Phoenix Contact QUINT-PS/3AC/24DC/20/CO QUINT-PS/3AC/24DC/20/CO Power Supply, with Protective Coating

Model number
QUINT-PS/3AC/24DC/20/CO

Please use the following item for new projects: 1343940 QUINT4-PS/3AC/24DC/20/CO. Primary-switched power supply unit QUINT POWER, Screw connection, SFB Technology (Selective Fuse Breaking), input: 3-phase, output: 24 V DC / 20 A, adjustable from 18…

Price and availability on request

We reply by email or phone, Monday to Saturday, 10:30 am to 6:30 pm.

Several models? Add each to your enquiry list and send them as one enquiry.

Request a quote

Sent with the product details: Phoenix Contact QUINT-PS/3AC/24DC/20/CO QUINT-PS/3AC/24DC/20/CO Power Supply, with Protective Coating.

A phone number or an email address is needed, so we can reply.

We use these details only to reply to your enquiry. See our privacy notice.

Key features

  • Output 24 V DC ±1 %, 20 A (-25 °C ... 60 °C, UOUT = 24 V DC)
  • Input 3x 400 V AC ... 500 V AC
  • Efficiency > 93 % (at 400 V AC and nominal values)
  • Width 69 mm
  • Operating temperature -40 °C ... 70 °C (> 60 °C Derating - 2,5 %/K)
  • Degree of protection IP20

Specifications

Input data - AC operation
Nominal input voltage range3x 400 V AC ... 500 V AC
Input voltage range3x 320 V AC ... 575 V AC; 2x 360 V AC ... 575 V AC; 450 V DC ... 800 V DC
Voltage type of supply voltageAC
Inrush current< 20 A (typical)
Inrush current integral (I2t)< 3.2 A2s
AC frequency range45 Hz ... 65 Hz
Frequency range DC0 Hz
Mains buffering timetyp. 28 ms (400 V AC); typ. 43 ms (500 V AC)
Current consumption3x 1.6 A (400 V AC); 3x 1.3 A (500 V AC); 0.9 A (600 V DC)
Nominal power consumption783 VA
Protective circuitTransient surge protection; Varistor, gas-filled surge arrester
Typical response time< 0.16 s
Permissible backup fuseB6 B10 B16
Permissible DC backup fuseDC - Connect a suitable fuse upstream
Recommended breaker for input protection6 A ... 16 A (AC - Characteristics B, C, D, K)
Discharge current to PE< 3.5 mA
Output data
Efficiency> 93 % (at 400 V AC and nominal values)
Nominal output voltage24 V DC ±1 %
Setting range of the output voltage (USet)18 V DC ... 29.5 V DC (> 24 V DC, constant capacity restricted)
Nominal output current (IN)20 A (-25 °C ... 60 °C, UOUT = 24 V DC)
POWER BOOST (IBoost)26 A (-25 °C ... 40 °C permanent, UOUT = 24 V DC )
Selective Fuse Breaking (ISFB)120 A (12 ms)
Magnetic circuit breaker trippingB2 / B4 / B6 / B10 / B16 / C2 / C4 / C6
Derating60 °C ... 70 °C (2.5 %/K)
Feedback voltage resistancemax. 32 V DC
Protection against overvoltage at the output (OVP)< 32 V DC
Control deviation< 1 % (change in load, static 10 % ... 90 %); < 3 % (change in load, dynamic 10 % ... 90 %); < 0.1 % (change in input voltage ±10 %)
Residual ripple< 40 mVPP (with nominal values)
Output power480 W
Peak switching voltages nominal load< 40 mVPP (at nominal values, 20 MHz)
Maximum no-load power dissipation11 W
Power loss nominal load max.40 W
Rise time< 0.05 s (UOUT (10 % ... 90 %))
Connection in parallelyes, for redundancy and increased capacity
Connection in seriesyes
Fuse protection (secondary side)electronic; thermal-magnetic; thermal
Output data - Signal - DC OK active
Output descriptionUOUT > 0.9 x UN - High signal
Switching voltage range18 V ... 24 V
Output voltage+ 24 V DC
Maximum inrush current≤ 20 mA (short-circuit-proof)
Continuous load current≤ 20 mA
Output data - Signal - DC OK floating
Output descriptionRelay contact, UOUT > 0.9 x UN - Contact closed
Maximum switching voltage30 V AC/DC; 24 V DC
Maximum inrush current0.5 A; 1 A
Continuous load current≤ 1 A
Output data - Signal - POWER BOOST, active
Output descriptionIOUT < IN - High signal
Switching voltage range18 V ... 24 V
Output voltage+ 24 V DC
Maximum inrush current≤ 20 mA (short-circuit-proof)
Continuous load current≤ 20 mA
Connection data - Input
Connection methodScrew connection
Conductor cross-section, rigid min.0.2 mm²
Conductor cross-section, rigid max.6 mm²
Conductor cross-section flexible min.0.2 mm²
Conductor cross-section flexible max.4 mm²
Conductor cross-section AWG min.18
Conductor cross-section AWG max.10
Stripping length7 mm
Screw threadM4
Tightening torque, min0.5 Nm
Tightening torque max0.6 Nm
Connection data - Output
Connection methodScrew connection
Conductor cross-section, rigid min.0.2 mm²
Conductor cross-section, rigid max.6 mm²
Conductor cross-section flexible min.0.2 mm²
Conductor cross-section flexible max.4 mm²
Conductor cross-section AWG min.12
Conductor cross-section AWG max.10
Stripping length7 mm
Screw threadM4
Tightening torque, min0.5 Nm
Tightening torque max0.6 Nm
Connection data - Signal
Conductor cross-section, rigid min.0.2 mm²
Conductor cross-section, rigid max.6 mm²
Conductor cross-section flexible min.0.2 mm²
Conductor cross-section flexible max.4 mm²
Conductor cross-section AWG min.18
Conductor cross-section AWG max.10
Screw threadM4
Tightening torque, min0.5 Nm
Tightening torque max0.6 Nm
Signaling
Types of signalingLED; Active switching output; Relay contact
Signaling - Signal output - DC OK active
Status displayUOUT > 0.9 x UN - "DC OK" LED green
Note on status displayUOUT < 0.9 x UN - Flashing "DC OK" LED; LED flashing
Colorgreen
Signaling - Signal output - DC OK floating
Status displayUOUT > 0.9 x UN - "DC OK" LED green
Note on status displayUOUT < 0.9 x UN - Flashing "DC OK" LED; LED flashing
Colorgreen
Signaling - Signal output - POWER BOOST, active
Status displayIOUT > IN - LED "BOOST" yellow
Coloryellow
Electrical properties
Number of phases3
Insulation voltage input/output4 kV AC (type test); 2 kV AC (routine test)
Insulation voltage output / PE500 V DC (routine test)
Insulation voltage input / PE3.5 kV AC (type test); 2 kV AC (routine test)
Product properties
Product typePower supply
Product familyQUINT POWER
MTBF (IEC 61709, SN 29500)> 900000 h (25 °C); > 534000 h (40 °C)
Product properties - Insulation characteristics
Protection classI
Overvoltage category (EN 62477-1)III
Degree of pollution2
Dimensions
Width69 mm
Height130 mm
Depth125 mm
Dimensions - Installation dimensions
Installation distance right/left5 mm / 5 mm
Installation distance top/bottom50 mm / 50 mm
Dimensions - Alternative assembly
Width125 mm
Height130 mm
Depth72 mm
Mounting
Assembly notealignable - PN ≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm verticallyalignable - PN <50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom
Mounting positionhorizontal DIN rail NS 35, EN 60715
With protective coatingyes
Material specifications
Housing materialMetal; Steel sheet, zinc-plated
Type of housingSteel sheet, zinc-plated
Environmental and real-life conditions - Ambient conditions
Degree of protectionIP20
Ambient temperature (operation)-40 °C ... 70 °C (> 60 °C Derating - 2,5 %/K)
Ambient temperature (storage/transport)-40 °C ... 85 °C
Ambient temperature (start-up type tested)-40 °C
Maximum altitude5000 m
Climatic class3K3 (in acc. with EN 60721)
Max. permissible relative humidity (operation)100 % (at 25 °C, non-condensing)
Shock18 ms, 30g, in each space direction (according to IEC 60068-2-27)
Vibration (operation)< 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6); 15 Hz ... 150 Hz, 2.3g, 90 min.
Temp codeT4 (-40 ... +60 °C)
Standards and regulations
Rail applicationsEN 50121-4; EN 50121-3-2
Standard – Limitation of mains harmonic currentsEN 61000-3-2
Standard - Electrical safetyIEC 61010-2-201 (SELV)
Standard - Equipment safetyBG (design tested)
Standard – Protection against shock currents, basic requirements for protective separation in electrical equipmentEN 50178
Standard – Safety extra-low voltageIEC 61010-1 (SELV); IEC 61010-2-201 (PELV)
Standard - Safe isolationIEC 61010-2-201
Standard - safety for equipment for measurement, control, and laboratory useIEC 61010-1
Noxious gas testISA-S71.04-1985 G3 Harsh Group A
Approval - requirement of the semiconductor industry with regard to mains voltage dipsSEMI F47-0706 Compliance Certificate
Standards and regulations - Fire protection in rail vehicles
Standard designationFire protection in rail vehicles
Standards/specificationsEN 45545-2 (HL3)
Approvals
CSACAN/CSA-C22.2 No. 60950-1-07; CSA-C22.2 No. 107.1-01
Shipbuilding approvalDNV GL (EMC B), ABS, LR, RINA, NK, BV
UL approvalsUL/C-UL listed UL 508; UL/C-UL Recognized UL 60950-1 (3-wire + PE, star net); UL ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D T4 (Hazardous Location)

Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering. Brand names, logos and model names are trademarks of their respective owners, used only to identify the product. Details

Model numbers in this series (1)

Send us the complete code you need and we will quote it.

  • 2320924

About the QUINT-PS/3AC/24DC/20/CO

QUINT POWER power supply for DIN-rail mounting with maximum functionality. Please use the following item for new projects: 1343940 QUINT4-PS/3AC/24DC/20/CO. Primary-switched power supply unit QUINT POWER, Screw connection, SFB Technology (Selective Fuse Breaking), input: 3-phase, output: 24 V DC / 20 A, adjustable from 18 V DC ... 29.5 V DC Order no. 2320924.