Phoenix Contact STEP3-PS/1AC/48DC/2.5/PT STEP3-PS/1AC/48DC/2.5/PT Power Supply
- Brand
- Phoenix Contact
- Model number
- STEP3-PS/1AC/48DC/2.5/PT
- Category
- DIN-Rail Power Supplies
Primary-switched power supply unit STEP POWER, Push-in connection, DIN rail or direct mounting, input: 1-phase, output: 48 V DC / 2.5 A, adjustable from 48 V DC ... 56 V DC, PoE application up to 120 W
Price and availability on request
We reply by email or phone, Monday to Saturday, 10:30 am to 6:30 pm.
Several models? Add each to your enquiry list and send them as one enquiry.
Key features
- Output 48 V DC, 2.5 A (120 W) (120 W)
- Efficiency > 94 % (120 V AC)
- Width 72 mm
- Operating temperature -10 °C ... 70 °C (Derating - > 50 °C
- Degree of protection IP20
Specifications
| Supply system configuration | Star network (TN, TT, IT (PE)) |
|---|---|
| Input voltage range | 120 V AC ... 240 V AC 10 % (120 W); 95 V AC ... 120 V AC 10 % (96 W) |
| Typical national grid voltage | 120 V AC; 230 V AC |
| Voltage type of supply voltage | AC |
| Inrush current | typ. 35 A |
| Inrush current integral (I2t) | typ. 0.03 A2s |
| Frequency range (fN) | 50 Hz ... 60 Hz ±10 % |
| Mains buffering time | typ. 19 ms (120 V AC); typ. 20 ms (230 V AC) |
| Current consumption | 1.11 A (120 V AC); 0.56 A (240 V AC) |
| Protective circuit | Transient surge protection; Varistor |
| Switch-on time | typ. 2 s |
| Device mains fuse | 4 A internal (device protection), slow-blow |
| Recommended breaker for input protection | 6 A ... 16 A (Characteristics B, C, D, K) |
| Discharge current to PE | < 0.25 mA |
| Input voltage range | 125 V DC ... 250 V DC 10 % (120 W); 99 V DC ... 125 V DC 10 % (96 W) |
|---|---|
| Voltage type of supply voltage | DC |
| Current consumption | 1.05 A (125 V DC); 0.51 A (250 V DC) |
| Efficiency | > 94 % (120 V AC); > 95.5 % (230 V AC) |
|---|---|
| Nominal output voltage | 48 V DC |
| Setting range of the output voltage (USet) | 48 V DC ... 56 V DC (> 48 V DC, constant capacity restricted) |
| Nominal output current (IN) | 2.5 A (120 W) |
| Nominal output current (IN) (IOut_Derating) | 2 A (96 W) |
| Short-circuit-proof | yes |
| No-load proof | yes |
| Derating | > 50 °C ... 70 °C (2 % / K) |
| Crest factor | typ. 1,64 (120 V AC); typ. 1.69 (230 V AC) |
| Output power (PN) | 120 W; 96 W |
| Connection in parallel | yes, for increasing power and redundancy with diode |
| Connection in series | yes, for increased output voltage |
| Feedback voltage resistance | ≤ 60 V DC |
| Protection against overvoltage at the output (OVP) | < 60 V DC |
| Residual ripple | typ. 100 mVPP |
| Control deviation | < 0.5 % (Static load change 10 % ... 90 %); < 3 % (Dynamic load change 10 % ... 90 %, (10 Hz)); < 0.1 % (change in input voltage ±10 %) |
| Rise time | typ. 100 ms (UOut = 10 % ... 90 %) |
| Minimum no-load power dissipation | < 0.21 W (120 V AC) |
| Maximum no-load power dissipation | < 0.21 W (230 V AC) |
| Minimum nominal load power dissipation | < 7.7 W (120 V AC) |
| Power loss nominal load max. | < 5.7 W (230 V AC) |
| Integrated fuse protection | no |
| Fuse protection (secondary side) | electronic |
| Position | 1.x |
|---|
| Position marking | 1.1, 1.2 (L), 1.3, 1.4 (N); 2.1, 2.2, 2.3, 2.4 (+), 2.5, 2.6, 2.7, 2.8 (-) |
|---|
| Connection method | Push-in connection |
|---|---|
| rigid (Terminal block) | 0.2 mm² ... 2.5 mm² |
| rigid (recommended) | 1 mm² (recommended) |
| flexible (Klemme) | 0.2 mm² ... 2.5 mm² |
| flexible (empfohlen) | 1 mm² (recommended) |
| flexible with ferrule without plastic sleeve (Terminal block) | 0.25 mm² ... 2.5 mm² |
| flexible with ferrule without plastic sleeve (recommended) | 1 mm² (recommended) |
| flexible with ferrule with plastic sleeve (Terminal block) | 0.25 mm² ... 1 mm² |
| flexible with ferrule with plastic sleeve (recommended) | 1 mm² (recommended) |
| AWG (recommended) | 17 |
| AWG (Terminal block) | 24 ... 12 (Cu) |
| Stripping length (starr/flexibel) | 10 mm (rigid/flexible/ferrule without plastic sleeve); 10 mm (rigid/flexible) |
| Stripping length (Aderendhülse) | 10 mm (Ferrule with plastic sleeve); 10 mm (Ferrule) |
| Position | 2.x |
|---|
| Types of signaling | LED DC OK - signal state operation (UN = 24 V DC, IOut = IN) |
|---|---|
| Function | Visual operating state display |
| Color | green |
| LED off | Supply voltage input AC not present (Off) |
| LED off 2 | UOut <44 V DC (Off) |
| LED on (green), DC OK | UOut >44 V DC (on) |
| Number of phases | 1 |
|---|
| Product type | Power supply |
|---|---|
| Product family | STEP POWER |
| MTBF (IEC 61709, SN 29500) | > 1372000 h (25 °C); > 758000 h (40 °C); > 495000 h (50 °C) |
| Environmental protection directive | RoHS Directive 2011/65/EU; WEEE; Reach |
| Protection class | II (in closed control cabinet) |
|---|---|
| Overvoltage category (EN 61010-1) | II (≤ 5000 m) |
| Overvoltage category (EN 62477-1) | III (≤ 2000 m) |
| Degree of pollution | 2 |
| Width | 72 mm |
|---|---|
| Height | 90 mm |
| Depth | 61 mm |
| Depth (Device depth (DIN rail mounting)) | 55 mm (Device depth (DIN rail mounting)) |
| Horizontal pitch | 4 HP (DIN 43880) |
| Installation distance right/left | 0 mm / 0 mm |
|---|---|
| Installation distance top/bottom | 30 mm / 30 mm |
| Mounting type | DIN rail or direct mounting |
|---|---|
| Assembly note | alignable - 0 mm horizontally, 30 mm vertically |
| Mounting position | horizontal DIN rail NS 35, EN 60715 |
| With protective coating | no |
| Housing material | Plastic; PC |
|---|---|
| Foot latch material | Polyamid |
| Degree of protection | IP20 |
|---|---|
| Ambient temperature (operation) | -10 °C ... 70 °C (Derating - > 50 °C; 2 %/K) |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Ambient temperature (start-up type tested) | -25 °C |
| Maximum altitude | ≤ 5000 m (> 2000 m, Derating - 10 %/1000 m) |
| Max. permissible relative humidity (operation) | ≤ 95 % (at 25 °C, non-condensing) |
| Shock (operation) | 18 ms, 30g, per spatial direction (IEC 60068-2-27) |
| Vibration (operation) | < 15 Hz, amplitude ±2.5 mm (IEC 60068-2-6); 15 Hz ... 150 Hz, 2.3g, 90 min. |
| Temp code | T4 (-10 ... +70 °C; > 50 °C, Derating - 2 %/K) |
| Standard designation | Safety extra-low voltage |
|---|---|
| Standards/specifications | IEC 61010-1 (SELV) |
| Standard designation | Protective extra-low voltage |
|---|---|
| Standards/specifications | IEC 61010-2-201 (PELV) |
| Standard designation | Safe isolation |
|---|---|
| Standards/specifications | IEC 61558-2-16 |
| Standard designation | Low-voltage power supplies, DC output |
|---|---|
| Standards/specifications | EN 61204-3 |
| Standard designation | Safety requirements for electrical equipment for measurement, control, and laboratory use |
|---|---|
| Standards/specifications | IEC 61010-1 |
| Standard designation | Safety of electrical devices for household use and similar purposes; Power over Ethernet |
|---|---|
| Standards/specifications | DIN EN 60335-1; IEEE 802.3 (145.4.1 insulation) |
| Identification | UL/C-UL Listed UL 61010-1; UL/C-UL Listed UL 61010-2-201; UL/C-UL Listed ANSI/UL 121201 Class I, Division 2, Groups A, B, C, D (Hazardous Location) |
|---|
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering. Brand names, logos and model names are trademarks of their respective owners, used only to identify the product. Details
Model numbers in this series (1)
Send us the complete code you need and we will quote it.
1285035
About the STEP3-PS/1AC/48DC/2.5/PT
STEP POWER primary-switched power supply for DIN-rail mounting, slim and compact, for distribution boards and building automation. Primary-switched power supply unit STEP POWER, Push-in connection, DIN rail or direct mounting, input: 1-phase, output: 48 V DC / 2.5 A, adjustable from 48 V DC ... 56 V DC, PoE application up to 120 W Order no. 1285035.