Phoenix Contact STEP3-PS/1AC/KNX/1280/LPT STEP3-PS/1AC/KNX/1280/LPT Bus Power Supply

Model number
STEP3-PS/1AC/KNX/1280/LPT

Primary-switched bus power supply STEP POWER, Lever Push-in connection, DIN rail or direct mounting, input: 1-phase, output: 30 V DC / 1280 mA

Price and availability on request

We reply by email or phone, Monday to Saturday, 10:30 am to 6:30 pm.

Several models? Add each to your enquiry list and send them as one enquiry.

Request a quote

Sent with the product details: Phoenix Contact STEP3-PS/1AC/KNX/1280/LPT STEP3-PS/1AC/KNX/1280/LPT Bus Power Supply.

A phone number or an email address is needed, so we can reply.

We use these details only to reply to your enquiry. See our privacy notice.

Key features

  • Output 30 V DC, 1280 mA (IBUS + IAUX) (38.4 W)
  • Efficiency > 89 % (120 V AC)
  • Width 72 mm
  • Operating temperature -10 °C ... 70 °C (Derating > 45 °C - 2 %/K)
  • Degree of protection IP20

Specifications

Input data - AC operation
Supply system configurationTN, TT, IT (PE)
Input voltage range100 V AC ... 240 V AC -15 % ... +10 %
Typical national grid voltage120 V AC; 230 V AC
Voltage type of supply voltageAC
Inrush currenttyp. 35 A (25 °C)
Inrush current integral (I2t)typ. 1.3 A2s
Frequency range (fN)50 Hz ... 60 Hz ±10 %
Mains buffering timetyp. 100 ms (100 V AC); typ. 100 ms (230 V AC)
Current consumption0.44 A (100 V AC); 0.38 A (240 V AC)
Protective circuitTransient surge protection; Varistor
Switch-on timetyp. 2 s
Device mains fuse4 A internal (device protection), slow-blow
Recommended breaker for input protection6 A ... 20 A (Characteristics B, C, D, K)
Discharge current to PE< 3.5 mA
Input data - DC operation
Input voltage range100 V DC ... 250 V DC -10 % ... +10 %
Voltage type of supply voltageDC
Current consumption0.43 A (100 V DC); 0.19 A (250 V DC)
Output data
Efficiency> 89 % (120 V AC); > 89 % (230 V AC)
Nominal output voltage30 V DC
Nominal output current (IN)1280 mA (IBUS + IAUX)
Short-circuit-proofyes
Derating> 45 °C ... 70 °C (2 % / K)
Crest factortyp. 3.4; typ. 4.08
Output power (PN)38.4 W
Connection in parallelno
Connection in seriesno
Feedback voltage resistance35 V DC
Protection against overvoltage at the output (OVP)35 V DC
Residual rippletyp. 100 mVPP
Control deviation< 0.5 % (Static load change 10 % ... 90 %); < 3 % (Dynamic load change 10 % ... 90 %, (10 Hz)); < 0.1 % (change in input voltage ±10 %)
Rise timetyp. 100 ms (UOut = 10 % ... 90 %); typ. 100 ms
Minimum no-load power dissipation< 0.6 W (120 V AC)
Maximum no-load power dissipation< 0.6 W (230 V AC)
Minimum nominal load power dissipation4.5 W (120 V AC)
Power loss nominal load max.3.5 W (230 V AC)
Integrated fuse protectionno
Connection data - Input
Position1.x
Connection data - Connection technology
Position marking1.1 (), 1.2 (N), 1.3 (L); 2.1 (BUS +), 2.2 (BUS -), 2.3 (AUX +), 2.4 (AUX -)
Connection data - Conductor connection
Connection methodLever Push-in connection; Push-in connection
rigid (Terminal block)0.2 mm² ... 4 mm²; 0.34 mm² ... 0.5 mm²
rigid (recommended)1.5 mm² (recommended); 0.5 mm² (recommended)
flexible (Klemme)0.2 mm² ... 4 mm²
flexible (empfohlen)1.5 mm² (recommended)
flexible with ferrule without plastic sleeve (Terminal block)0.2 mm² ... 2.5 mm²
flexible with ferrule without plastic sleeve (recommended)1.5 mm² (recommended)
flexible with ferrule with plastic sleeve (Terminal block)0.2 mm² ... 2.5 mm²
flexible with ferrule with plastic sleeve (recommended)1.5 mm² (recommended)
rigid (AWG) (Terminal block)24 ... 12 (Cu); 22 ... 20 (Cu)
rigid (AWG) (recommended)16 (recommended); 20 (recommended)
Stripping length (starr/flexibel)10 mm (solid)
Stripping length (Aderendhülse)10 mm (Ferrule)
AWG (Terminal block)22 ... 20 (Cu)
AWG (recommended)20 (recommended)
Stripping length5 mm ... 6 mm (solid)
Connection data - Output
Position2.x
Signaling - LED signaling
Types of signalingLED DC OK AUX; Display DC OK BUS; Display bar graph; Display temperature LED
FunctionVisual operating state display
Colorgreen; red, yellow, green (multicolor LED); red, yellow, green; red, green
LED off< 24 V DC (Off)
LED on (green), DC OK> 24 V DC (lit); 28 V DC  UOUT  31 V DC (LED lights up green)
Electrical properties
Number of phases1
Insulation voltage input/output4 kV AC (type test); 3.75 kV AC (routine test)
Product properties
Product typeBus power supply
Product familySTEP POWER
MTBF (IEC 61709, SN 29500)> 1888000 h (40 °C)
Product properties - Insulation characteristics
Protection classI
Overvoltage category (EN 61010-2-201)II (≤ 5000 m)
Overvoltage category (EN 62368-1)II (≤ 5000 m)
Overvoltage category (EN 62477-1)III (≤ 2000 m)
Overvoltage category (IEC 60664-1)III (≤ 2000 m)
Overvoltage category (IEC 63044-3)III (≤ 2000 m)
Overvoltage category (EN 61558-2-16)II ( 3000 m)
Degree of pollution2
Dimensions - Item dimensions
Width72 mm
Height90 mm
Depth61 mm
Depth (Device depth (DIN rail mounting))55 mm (Device depth (DIN rail mounting))
Horizontal pitch4 HP (DIN 43880)
Dimensions - Installation dimensions
Installation distance right/left0 mm / 0 mm
Installation distance top/bottom30 mm / 30 mm
Mounting
Mounting typeDIN rail or direct mounting
Assembly notealignable - 0 mm horizontally, 30 mm vertically
Mounting positionhorizontal DIN rail NS 35, EN 60715
With protective coatingno
Material specifications
Flammability rating according to UL 94V0 (Housing, terminal blocks, base latches)
Housing materialPlastic; PC
Foot latch materialPolyamid
Environmental and real-life conditions - Ambient conditions
Degree of protectionIP20
Ambient temperature (operation)-10 °C ... 70 °C (Derating > 45 °C - 2 %/K)
Ambient temperature (storage/transport)-30 °C ... 80 °C
Ambient temperature (start-up type tested)-25 °C
Maximum altitude≤ 5000 m
Maximum altitude (Output power derating)> 2000 m (Derating POUT - 10 %/1000 m)
Max. permissible relative humidity (operation)≤ 95 % (non-condensing)
Shock (operation)18 ms, 30g, per spatial direction (IEC 60068-2-27)
Vibration (operation)< 15 Hz, amplitude ±2.5 mm (IEC 60068-2-6); 15 Hz ... 150 Hz, 2.3g, 90 min.
Standards and regulations - Electrical safety
Standard designationElectrical safety; Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - General Requirements
Standards/specificationsIEC 61010-1 (SELV); IEC 63044-3
Standards and regulations - Protective extra-low voltage
Standard designationProtective extra-low voltage
Standards/specificationsIEC 61010-1 (SELV); IEC 61010-2-201 (PELV)
Standards and regulations - Safe isolation
Standard designationSafe isolation
Standards/specificationsIEC 61558-2-16
Standards and regulations - Safety requirements for electrical equipment for mea
Standard designationSafety requirements for electrical equipment for measurement, control, and laboratory use; Information technology - architecture for home electronic systems (KNX standard)
Standards/specificationsIEC 61010-1; IEC 14543-3
Approvals - UL
IdentificationUL/C-UL Listed UL 61010-1; UL/C-UL Listed UL 61010-2-201

Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering. Brand names, logos and model names are trademarks of their respective owners, used only to identify the product. Details

Model numbers in this series (1)

Send us the complete code you need and we will quote it.

  • 1477020

About the STEP3-PS/1AC/KNX/1280/LPT

STEP POWER primary-switched power supply for DIN-rail mounting, slim and compact, for distribution boards and building automation. Primary-switched bus power supply STEP POWER, Lever Push-in connection, DIN rail or direct mounting, input: 1-phase, output: 30 V DC / 1280 mA Order no. 1477020.