Phoenix Contact UNO-PS/350-900DC/24DC/60W UNO-PS/350-900DC/24DC/60W DC/DC Converter

Model number
UNO-PS/350-900DC/24DC/60W

Primary-switched UNO DC/DC converter with wide range input, for DIN rail mounting, input: 350 ... 900 V DC, output: 24 V DC/60 W

Price and availability on request

We reply by email or phone, Monday to Saturday, 10:30 am to 6:30 pm.

Several models? Add each to your enquiry list and send them as one enquiry.

Request a quote

Sent with the product details: Phoenix Contact UNO-PS/350-900DC/24DC/60W UNO-PS/350-900DC/24DC/60W DC/DC Converter.

A phone number or an email address is needed, so we can reply.

We use these details only to reply to your enquiry. See our privacy notice.

Key features

  • Output 24 V DC, 2.5 A (-25 °C ... 55 °C)
  • Input 350 V DC ... 900 V DC
  • Efficiency > 90 %
  • Width 55 mm
  • Operating temperature -25 °C ... 70 °C (> 55° C derating - 2.5%/K)
  • Degree of protection IP20

Specifications

Input data - DC operation
Nominal input voltage range350 V DC ... 900 V DC
Input voltage range300 V DC ... 1000 V DC
Wide-range inputyes
Electric strength, max.≤ 1050 V DC
Voltage type of supply voltageDC
Inrush current< 1 A (typical)
Inrush current integral (I2t)< 0.38 A2s
Current consumption0.19 A (350 V DC); 0.07 A (1000 V DC)
Nominal power consumption69 VA
Typical response time< 1 s
Recommended breaker for input protection1 A (Characteristic gPV or comparable)
Recommended fuse for input protection1000 V DC
Output data
Efficiency> 90 %
Output characteristicU/I
Nominal output voltage24 V DC
Nominal output current (IN)2.5 A (-25 °C ... 55 °C)
Derating55 °C ... 70 °C (2.5 %/K)
Feedback voltage resistance< 35 V DC
Protection against overvoltage at the output (OVP)< 35 V DC
Control deviation< 1 % (change in load, static 10 % ... 90 %); < 3 % (Dynamic load change 10 % ... 90 %, 10 Hz); < 0.1 % (change in input voltage ±10 %)
Residual ripple< 20 mVPP (with nominal values)
Output power60 W
Maximum no-load power dissipation< 0.5 W
Power loss nominal load max.< 6.5 W
Rise time< 1 s (UOUT (10 % ... 90 %))
Response time< 2 ms
Connection in parallelyes, for redundancy and increased capacity
Connection in seriesno
Fuse protection (secondary side)electronic
Output data - Signal - DC OK active
Output descriptionUOUT > 0.9 x UN - High signal
Connection data - Input
Connection methodScrew connection
Conductor cross-section, rigid min.0.2 mm²
Conductor cross-section, rigid max.2.5 mm²
Conductor cross-section flexible min.0.2 mm²
Conductor cross-section flexible max.2.5 mm²
Conductor cross-section AWG min.24
Conductor cross-section AWG max.14
Stripping length8 mm
Screw threadM3
Tightening torque, min0.5 Nm
Tightening torque max0.6 Nm
Connection data - Output
Connection methodScrew connection
Conductor cross-section, rigid min.0.2 mm²
Conductor cross-section, rigid max.2.5 mm²
Conductor cross-section flexible min.0.2 mm²
Conductor cross-section flexible max.2.5 mm²
Conductor cross-section AWG min.24
Conductor cross-section AWG max.14
Stripping length8 mm
Screw threadM3
Tightening torque, min0.5 Nm
Tightening torque max0.6 Nm
Signaling
Types of signalingLED
Signaling - Signal output - DC OK active
Status display"DC OK" LED green
Electrical properties
Number of phases1
Insulation voltage input/output8 kV DC (type test); 3 kV DC (routine test); 8 kV
Product properties
Product typeDC/DC converters
Product familyUNO POWER
MTBF (IEC 61709, SN 29500)> 1160000 h (40 °C)
Product properties - Insulation characteristics
Protection classII
Overvoltage category (IEC 62109-1)II
Degree of pollution2
Dimensions
Width55 mm
Height90 mm
Depth84 mm
Dimensions - Installation dimensions
Installation distance right/left0 mm / 0 mm (≤ 70 °C)
Installation distance top/bottom30 mm / 30 mm (≤ 70 °C)
Mounting
Mounting typeDIN rail mounting
Assembly notealignable - 0 mm horizontally, 30 mm vertically
Mounting positionhorizontal DIN rail NS 35, EN 60715
With protective coatingno
Material specifications
Flammability rating according to UL 94 (housing / terminal blocks)V0
Housing materialPlastic; PC
Foot latch materialPOM (Polyoxymethylene)
Environmental and real-life conditions - Ambient conditions
Degree of protectionIP20
Ambient temperature (operation)-25 °C ... 70 °C (> 55° C derating - 2.5%/K)
Ambient temperature (storage/transport)-40 °C ... 85 °C
Ambient temperature (start-up type tested)-40 °C
Climatic class3K3 (in acc. with EN 60721)
Max. permissible relative humidity (operation)≤ 95 % (at 25 °C, non-condensing)
Shock18 ms, 30g, in each space direction (according to IEC 60068-2-27)
Vibration (operation)< 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6); 15 Hz ... 150 Hz, 2.3g, 90 min.
Standards and regulations
Standard – Limitation of mains harmonic currentsEN 61000-3-2
Standard - Electrical safetyIEC 62109-1
Standard – Safety extra-low voltageIEC 60950-1 (SELV) and EN 60204-1 (PELV)
Standard - Safe isolationDIN VDE 0100-410
Standard - Safety of power converters for use in photovoltaic power systemsIEC 62109-1
Approval - requirement of the semiconductor industry with regard to mains voltage dipsEN 61000-4-11
Approvals
UL approvalsUL 1741
Approvals - Conformity/Approvals
SIL in accordance with IEC 615080

Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering. Brand names, logos and model names are trademarks of their respective owners, used only to identify the product. Details

Model numbers in this series (1)

Send us the complete code you need and we will quote it.

  • 2906300

About the UNO-PS/350-900DC/24DC/60W

UNO POWER compact power supply for DIN-rail mounting, for price-oriented applications. Primary-switched UNO DC/DC converter with wide range input, for DIN rail mounting, input: 350 ... 900 V DC, output: 24 V DC/60 W Order no. 2906300.