Phoenix Contact UNO-PS/1AC/12DC/55W/H UNO-PS/1AC/12DC/55W/H Power Supply

Model number
UNO-PS/1AC/12DC/55W/H

Primary-switched power supply unit UNO POWER, Screw connection, DIN rail mounting, IEC 60335-1, input: 1-phase, output: 12 V DC / 4.6 A

Price and availability on request

We reply by email or phone, Monday to Saturday, 10:30 am to 6:30 pm.

Several models? Add each to your enquiry list and send them as one enquiry.

Request a quote

Sent with the product details: Phoenix Contact UNO-PS/1AC/12DC/55W/H UNO-PS/1AC/12DC/55W/H Power Supply.

A phone number or an email address is needed, so we can reply.

We use these details only to reply to your enquiry. See our privacy notice.

Key features

  • Output 12 V DC, 4.6 A (-25 °C ... 55 °C)
  • Input 100 V AC ... 240 V AC
  • Efficiency typ. 87 % (120 V AC)
  • Width 35 mm
  • Operating temperature -25 °C ... 70 °C (> 55 °C Derating - 2.5 %/K)
  • Degree of protection IP20

Specifications

Input data - AC operation
Nominal input voltage range100 V AC ... 240 V AC
Input voltage range85 V AC ... 264 V AC
Input voltage range AC85 V AC ... 264 V AC
Voltage type of supply voltageAC
Inrush current< 30 A (typical)
Inrush current integral (I2t)< 0.5 A2s
Frequency range (fN)50 Hz ... 60 Hz ±10 %
Mains buffering time> 20 ms (120 V AC); > 90 ms (230 V AC)
Current consumption1.3 A (100 V AC); 0.6 A (240 V AC)
Nominal power consumption127 VA
Protective circuitTransient surge protection; Varistor
Power factor0.49
Typical response time< 1 s
Input fuse2 A (slow-blow, internal)
Recommended breaker for input protection6 A ... 16 A (Characteristics B, C, D, K)
Output data
Efficiencytyp. 87 % (120 V AC); typ. 88 % (230 V AC)
Nominal output voltage12 V DC
Nominal output current (IN)4.6 A (-25 °C ... 55 °C)
Derating55 °C ... 70 °C (2.5 %/K)
Feedback voltage resistance< 25 V DC
Protection against overvoltage at the output (OVP)≤ 25 V DC
Control deviation< 1 % (change in load, static 10 % ... 90 %); < 3 % (Dynamic load change 10 % ... 90 %, 10 Hz); < 0.1 % (change in input voltage ±10 %)
Residual ripple< 30 mVPP (with nominal values)
Short-circuit-proofyes
Output power55 W
Maximum no-load power dissipation< 0.3 W
Power loss nominal load max.< 8 W
Rise time< 0.5 s (UOUT (10 % ... 90 %))
Response time< 2 ms
Connection in parallelyes, for redundancy and increased capacity
Connection in seriesyes
Fuse protection (secondary side)electronic
Connection data - Input
Connection methodScrew connection
Conductor cross-section, rigid min.0.2 mm²
Conductor cross-section, rigid max.2.5 mm²
Conductor cross-section flexible min.0.2 mm²
Conductor cross-section flexible max.2.5 mm²
Conductor cross-section AWG min.24
Conductor cross-section AWG max.14
Stripping length8 mm
Screw threadM3
Tightening torque, min0.5 Nm
Tightening torque max0.6 Nm
Connection data - Output
Connection methodScrew connection
Conductor cross-section, rigid min.0.2 mm²
Conductor cross-section, rigid max.2.5 mm²
Conductor cross-section flexible min.0.2 mm²
Conductor cross-section flexible max.2.5 mm²
Conductor cross-section AWG min.24
Conductor cross-section AWG max.14
Stripping length8 mm
Screw threadM3
Tightening torque, min0.5 Nm
Tightening torque max0.6 Nm
Signaling
Types of signalingLED
Electrical properties
Number of phases1
Product properties
Product typePower supply
Product familyUNO POWER
MTBF (IEC 61709, SN 29500)> 865000 h (40 °C)
Product properties - Insulation characteristics
Protection classII (in closed control cabinet)
Degree of pollution2
Dimensions
Width35 mm
Height90 mm
Depth84 mm
Dimensions - Installation dimensions
Installation distance right/left0 mm / 0 mm
Installation distance top/bottom30 mm / 30 mm
Mounting
Mounting typeDIN rail mounting
Assembly notealignable - 0 mm horizontally, 30 mm vertically
Mounting positionhorizontal DIN rail NS 35, EN 60715
With protective coatingno
Material specifications
Flammability rating according to UL 94 (housing / terminal blocks)V0
Housing materialPlastic; PC
Foot latch materialPOM (Polyoxymethylene)
Environmental and real-life conditions - Ambient conditions
Degree of protectionIP20
Ambient temperature (operation)-25 °C ... 70 °C (> 55 °C Derating - 2.5 %/K)
Ambient temperature (storage/transport)-40 °C ... 85 °C
Climatic class3K3 (in acc. with EN 60721)
Max. permissible relative humidity (operation)≤ 95 % (at 25 °C, non-condensing)
Shock18 ms, 30g, in each space direction (according to IEC 60068-2-27)
Vibration (operation)< 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6); 15 Hz ... 150 Hz, 2.3g, 90 min.
Standards and regulations
Budgetary standardIEC 60335-1
Standard – Limitation of mains harmonic currentsEN 61000-3-2
Standard - Electrical safetyIEC 62368-1 (SELV)
Standard – Safety extra-low voltageIEC 62368-1 (SELV) und EN 60204-1 (PELV)
Standard - Safe isolationDIN VDE 0100-410
Standard - Safety of transformersEN 61558-2-16
Approval - requirement of the semiconductor industry with regard to mains voltage dipsEN 61000-4-11
Standards and regulations - Mains voltage dips
Standard designationRequirement of the semiconductor industry with regard to mains voltage dips
Standards/specificationsSEMI F47 - 0706 (180 V AC)
Approvals
CSACAN/CSA-C22.2 No. 60950-1-07; CSA-C22.2 No. 107.1-01; CAN/CSA-C22.2 No. 213 Class I, Division 2, Groups A, B, C, D T4A (Hazardous Location)
UL approvalsUL/C-UL listed UL 508; UL/C-UL Listed ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D T4A (Hazardous Location); UL/C-UL Recognized UL 60950-1
Approvals - Conformity/Approvals
SIL in accordance with IEC 615080

Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering. Brand names, logos and model names are trademarks of their respective owners, used only to identify the product. Details

Model numbers in this series (2)

Send us the complete code you need and we will quote it.

  • 1088850
  • UNO-PS/1AC/12DC/ 55W/H

About the UNO-PS/1AC/12DC/55W/H

UNO POWER compact power supply for DIN-rail mounting, for price-oriented applications. Primary-switched power supply unit UNO POWER, Screw connection, DIN rail mounting, IEC 60335-1, input: 1-phase, output: 12 V DC / 4.6 A Order no. 1088850.