
Connection in parallelyes, for redundancy
Connection in seriesyes, for increased output voltage
Feedback voltage resistance≤ 35 V DC
Protection against overvoltage at the output (OVP)≤ 35 V DC
Residual rippletyp. 50 mVPP (with nominal values)
Control deviation< 1 % (change in load, static 10 % ... 90 %); < 3 % (change in load, dynamic 10 % ... 90 %); < 0.1 % (change in input voltage ±10 %)
Rise time< 1 s (UOut = 10 % ... 90 %)
Minimum no-load power dissipation< 4 W (120 V AC)
Maximum no-load power dissipation< 4 W (230 V AC)
Minimum nominal load power dissipation< 21 W (120 V AC)
Power loss nominal load max.< 16 W (230 V AC)
Integrated fuse protectionno
Fuse protection (secondary side)electronic
Connection data - Input
Position1.x
Identification1.1 (), 1.2 (L), 1.3 (N)
Connection data - Conductor connection
Connection methodScrew connection
rigid0.2 mm² ... 2.5 mm²
flexible0.2 mm² ... 2.5 mm²
flexible with ferrule without plastic sleeve0.25 mm² ... 2.5 mm²
flexible with ferrule with plastic sleeve0.25 mm² ... 2.5 mm²
AWG24 ... 14 (Cu)
Stripping length6.5 mm
Tightening torque (EU)0.5 Nm ... 0.6 Nm
Tightening torque ()4 lbf-in. ... 5 lbf-in.
Drive form screw headSlotted L
Screwdriver blade0.6 x 3.5 mm
rigid (AWG)24 ... 14 (Cu)
Connection data - Output
Position2.x
Identification2.1, 2.2 (+), 2.3, 2.4 (-)
Connection data - Signal
Position3.x
Identification3.1 (13), 3.2 (14)
Signaling - LED signaling
Types of signalingLED DC OK - signal state operation (UN = 24 V DC, IOut = IN)
FunctionVisual operating state display
Colorgreen
LED offSupply voltage input AC not present (Off)
LED on (green), DC OKUOUT > 0,9 x UN (On (green), DC OK)
LED on (flashing green) DC OK < 0.9 x UNUOUT < 0,9 x UN (on (flashing green))
Signaling - Signal output Relay 13/14
Position3.x
Type of signalingDC OK switch contact - signal state operation (UN = 24 V DC, IOut = IN)
Position marking3.1 (13), 3.2 (14)
FunctionOperating state forwarding
Switch contact (floating)OptoMOS
Switching voltagemax. 30 V AC/DC; max. 60 V DC
Current carrying capacitymax. 50 mA
State condition (Contact closed)UOUT > 0,9 x UN (Contact closed)
State condition (Contact open)UOUT < 0,9 x UN (Contact open)
Electrical properties
Number of phases1
Insulation voltage input/output4 kV AC (type test); 3 kV AC (routine test)
Insulation voltage input / PE3.5 kV AC (type test); 2.4 kV AC (routine test)
Product properties
Product typePower supply
Product familyUNO POWER
MTBF (IEC 61709, SN 29500)> 1219000 h (25 °C); > 678000 h (40 °C); > 366000 h (55 °C)
Environmental protection directiveRoHS Directive 2011/65/EU; WEEE; Reach
Product properties - Insulation characteristics
Protection classI
Overvoltage category (EN 61010-1)II (≤ 3000 m)
Overvoltage category (EN 62477-1)III (≤ 3000 m)
Degree of pollution2
Dimensions - Item dimensions
Width45 mm
Height130 mm
Depth129 mm
Depth (Device depth (DIN rail mounting))125 mm (Device depth (DIN rail mounting))
Dimensions - Installation dimensions
Installation distance right/left (active, passive)0 mm / 0 mm
Installation distance top/bottom (active, passive)30 mm / 30 mm
Mounting
Mounting typeDIN rail mounting
Assembly notealignable - 0 mm horizontally, 30 mm vertically
Mounting positionhorizontal DIN rail NS 35, EN 60715
With protective coatingno
Material specifications
Flammability rating according to UL 94V0 (Housing, terminal blocks)
Housing materialMetal; Aluminum (AlMg3) / sheet steel, zinc-plated
Hood versionStainless steel
Side element versionAluminum
Foot latch materialSheet steel, zinc-plated
Environmental and real-life conditions - Ambient conditions
Degree of protectionIP20
Ambient temperature (operation)-25 °C ... 70 °C (> 55 °C Derating - 2.5 %/K)
Ambient temperature (storage/transport)-40 °C ... 85 °C
Ambient temperature (start-up type tested)-40 °C
Maximum altitude≤ 3000 m (> 2000 m, Derating - 10 %/1000 m)
Climatic class3K22 (in accordance with EN 60721)
Max. permissible relative humidity (operation)≤ 95 % (at 25 °C, non-condensing)
Shock (operation)18 ms, 30g, per spatial direction (IEC 60068-2-27)
Vibration (operation)10 Hz ... 50 Hz, amplitude ±0.2 mm (IEC 60068-2-6); 50 Hz ... 150 Hz, 2.3g, 90 min.
Temp codeT4 (-25°C ... +70°C; >55°C, derating - 2.5 %/K)
Standards and regulations - Safety of power supply units up to 1100 V (insulatio
Standard designationSafety of power supply units up to 1100 V (insulation distances)
Standards/specificationsDIN EN 61558-2-16
Standards and regulations - Electrical safety
Standard designationElectrical safety
Standards/specificationsIEC 61010-2-201 (SELV)
Standards and regulations - Safety for measurement, control, and laboratory equi
Standard designationSafety for equipment for measurement, control, and laboratory use
Standards/specificationsIEC 61010-1
Standards and regulations - Protective extra-low voltage
Standard designationProtective extra-low voltage
Standards/specificationsIEC 61010-1 (SELV); IEC 61010-2-201 (PELV)
Standards and regulations - Safe isolation
Standard designationSafe isolation
Standards/specificationsIEC 61558-2-16; IEC 61010-2-201
Standards and regulations - Limitation of harmonic line currents
Standard designationLimitation of harmonic line currents
Standards/specificationsEN 61000-3-2
Standards and regulations - Mains voltage dips
Standard designationRequirement of the semiconductor industry with regard to mains voltage dips
Standards/specificationsSEMI F47 - 0706 (180 V AC)
Approvals - UL
IdentificationUL/C-UL Listed UL 61010-1; UL/C-UL Listed UL 61010-2-201; UL/C-UL Listed ANSI/UL 121201 Class I, Division 2, Groups A, B, C, D (Hazardous Location)
Approvals - SIQ
IdentificationCB scheme (IEC 61010-1, IEC 61010-2-201)

Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering. Brand names, logos and model names are trademarks of their respective owners, used only to identify the product. Details

Model numbers in this series (1)

Send us the complete code you need and we will quote it.

  • 1096432

About the UNO2-PS/1AC/24DC/240W

UNO POWER compact power supply for DIN-rail mounting, for price-oriented applications. Primary-switched power supply unit UNO POWER, Screw connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 10 A, adjustable from 24 V DC ... 28 V DC Order no. 1096432.